Mamba X and 2700 Holmes stubby for which car Hey guys! So I got the parts listed above. Which car do you guys recommend on putting these part on? This is my first build Part so far Mamba X Holmes hobby 2700kv stubby Ko propo RR (radio) Ko propo FH418 receiver Still need Car kit LiPo Servo Please help Thank you Sent from my iPhone using Tapatalk |
Re: Mamba X and 2700 Holmes stubby for which car Honestly, you are kind of going at this backwards, normally you have the kit first, then get the electronics to match. Anyhoo… From the HH videos I have watched, the stubby motors are made more for the lighter side of the hobby because they do not dissipate heat as well as the larger Revolvers. So, you'd what a rig around six pounds or less. With that, recommend going with a Element Enduro. |
Re: Mamba X and 2700 Holmes stubby for which car The Revolver does not come in a 2700kv - what he most likely has is a Puller Pro 2700kv Stubby...;-) However, the recommendations stay the same - run something relatively lightweight, such as the Enduro - or a Capra, if you'd rather a less scale truck and more pure crawler rig. |
Re: Mamba X and 2700 Holmes stubby for which car How about a TRX4? Sent from my iPhone using Tapatalk |
Re: Mamba X and 2700 Holmes stubby for which car I'd be wanting a standard size Puller Pro for use in a TRX-4, myself - it's a little heavy. If you go that route, get a Sport version as it's a bit lighter than the standard TRX-4. |
Re: Mamba X and 2700 Holmes stubby for which car I've got a Mamba X/2200kv Stubby in my Capra, and a Mamba X/3500kv in my Enduro. Your combo should work in most any rig that's available today. |
All times are GMT -6. The time now is 02:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com