Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Reedy or Holmes for my Capra?

Reply
 
LinkBack Thread Tools Display Modes
Old 06-26-2021, 07:39 PM   #1
Rock Stacker
 
Join Date: Mar 2021
Location: Florida
Posts: 79
Default Reedy or Holmes for my Capra?

I'm trying to figure out if changing my motor will help at all with my Capra before I get fed up and just go brushless, lol.

I'm currently running a Holmes Crawlmaster sport 16T and while it does have great low speed control it seems to be lacking torque and drag brake. I've read the Expert version is vastly better and I've also seen the Reedy Radon 2 16T which is another rebuildable 5 slot 540 motor. All suggestions are welcome!

My question is, do I?

A. Stick with my HH Crawlmaster sport.
B. Get the Crawlmaster Expert.
C. Get the Reedy Radon 2.
D. They all suck just go brushless.
Blaze0303 is offline   Reply With Quote
Sponsored Links
Old 06-26-2021, 07:43 PM   #2
I wanna be Dave
 
CODYBOY's Avatar
 
Join Date: Apr 2010
Location: Oakridge
Posts: 3,305
Default Re: Reedy or Holmes for my Capra?

Quote:
Originally Posted by Blaze0303 View Post
I'm trying to figure out if changing my motor will help at all with my Capra before I get fed up and just go brushless, lol.

I'm currently running a Holmes Crawlmaster sport 16T and while it does have great low speed control it seems to be lacking torque and drag brake. I've read the Expert version is vastly better and I've also seen the Reedy Radon 2 16T which is another rebuildable 5 slot 540 motor. All suggestions are welcome!

My question is, do I?

A. Stick with my HH Crawlmaster sport.
B. Get the Crawlmaster Expert.
C. Get the Reedy Radon 2.
D. They all suck just go brushless.
The expert is a good motor, but I say just go brushless.
Ernie
CODYBOY is offline   Reply With Quote
Old 06-26-2021, 08:32 PM   #3
I wanna be Dave
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,475
Default Re: Reedy or Holmes for my Capra?

I dont own a Capra but I do know they're geared a bit higher than most crawlers so that alone is gonna reduce torque and the drag brake strength.

Check out the Revolvers if you want the best torque and drag brake.
HumboldtEF is offline   Reply With Quote
Old 06-26-2021, 08:50 PM   #4
Rock Stacker
 
Join Date: Mar 2021
Location: Florida
Posts: 79
Default Re: Reedy or Holmes for my Capra?

Quote:
Originally Posted by HumboldtEF View Post
I dont own a Capra but I do know they're geared a bit higher than most crawlers so that alone is gonna reduce torque and the drag brake strength.

Check out the Revolvers if you want the best torque and drag brake.
They are geared high for sure, I did drop it down to an 11t pinion and that helps a bit. I also do like the revolver and but it's so loud. lol
Blaze0303 is offline   Reply With Quote
Old 06-26-2021, 09:13 PM   #5
I wanna be Dave
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,475
Default Re: Reedy or Holmes for my Capra?

Theres a new ESC that solves the noise issue, though its not what I'd call fully done yet (programming software is still coming).

New Holmes Hobbies ESC spotted: Crawlmaster Mini V1
HumboldtEF is offline   Reply With Quote
Old 06-26-2021, 09:17 PM   #6
Rock Stacker
 
Join Date: Mar 2021
Location: Florida
Posts: 79
Default Re: Reedy or Holmes for my Capra?

Yeah, that whole thing is a mess still...I think he released that too early for sure.
Blaze0303 is offline   Reply With Quote
Old 06-27-2021, 09:29 AM   #7
Rock Crawler
 
Join Date: Nov 2019
Location: Erie
Posts: 546
Default Re: Reedy or Holmes for my Capra?

If the Capra would accept a 550 size brushed motor (in stock form) that would be a great option, but that’s not the case. I run a Holmes V2 2200kv Revolver in mine, paired with a Mamba X esc and 11 tooth pinion and it’s perfect. Noisy, of course, but not as bad as I expected. Surprisingly, my UMG10 running a V2 2500kv Revolver Snubnose/Castle Mamba Micro X Crawler Ed is noticeably louder (higher pitched). Torque, low speed control, and drag brake with these are incredible and will hold the vehicle in place anywhere as long as there’s traction. The Holmes Puller Pro motors, both standard and stubby are beast motors as well. Have those in other rigs.
King Dork is offline   Reply With Quote
Old 06-27-2021, 02:38 PM   #8
Newbie
 
Join Date: Apr 2021
Location: Baltimore
Posts: 49
Default Re: Reedy or Holmes for my Capra?

I had a Capra at one point. There is a reason I know no longer own one. Personally I found the thing to be a pain to deal, it was one issue after another.
That being said, go brushless and bash the crop out of it.

Sent from my SM-N981U using Tapatalk
MrCataract is offline   Reply With Quote
Old 06-27-2021, 10:21 PM   #9
Rock Stacker
 
Join Date: Mar 2021
Location: Florida
Posts: 79
Default Re: Reedy or Holmes for my Capra?

I definitely wish the Capra could use a 550 can but it’s such a hassle. At this point I might just put the same combo I have in my TRX4 because I really like it.

Castle Copperhead and Holmes Puller Pro Stubby

I definitely hear you on it being a bit of a pain with some issues but honestly I’m not really mad at it, my biggest gripe is probably just the gearing.
Blaze0303 is offline   Reply With Quote
Old 06-28-2021, 09:25 AM   #10
Rock Crawler
 
Join Date: Feb 2020
Location: Fort Leonard Wood
Posts: 868
Default Re: Reedy or Holmes for my Capra?

A good brushed motor will perform very well, depending on you application it may be the right answer. The sport you have is an entry level $15-20 motor. Don't judge all brushed motors off that one.

The brushless in theory will last longer and longer battery life. A high ended brushed motor will perform very well for what it is designed for but for the most part a brushless is the easy answer for an RC you want to have more driving options.
MOguy is offline   Reply With Quote
Old 08-14-2021, 04:05 AM   #11
Rock Stacker
 
Join Date: Mar 2021
Location: Florida
Posts: 79
Default Re: Reedy or Holmes for my Capra?

Just an update, I ended up going Holmes Torquemaster expert 30T and it’s been really great so far. Like the name states, its got heaps of Torque. Very satisfied for $50.
Blaze0303 is offline   Reply With Quote
Old 09-16-2021, 11:52 AM   #12
Rock Crawler
 
Join Date: Feb 2020
Location: Fort Leonard Wood
Posts: 868
Default Re: Reedy or Holmes for my Capra?

Quote:
Originally Posted by Blaze0303 View Post
I definitely wish the Capra could use a 550 can but it’s such a hassle. At this point I might just put the same combo I have in my TRX4 because I really like it.

Castle Copperhead and Holmes Puller Pro Stubby

I definitely hear you on it being a bit of a pain with some issues but honestly I’m not really mad at it, my biggest gripe is probably just the gearing.
Are you having issues with your Copperhead?
MOguy is offline   Reply With Quote
Reply



Reedy or Holmes for my Capra? - Similar Threads
Thread Thread Starter Forum Replies Last Post
VFD Capra...Can I Still Call It A Capra? mjensen Axial Capra 107 11-20-2021 03:56 AM
Reedy Combo ?? Pita Electronics 0 02-22-2013 09:28 AM
R.I.P. Mike Reedy Rubbaneck Chit Chat 12 05-17-2011 08:34 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com