Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Tekin FXR issue

Reply
 
LinkBack Thread Tools Display Modes
Old 12-06-2020, 11:21 AM   #1
Pebble Pounder
 
Join Date: Apr 2008
Location: Marion
Posts: 136
Default Tekin FXR issue

Im getting all my older builds out and going through everything . I am running a FXR receiver and a spektrum 6200 receiver and a spektrum DX6i radio. My problem is. I have tried recalibrating the FXR to the receiver but no matter what i do, if the signal is lost from receiver to radio, it stays with the last command. Such as full throttle stays that way until it reconnects. My batteries went dead and lost signal and kept running . How do i set failsafe to neutral?
Harleyrocker is offline   Reply With Quote
Sponsored Links
Old 12-06-2020, 12:22 PM   #2
I wanna be Dave
 
Join Date: Jun 2016
Location: Austin
Posts: 6,010
Default Re: Tekin FXR issue

Quote:
Originally Posted by Harleyrocker View Post
Im getting all my older builds out and going through everything . I am running a FXR ESC and a spektrum 6200 receiver and a spektrum DX6i radio. My problem is. I have tried recalibrating the FXR to the receiver but no matter what i do, if the signal is lost from receiver to radio, it stays with the last command. Such as full throttle stays that way until it reconnects. My batteries went dead and lost signal and kept running . How do i set failsafe to neutral?
Edited your post a bit for clarity...

Post 19 on this thread:

Hobbywing 1060 has no failsafe?!

The Rx is where you set the failsafe, not the ESC...

HTH!



Manual for SR6200 Rx: https://www.spektrumrc.com/ProdInfo/...-Manual-EN.pdf

See pages 6 & 7 for binding and failsafe discussion

Last edited by durok; 12-06-2020 at 12:31 PM.
durok is offline   Reply With Quote
Old 12-06-2020, 03:01 PM   #3
Pebble Pounder
 
Join Date: Apr 2008
Location: Marion
Posts: 136
Default Re: Tekin FXR issue

Durock , thanks for the editing. Ive had a extremely bad weekend. And im an idiot . I knew that the radio had the failsafe , im just out of sorts right now. Thanks for your reply . I got it all fixed up now.
Harleyrocker is offline   Reply With Quote
Old 12-06-2020, 10:26 PM   #4
I wanna be Dave
 
Join Date: Jun 2016
Location: Austin
Posts: 6,010
Default Re: Tekin FXR issue

Quote:
Originally Posted by Harleyrocker View Post
Durock , thanks for the editing. Ive had a extremely bad weekend. And im an idiot . I knew that the radio had the failsafe , im just out of sorts right now. Thanks for your reply . I got it all fixed up now.
Glad you got it working again!

durok is offline   Reply With Quote
Old 12-07-2020, 09:25 PM   #5
I wanna be Dave
 
Join Date: Feb 2017
Location: My mothers basement
Posts: 2,128
Default Re: Tekin FXR issue

Spektrum receivers default to 1500us with no signal from the TX. I have no idea how to change that. But that's neutral for most PWM RC receiver's I believe as well. My Spectrums don't care if I turn the car on or off regardless of the transmitters power state. unlike some other recievers, Spektrum receivers also put out 1500us as soon as they get power even if the transmitter is off, unlike say tactic receiver that don't put out any signal until the tx/rx pairs.
Voodoobrew is offline   Reply With Quote
Reply



Tekin FXR issue - Similar Threads
Thread Thread Starter Forum Replies Last Post
new tekin fxr issue BoarKilla24 Electronics 7 03-10-2013 06:33 AM
Mamba Max , Tekin FXR or Tekin FXR PRO? TheHeadHunter Electronics 21 06-21-2012 08:15 AM
Tekin FXR and FXR-pro ESCs in stock JohnRobHolmes Holmes Hobbies 35 09-17-2009 09:40 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com