| |
03-06-2005, 10:18 PM
| #1 |
| Newbie Join Date: Jul 2004 Location: Colorado
Posts: 9
|  servo issue
First let me say sorry if this has been gone over before, I'm not handy with computer. Here's my problem... When I'm crawling with my TXT my front servo get's very warm maybe even hot and I figure this can't be good. Any help would be greatly appreciated. Here's my set-up TXT,one stock motor,gd 600,super chicken, front servo Airtronic's 94258 145 oz/in's of torque, rear servo Hitec hs-5645mg 143.03 oz/in's of torque, I almost never use the rear servo. And I use gp 3300's. Is this a power issue, do I need a rec. pack? or is it something else? If I use a rec. pack is an 1150 mah from my nitro car's ok? Thank's for any help chuck |
|  |
| Sponsored Links | |
| | |
|
03-08-2005, 06:35 AM
| #2 |
| Newbie Join Date: Jul 2004 Location: Colorado
Posts: 9
|
Come-on Lady's, One of you guy's/gal's should know/or have a idea what's wrong here. Please,pretty please with rock's on top Thank's chuck |
|
| |
|
03-08-2005, 06:45 AM
| #3 |
| MODERATOR™   Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|
Make sure there's no bind anywhere. I overtightened some screws, and turnbuckles, and there was so much bind. Loosened everything up a quarter turn, and it's a night and day difference.
|
|
| |
 |
| |
Linear Mode
