Tower Pro MG995

[mr.maxx]

Does anyone know what replacment case will fit these servos? I have a new one that I broke the mounting ears off...

Thanks,

[BrandO]

This is a good question. I have a collection of these with bad cases. The top cover gets worn from the idler gear pin. Everything else in the servo is fine. Just need to find some replacement cases. I tried a Hitec 645 case. It is very close but not close enough. I am thinking one of the other hitec servos. Just not sure which case.

[cartronicshn]

i also have a couple 995 with worn covers, i have 945 also with the same problem, i thought the hi tec 645 would fit:-(

[run2jeepn]

I'm checking into it as we speak. I haven't had this issues myself and no one has brought them up since I started selling them. I'll see what I can come up with.

[run2jeepn]

I will have replacment Cases for the MG995 and MG945 in a few days. They will be $3.25 Shipped each. I've also order two 1/4 Scale Sevro's that are 20kg (280oz) of torque. I'm going to test them out and see how they do. If they work out. I will add those to my site. Should be in the ball park of $30 bucks.

[cartronicshn]

i'll take 4 servo cases when you get them, and some mores servos also

[BrandO]

Originally Posted by run2jeepn

I will have replacment Cases for the MG995 and MG945 in a few days. They will be $3.25 Shipped each. I've also order two 1/4 Scale Sevro's that are 20kg (280oz) of torque. I'm going to test them out and see how they do. If they work out. I will add those to my site. Should be in the ball park of $30 bucks.

Thats good news. I will take 4 or 5 cases when they come in. I can send you a bad case or two. That way you will know what we are talking about. A number of guys here in our club have had the same problem.