SHV500 V3..... Yes

[JatoTheRipper]

Originally Posted by svt923

Apparently the V3 was very conservatively rated at the same specs as the V2 but I guess actual measurements were done and they are a tad higher than originally thought (like 130-160 oz more).

Torque @ 11.1v: 32.4 kg/cm (580 oz/inch)
Speed @ 11.1v: 0.10 sec
Torque @ 14v: 37.5 kg/cm (680 oz/inch)
Speed @ 14v: 0.08 sec

The website has been updated with the new specs.

Noice!

[durok]

Some more v2 Puller Pro motors have been added as well!

[themountain]

Originally Posted by svt923

Apparently the V3 was very conservatively rated at the same specs as the V2 but I guess actual measurements were done and they are a tad higher than originally thought (like 130-160 oz more).

Torque @ 11.1v: 32.4 kg/cm (580 oz/inch)
Speed @ 11.1v: 0.10 sec
Torque @ 14v: 37.5 kg/cm (680 oz/inch)
Speed @ 14v: 0.08 sec

The website has been updated with the new specs.

Rob Holmes send me a message saying that he probably underrated the figures ...the torque is very close to 700oz/inch.... "..
just released on the website. I under rated it quite a bit, its really closer to 700oz on 4s."

[JatoTheRipper]

Originally Posted by durok

Some more v2 Puller Pro motors have been added as well!

The 90° sensor ports are such an awesome addition!

[JohnRobHolmes]

You guys beat me to the release here! I bumped up the power and beefed up the drivetrain a lot.

[Ola.]

Shv500v3 and a PP stubby 2700 v2 allready on its way!

You make make an affordable 3s ready servo winch as well John
As small and light as possible, with «ok» power and speed!

[punkindrublik]

Originally Posted by JohnRobHolmes

You guys beat me to the release here! I bumped up the power and beefed up the drivetrain a lot.

Absolutely love em!

Only thing that sucks is it's too tall and the mounting lugs are too high for one to fit in my Berg

But I've got a couple of other crawlers that are extremely happy right now!

[Bard]

Put my servo in lastnight. Holy crap what a difference compared to the Chinese Amazon servo I was running. Only thing I've noticed is it talks a little when sitting still. Might be my radio sending the slightest signal. Not a big deal, just a new sound.

[Tz82]

Originally Posted by Bard

Only thing I've noticed is it talks a little when sitting still. Might be my radio sending the slightest signal. Not a big deal, just a new sound.

Has anyone else experienced the chatter while sitting still?




Sent from my iPhone using Tapatalk

[Ola.]

Originally Posted by Tz82

Has anyone else experienced the chatter while sitting still?




Sent from my iPhone using Tapatalk

Cant say i hear any chatter in mine.

Rcreview test is out;
https://youtu.be/trgpe-b84PM

[Bard]

Hmm, I wonder mine does it?

[Topher Builds]

Originally Posted by Ola.

Cant say i hear any chatter in mine.

Rcreview test is out;
https://youtu.be/trgpe-b84PM

Hot damn that’s impressive. Thanks for sharing.

Can’t wait to get one or three of these!

[twade984]

My question is, when will they be back in stock?

[Joshs4x4toyz]

Originally Posted by twade984

My question is, when will they be back in stock?

Thats the important question lol