Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Please help with Spektrum DX8 G2 setup

Reply
 
LinkBack Thread Tools Display Modes
Old 01-19-2019, 11:45 PM   #1
Rock Crawler
 
Join Date: Jan 2006
Location: Connecticut
Posts: 784
Default Please help with Spektrum DX8 G2 setup

I cannot calibrate the Hobbywing 1080 ESC on the throttle channel. Even when I start with the stick in the middle. Iíve been at this for 2 hours. Using an AR8000 receiver. Was able to bind the receiver (with throttle stick all the way down) but that is it.

If I plug the steering servo into any of the other channels and move the stick that controls that particular channel I get nothing either.

Any ideas....Iím at my wits end.
jamesbernatchez is offline   Reply With Quote
Sponsored Links
Old 01-21-2019, 12:43 PM   #2
Newbie
 
Join Date: Jan 2019
Location: Western NC
Posts: 7
Default Re: Please help with Spektrum DX8 G2 setup

Are you positive you are bound correctly. I'm not in my shop now, but doesn't the AR8000 require a sat? I've only used this in aircraft.

G.
garyji is offline   Reply With Quote
Old 01-21-2019, 08:59 PM   #3
Rock Crawler
 
Join Date: Jan 2006
Location: Connecticut
Posts: 784
Default Re: Please help with Spektrum DX8 G2 setup

Quote:
Originally Posted by garyji View Post
Are you positive you are bound correctly. I'm not in my shop now, but doesn't the AR8000 require a sat? I've only used this in aircraft.

G.
Yes, once we plugged in the other receiver that plugs into the AR8000 it worked as it should. The kid who helped me at the Hobby shop didnít know that. He did not give me the satellite receiver with it, as the receiver was pulled from another transmitter set and he sold me it separately.
jamesbernatchez is offline   Reply With Quote
Reply



Please help with Spektrum DX8 G2 setup - Similar Threads
Thread Thread Starter Forum Replies Last Post
Spektrum DX8 - Channel Mixing JoeConti Electronics 17 09-17-2018 02:37 PM
Spektrum DX8 - Radio stick setup shefik Traxxas Crawlers 0 05-15-2017 11:20 AM
Dx8 setup for moa sfpumps Electronics 1 06-18-2013 06:56 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com