04-23-2007, 05:24 PM | #1 |
Pebble Pounder Join Date: May 2006 Location: Chico, California
Posts: 194
| cen genisis servo
Has anyone tried these servos for crawlin? they are very inexpensive. they are 144.oz all metal with double bearings. http://cgi.ebay.com/ws/eBayISAPI.dll...ADME:B:EF:US:2 |
Sponsored Links | |
04-24-2007, 05:28 AM | #2 |
Pebble Pounder Join Date: Feb 2006 Location: FRANCE
Posts: 141
|
They semm to have less torque than a MG995 or 945, but mine has survived my X-Factor and my Clod... Should be ok on a TLT based rig I think
|
04-24-2007, 07:04 AM | #3 |
I wanna be Dave Join Date: Oct 2006 Location: Martinsburg WV
Posts: 2,781
|
I've been sniped several times on those. They usually go pretty cheap, but I'm not the type to be there waiting at auction's end. They should be fine for a 2.2, they are from a Genesis monster truck, which ain't small. 945's are more torque (close to 200 oz.) for about the same price. |
04-24-2007, 01:27 PM | #4 |
Quarry Creeper Join Date: Apr 2006 Location: Pittsburgh
Posts: 412
|
I got one cheap on ebay as well. It worked ok in my tlt, but after a few minutes of run time it would overheat and stall . Then suddenly come back to life. Definitely not a esc problem because I'm running a Tekin Rebel 2. I'm running a Blue Bird BMS-630mg and thinking about buying the TP945's.
|
04-26-2007, 11:23 AM | #5 |
I wanna be Dave Join Date: Oct 2006 Location: Martinsburg WV
Posts: 2,781
|
I'm running some 945's now - they are good units for the price...
|
Thread Tools | |
Display Modes | |
| |