Tactic (and Traxxas) Transmitter Camera Mounts - Who else?

[durok]

Luxury RC makes them in a few colors, for smartphones and GoPros - pretty nice, available at Amazon:

[durok]

And I know it was mentioned before somewhere, but Traxxas has one for their own TQi transmitters - so, when are the 3D printing gurus gonna make them for other brands, FlySky perhaps?

[Jboucher]

I bought a cheap cellphone holder magnet for cars.
Glued it on top of my Radiolink RC4GS. Now I just put my cellphone on it and I can take pictures and videos while crawling.

Sent from my Pixel 2 XL using Tapatalk

[Jim85IROC]

I use a $1 clamp with a 1/4 20 bolt through it to hold a camera mount.

[soze]

I like to use good ol' 3M tape myself.

[Topher Builds]

Originally Posted by durok

And I know it was mentioned before somewhere, but Traxxas has one for their own TQi transmitters - so, when are the 3D printing gurus gonna make them for other brands, FlySky perhaps?

Anyone with one of these know if it will fit an iPhone 8+ with a slim case?

[durok]

I have my Pixel XL first generation with a medium thickness case mounted in mine, works fine... it's adjustable.

[HumboldtEF]

I'm looking around to see if I can find any of these models so I can make my own version to 3D print, anyone know of any free sources?

EDIT: I found one for the Spektrum DX3 and DX4 https://www.thingiverse.com/thing:1700124

[soze]

Originally Posted by HumboldtEF

I'm looking around to see if I can find any of these models so I can make my own version to 3D print, anyone know of any free sources?

I've been meaning to try designing one and having my friend print it out myself. I've now got a gimbal that I use with my GoPro. So I need a way to mount the stick/gimbal. My hands get tired holding both the gimbal stick and transmitter in one hand. I'm sure my driving suffers from it too.

[HumboldtEF]

Originally Posted by soze

I've been meaning to try designing one and having my friend print it out myself. I've now got a gimbal that I use with my GoPro. So I need a way to mount the stick/gimbal. My hands get tired holding both the gimbal stick and transmitter in one hand. I'm sure my driving suffers from it too.

I noticed your footage has been really stable lately, I figure you must have got a Gimbal. If you dont mind me asking what kind did you get?

[soze]

Originally Posted by HumboldtEF

I noticed your footage has been really stable lately, I figure you must have got a Gimbal. If you dont mind me asking what kind did you get?

I have a Hohem iSteady Pro 3-axis gimbal.

I actually have this attached to a selfie stick, and then hold the selfie stick + transmitter in the same hand. Like I said, my hand gets tired, and my driving suffers.

I've had ideas of what I want to do, but I've just been too busy to get around to it.

[soze]

Lately, I've just been using this with my GoPro 7

Smatree Ajustable Jaws Flex Clamp Mount 13.4" Gooseneck Extension

[JDM74]

Originally Posted by durok

And I know it was mentioned before somewhere, but Traxxas has one for their own TQi transmitters - so, when are the 3D printing gurus gonna make them for other brands, FlySky perhaps?

This works really well for me because I have my GoPro mounted on a mini tripod and I can run the camera from my phone (start/stop video/check position) all while still controlling my rig. When I'm done I just pickup my tripod and move to the next spot.

[GForceSS]

Originally Posted by Topher Builds

Anyone with one of these know if it will fit an iPhone 8+ with a slim case?

I have two Traxxas phone mounts. Best trail addition I’ve made. The holder with expand out to 3.5 inches. I have a iPhone 5 with a fat otter box case and it’s super secure.