RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Recommendations for transmitters with 3 position switches? (http://www.rccrawler.com/forum/electronics/611870-recommendations-transmitters-3-position-switches.html)

MeanTT 09-21-2019 07:38 PM

Recommendations for transmitters with 3 position switches?
 
I have used flysky transmitters with great success. I would like to upgrade for new models and I’m tired of using a separate winch controller. I need at least 4 channels.

What’s a multi-model transmitter that folks are liking these days? Don’t need any fancy deals, just a 3 position switch and hopefully not receivers that cost 80 bucks a pop.

(My VS4-10 needs a new transmitter that I can actually read in the sun - which is not the flysky and my servo winch needs more seamless control).

Thanks all!

Jboucher 09-21-2019 08:30 PM

Re: Recommendations for transmitters with 3 position switches?
 
I got the Radiolink RC4GS, about 50$ and 4 channels.
The receivers are dirt cheap as well.

Sent from my Pixel 2 XL using Tapatalk

indybama 09-21-2019 08:37 PM

Re: Recommendations for transmitters with 3 position switches?
 
Ive got a flysky gt5 with 6ch. No problems readin the display. Ive got my winch on ch6 which is a dial n it works great

Sent from my SM-J327VPP using Tapatalk

Ghonda99 09-21-2019 08:48 PM

Re: Recommendations for transmitters with 3 position switches?
 
I picked up a spektrum dx5c about a year ago and I like it a lot. All the settings you could want, light and comfortable in your hand, only uses 4aa batteries. The 5 channel receivers are $60 but if you don’t need that many channels you can use a receiver with however many channels you need. I have a savage flux that only needs 2 channels and it was $30.

JatoTheRipper 09-21-2019 08:49 PM

Re: Recommendations for transmitters with 3 position switches?
 
Quote:

Originally Posted by indybama (Post 5964167)
Ive got a flysky gt5 with 6ch. No problems readin the display. Ive got my winch on ch6 which is a dial n it works great

Sent from my SM-J327VPP using Tapatalk

I should know this since I have one, but I don't because I've barely used it. Does the GT5 have a 3 position switch?

soze 09-21-2019 09:35 PM

Re: Recommendations for transmitters with 3 position switches?
 
Quote:

Originally Posted by JatoTheRipper (Post 5964172)
I should know this since I have one, but I don't because I've barely used it. Does the GT5 have a 3 position switch?

Yes.

Sent from my LG-H931 using Tapatalk

JatoTheRipper 09-21-2019 09:44 PM

Re: Recommendations for transmitters with 3 position switches?
 
Quote:

Originally Posted by soze (Post 5964179)
Yes.

Sent from my LG-H931 using Tapatalk


Thanks! "thumbsup"

MeanTT 09-21-2019 10:41 PM

Re: Recommendations for transmitters with 3 position switches?
 
Thanks all. Pulled another flysky off of Amazon. Looking forward to the new transmitter! Cheaper than the last flysky! Hooray!

indybama 09-22-2019 04:38 AM

Re: Recommendations for transmitters with 3 position switches?
 
Quote:

Originally Posted by MeanTT (Post 5964185)
Thanks all. Pulled another flysky off of Amazon. Looking forward to the new transmitter! Cheaper than the last flysky! Hooray!

Love my gt5, plus extra recievers are like $20

Sent from my SM-J327VPP using Tapatalk


All times are GMT -6. The time now is 12:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com