Unknown light kit.. Wiring problem Hello I've bought an used cherokee body with a weird light kit that I don't know how to wire up. I have a free 4 wire connector, I'm missing the 2 pin connector that goes to the rx, and I believe I need something in between, since it's a 8 LED kit. Correct me if I'm wrong... https://imgur.com/gallery/ZgWFtep I tried asking in axial subforum, but to no avail.. |
Re: Unknown light kit.. Wiring problem Taking a GIANT guess here, but that looks like an integrated lighting control and LVC alarm. That plug looks like it goes on the balance port of a 3S lipo. |
Re: Unknown light kit.. Wiring problem yeah.. that was a giant guess... the plug is male, same as the balance plug on the lipo... So much mystery.. and I cant reach the previous owner.. |
Re: Unknown light kit.. Wiring problem It shouldn't be a male connector on the balance plug of the LiPo, it's always female. |
Re: Unknown light kit.. Wiring problem https://cdn-global-hk.hobbyking.com/...67000272-0.jpg it's male.. I found out what this is.. but don't know how to acquire the missing part... http://www.rc-willpower.com/Cart/ind...roduct_id=9247 I'm missing the "interface" between the Rx and the controller |
Re: Unknown light kit.. Wiring problem Hummm ... my anatomy lessons might be a bit old but last time I checked, this is male (front one of course) : https://imgaz1.staticbg.com/thumb/la...82c0dd1f2a.JPG and this is female : https://cdn.shopify.com/s/files/1/00...g?v=1542593485 Plus you never install male connectors on a battery ... it would be the best way to short it against a metallic part. |
Re: Unknown light kit.. Wiring problem Well.. Just to refresh your memory, male parts go INSIDE female parts. In most normal mammals, that should be the way things work. Male parts don't envelop female parts. Same with the xt60.. It goes inside the hollow female xt60 connector. Ergo, hollow one is female, because the male part goes in it.. Not around it :) |
Re: Unknown light kit.. Wiring problem Aside the anatomy lesson.. I miss the interface.. A splitter that sends the signal from ch1 and ch2 to corresponding pins and LEDs |
Re: Unknown light kit.. Wiring problem In electronics, the male and female part of a connector is not the housing but the contact ... same as with Scots, it's not the kilt that makes a male or female, but what's inside. With XT60, it's more clear. Male : https://www.grizzlyairsoft.com/files...ormal/2570.jpg Female : https://ae01.alicdn.com/kf/HTB1yfEVQ...po-Battery.jpg |
Re: Unknown light kit.. Wiring problem ok.. this conversation is getting more weird by the moment, and I'm not getting any answers lol.... |
All times are GMT -6. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com