|
| LinkBack | Thread Tools | Display Modes |
09-06-2022, 06:18 PM | #1 |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Flysky GT5 Channel 4 winch control
Hello, I have a Flysky GT5 that I am operating a H.O.G winch in my Capra. The winch operates too fast and i would like so slow the speed. I have the winch on channel 4, is there a way to slow the speed of the winch by using the transmitter or do I need to use a slow converter wire harness from Ebay to place between the winch and the receiver? Thanks |
Sponsored Links | |
09-07-2022, 09:59 AM | #2 |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Re: Flysky GT5 Channel 4 winch control
I originally ordered the winch from RC Addicts but i cannot find the winch on their site. Here is the link on Amain. The winch is made by Precision RC Works, in doing a quick search my deduction is they may no longer manufacture it as even AMain is discontinued. https://www.amainhobbies.com/precisi...-0004/p1175141 I had to use this: https://rcaddictparts.com/collection...=8196317216869 https://rcaddictparts.com/products/a...1b5b3899&_ss=r |
09-07-2022, 11:05 AM | #3 |
Rock Crawler Join Date: Jan 2022 Location: st louis
Posts: 574
| Re: Flysky GT5 Channel 4 winch control
Servo winches can't be rate adjusted unless you use a speed control for the winch controller. Can get a cheap micro esc off Amazon. Otherwise only other option is to reduce voltage going to the winch. Sent from my SM-S906U using Tapatalk |
09-07-2022, 02:28 PM | #4 | |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Re: Flysky GT5 Channel 4 winch control Quote:
I ordered one of these off Ebay, so I will give that a try. Thanks for the help!! https://www.ebay.com/itm/38473412677...28b0%7Ciid%3A1 | |
09-07-2022, 02:37 PM | #5 | |
Rock Crawler Join Date: Jan 2022 Location: st louis
Posts: 574
| Re: Flysky GT5 Channel 4 winch control Quote:
Sent from my SM-S906U using Tapatalk | |
09-07-2022, 04:16 PM | #6 | |
Rock Crawler Join Date: Jan 2022 Location: st louis
Posts: 574
| Re: Flysky GT5 Channel 4 winch control Quote:
Servo winches because of the gear reduction can be easily made more powerful than your common scale winch and more durable. Using the servo case makes mounting one much more simple and more options of ways to mount them without custom fabricating. The speed change is easy to do in any decent transmitter. Travel adjustment. Turn that down the esc reads it as low throttle input and the winch moves slow. Set the travel at 100% and esc reads that as 100% throttle. Sent from my SM-S906U using Tapatalk | |
09-07-2022, 05:24 PM | #7 | |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Re: Flysky GT5 Channel 4 winch control Quote:
https://www.amazon.com/Readytosky-Bi...5&sr=8-21&th=1 Is there a better item for the task? | |
09-07-2022, 05:52 PM | #8 |
Rock Crawler Join Date: Jan 2022 Location: st louis
Posts: 574
| Re: Flysky GT5 Channel 4 winch control
Not that specific one and that one is probably more than is needed but ya, smallest brushed esc you can find that will run on 3s. Sent from my SM-S906U using Tapatalk |
09-24-2022, 04:34 PM | #9 |
Rock Crawler Join Date: Jun 2013 Location: Portugal
Posts: 516
| Re: Flysky GT5 Channel 4 winch control
And buying a slower N30 motor?
|
11-14-2022, 10:26 AM | #10 |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Re: Flysky GT5 Channel 4 winch control
After a $10.00 eBay delay wire assembly that didn't work, I ordered this from Yeah Racing. https://www.amainhobbies.com/yeah-ra...-0528/p1358560 The Yeah Racing is very simple after rereading the instructions for the setting I wanted. Also it has less wiring to connect than the Dragon controller. I am still working on slowing down the speed so I can creep it but I believe Yeah Racing works a little slower and I feel I have a little better control of the winch now now as the action is smooth not glitchy with the variable knob control of the Flysky GT5. I will mess with it more as I have time to determine the true effectiveness. I tried this as I gambled it might work but did not. Slowed the winch but was glitchy with the Dragon controller installed. https://www.ebay.com/itm/19461363895...Cclp%3A3650466 |
11-15-2022, 12:00 PM | #11 |
I wanna be Dave Join Date: May 2007 Location: Vancouver, BC
Posts: 2,379
| Re: Flysky GT5 Channel 4 winch control |
12-01-2022, 11:36 AM | #12 |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Re: Flysky GT5 Channel 4 winch control
Lots of information to read. Thank you.
|
12-22-2022, 06:49 PM | #13 |
Pebble Pounder Join Date: Sep 2010 Location: Lava Lands
Posts: 135
| Re: Flysky GT5 Channel 4 winch control
You can just plug it into channel 5 or 6, the knobs on top. the farther you turn the knob the faster it moves, super simple.
|
01-03-2023, 04:19 PM | #14 |
Newbie Join Date: Nov 2016 Location: San Ardo
Posts: 22
| Re: Flysky GT5 Channel 4 winch control |
Flysky GT5 Channel 4 winch control - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New FlySky controller? FlySky FS-GT5 6 Channel Transmitter & FS-Gi6 Receiver Set | soze | Electronics | 221 | 01-16-2024 12:49 PM |
Using an RC4WD winch with FlySky GT5 | DigginForGoold | 1.9 Scale Rigs | 4 | 05-31-2022 11:56 AM |
Flysky GT5 throttle channel issue | halllon | Electronics | 6 | 12-04-2020 01:54 PM |
Cruise control on FlySky GT5? Possible? | KingRaptor | Electronics | 5 | 11-07-2020 11:48 AM |
Winch control w/ Flysky GT3C ? | Statik | Electronics | 14 | 04-14-2013 07:45 PM |
| |