Hobbywing AXE misaligned terminals
 

I opened up the speed controller and the A B C terminals are not centered. Anything to worry about or potential issues in the future? Is it worth contacting Hobbywing?

https://uploads.tapatalk-cdn.com/202...65a1e00a8c.jpg


Sent from my iPhone using Tapatalk

Re: Hobbywing AXE misaligned terminals
 

https://uploads.tapatalk-cdn.com/202...38885c6492.jpg


Sent from my iPhone using Tapatalk

Re: Hobbywing AXE misaligned terminals
 

It looks like this is normal https://www.rpphobby.com/product_p/hwi38020254.htm

You dont even have to zoom in to see theres and offset to the center terminal.

They probably needed a little extra space for the lead passing between.

EDIT: never mind, I misinterpreted that.

I see now you're picking up on the angle of the groove on top of the terminals. If they feel firmly attached I wouldnt worry about it.

Re: Hobbywing AXE misaligned terminals
 

There are certianly more important things in life to worry about!

Re: Hobbywing AXE misaligned terminals
 

If one of the pins were bent off-center, I would worry, but it was obviously made that way, so I am really not sure why you'd be concerned.

Re: Hobbywing AXE misaligned terminals
 

Couldn’t agree more!

These were noticeably off and didn’t know if anyone else had any negative experience because of it.

Thanks to all who’ve replied. It’s installed and running great.


Sent from my iPhone using Tapatalk