Programming 3rd channel on 4pk
 

I have read the futaba manual 50x and still do not understand setting up the 3rd channel as a 2 position switch.
Want to set the third channel to be able to do dig on my vs410.
Would prefer 3 positions if possible but two will work.
Looked for YouTube videos but could not find anything.
Need a video or a really dumbed down explanation 🤣

Thanks in advance for any help👍

Programming 3rd channel on 4pk
 

You need to set a DS to 100.
That will give you a 3 position, another ds set to 2P. Now you get both, 3 gives 4wd, freewheel, rear locked.
I also set a two position for quick shifting w/o freewheel
Harley shows that a couple of places...

https://youtu.be/zH-VM2yIPf8

Hang up and Drive