Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics


Thread: Power Servo's from Balance Port

LinkBack Thread Tools Display Modes
Old 08-01-2020, 09:45 PM   #1
Join Date: May 2020
Location: Columbus
Posts: 47
Default Power Servo's from Balance Port

I have 2 HH Servos (4ws) which are direct to battery power. I am running them with the 3brothers balance port wiring adapter which lets me tie both servos into the balance port on the battery. Any feedback on if this setup is ok?
bexline is offline   Reply With Quote
Sponsored Links
Old 08-02-2020, 08:41 AM   #2
I wanna be Dave
Join Date: Jul 2005
Location: North Idaho
Posts: 3,287
Default Re: Power Servo's from Balance Port

Sure, the tron don't care, and that 22awg wire is big enough to carry the current. I would find it a bit of a pain in the butt to have to connect two connectors all of the time; and, on some packs, the balance port wires are not the best. I think I would just wire up a JST (or other simular plug) coming off of the main battery plug that that everything gets plugged in and not have to be fiddled with.
Greatscott is offline   Reply With Quote

Power Servo's from Balance Port - Similar Threads
Thread Thread Starter Forum Replies Last Post
led lights in balance port midwest_rippa Electronics 2 03-13-2018 03:24 PM
Losi Lipo Works On Flight Power/Thunder Power Balance plate?? fa1rch1ld Electronics 0 01-18-2010 11:46 PM
hook up bec to lipo balance port timo992001 Electronics 3 03-14-2009 11:46 AM
Servo's don't seem to be getting the power they need? jeepfreek Electronics 10 03-13-2008 10:55 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 05:15 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com