|
| LinkBack | Thread Tools | Display Modes |
09-04-2022, 08:21 PM | #1 |
Quarry Creeper Join Date: Nov 2008 Location: grand junction
Posts: 309
| Copperhead vs. Mamba X In a mostly trail Gshot
Long story short, got a Scx10 II with Capra drive train, ordered a G speed G shot kit, ordered a Dlux portal transmission, but will probably run the Capra dig transmission for awhile, also have a built 3 gear. Will be on 1.9 wheels, have the 1 step up from stock overdrive portal gears, running the savox servo I got it with. Probably won't ever see a Comp so not trying to fit into a class, Lots of slick rock and very loose dirt so wanting to stay away from an Outrunner, seen the comments about the Copperhead and like the stouter BEC in the Mamba X 1/10 not micro, weight and clearance not really an issue, and also Looking at the Holmes Puller pro stubby in 2200kv or should I go 2700kv and or full size 540 can, I am throttle happy and like big hills but I'm no rock racer and still want good low speed control, mostly 3s batteries but 4s not off the table, what do you guys think? Sent from my SM-S901U using Tapatalk |
Sponsored Links | |
09-04-2022, 08:28 PM | #2 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,561
| Re: Copperhead vs. Mamba X In a mostly trail Gshot
Tried to pm you, but your inbox is full… Sent from my iPhone using Tapatalk |
09-04-2022, 10:02 PM | #3 |
Quarry Creeper Join Date: Nov 2008 Location: grand junction
Posts: 309
| Re: Copperhead vs. Mamba X In a mostly trail Gshot
Cleared up now, also to note will be running some brass portal covers, know the plastic axle housings can be questionable with power so maybe the 2700kv is a little much? Already have 1 spare housing lol. Sent from my SM-S901U using Tapatalk |
09-05-2022, 07:18 AM | #4 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,561
| Re: Copperhead vs. Mamba X In a mostly trail Gshot Quote:
Personally I prefer the mamba, just because it has the auxiliary wire, a heavy duty bec, and can be had for not much more than the copperhead. Sent from my iPhone using Tapatalk | |
09-05-2022, 09:13 AM | #5 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,010
| Re: Copperhead vs. Mamba X In a mostly trail Gshot
*** IGNORE the statement below: BTW - The Copperhead will NOT let you run 4S - max is 3S... *** I checked again and realized I was looking at the SW4! () Last edited by durok; 09-05-2022 at 10:33 PM. Reason: Checked wrong product specs - error on my part! |
09-05-2022, 11:57 AM | #6 |
RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: Copperhead vs. Mamba X In a mostly trail Gshot Why is that durok? Where did u get the copperhead will NOT run 4s? Just curious. Ive got a copperhead in my c1 n run 4s with no issues. It doesnt run hot, the fan has never came on, the motor doesnt get hot, n i get 2+ hrs run time from a 4s 1400mah 75c batt. The esc is rated 2-4s
|
09-05-2022, 10:31 PM | #7 | |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,010
| Re: Copperhead vs. Mamba X In a mostly trail Gshot Quote:
Good thing you cleared that up, as well - I have a NIB Copperhead that I haven't installed yet and was about to get annoyed that I had missed the limitations! | |
09-06-2022, 04:44 AM | #8 | |
RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: Copperhead vs. Mamba X In a mostly trail Gshot Quote:
Sent from my SM-A516V using Tapatalk | |
09-09-2022, 07:07 AM | #9 |
Quarry Creeper Join Date: May 2019 Location: Knoxville
Posts: 466
| Re: Copperhead vs. Mamba X In a mostly trail Gshot
I run a Dlux Portal trans in my G-Shot, using a HH Crawlmaster mini V2, and have a Mamba X in my 4-10 Ultra and a Copperhead in my 4-10 Phoenix. You can't go wrong with either (though some people have had issues with the Copperhead) someone else noted the beefier BEC in the Mamba X. I run mainly direct power servos so the Copperhead saves you a few dollars...
|
09-18-2022, 03:21 PM | #10 |
Quarry Creeper Join Date: Nov 2008 Location: grand junction
Posts: 309
| Re: Copperhead vs. Mamba X In a mostly trail Gshot
Bought a Castle Mamba X and Slate 2850kv combo, a direct powered servo is on the upgrade list, I'll be soldering in a Jst pig tail so it's ready but have a decent servo for now probably be awhile before I convert it, it's still quite capable as is, I'll post up my opinions some time. Thanks to those who replied. Sent from my SM-S901U using Tapatalk |
Copperhead vs. Mamba X In a mostly trail Gshot - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just a Copperhead JK | 58_Willys | 1.9 Scale Rigs | 6 | 10-27-2018 02:13 PM |
copperhead | cossack | Tamiya TLT Crawlers | 0 | 10-18-2008 02:22 PM |
Copperhead | rckcrawler | Newbie General | 24 | 04-07-2008 07:20 PM |
Copperhead | Kamikaze | Videos! | 10 | 08-09-2006 07:55 PM |
Thread Tools | |
Display Modes | |
| |