RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Hobbywing 1080 esc (http://www.rccrawler.com/forum/electronics/607242-hobbywing-1080-esc.html)

Bjorn 03-18-2019 01:36 AM

Hobbywing 1080 esc
I just finished building my new trailfinder2, I'm using a quick run 1080, but when I bound the truck, the throttle was reversed and it is low speed forward, high speed reversed, so I switched the throttle reversed, and now forward and back are correct, but it's still slow forward and fast in reverse. Any thoughts? I have checked all my wiring, it's all correct. I'm using a dx4c transmitter. Your ideas will be much appreciated.

Ninomaniac 03-18-2019 02:15 AM

Re: Hobbywing 1080 esc
You should have swapped the motor wires instead of throttle reversing.

Anyway, you can set the rev speed to 100% using the program card and bam, done. If you don't feel like swapping the leads.

BIGW0RM 03-18-2019 12:36 PM

Re: Hobbywing 1080 esc
^^^ What he said. I had the same issue once. Flip the motor wires is best.

All times are GMT -6. The time now is 03:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com