Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: dx6 glitching

Reply
 
LinkBack Thread Tools Display Modes
Old 10-03-2007, 06:09 AM   #1
Quarry Creeper
 
Join Date: Jul 2007
Location: south jersey
Posts: 393
Default dx6 glitching

went to a contest on sun and i had a serious glitching problem, i ran there before so i dont think it had anything to do with the area , someone to get a spectrum capacitor to plug in the receiver , does any one know if this will help ? or you have any ideas? thanx
tat2INDY is offline   Reply With Quote
Sponsored Links
Old 10-03-2007, 06:21 AM   #2
666
MODERHATER™
 
666's Avatar
 
Join Date: Nov 2005
Location: Colorado
Posts: 10,939
Default

Are you running high power servos? Chances are your activating the failsafe that shuts it down when the receiver senses a voltage drop. If that is the case you will need to get the servo drain away from the receiver using a receiver pack or a regulator.
666 is offline   Reply With Quote
Old 10-03-2007, 10:55 AM   #3
Quarry Creeper
 
Join Date: Jul 2007
Location: south jersey
Posts: 393
Default

thankx i'll try the receiver pack to see if that helps, the only thing is this time i used a lipo 11.4 volts 2100 and last time i used a 3600 stick pack
tat2INDY is offline   Reply With Quote
Old 10-03-2007, 02:25 PM   #4
RCC Addict
 
Join Date: Mar 2006
Location: Xxx
Posts: 1,118
Default

I would run the volt regulator. Really is a nice addition . After not having and now I do , I see that the servo's really are totally under my control.
PROTOTYPE is offline   Reply With Quote
Old 10-03-2007, 06:31 PM   #5
Quarry Creeper
 
Join Date: Jul 2007
Location: south jersey
Posts: 393
Default

i'm gonna try re binding it and see if that helps
tat2INDY is offline   Reply With Quote
Old 10-03-2007, 07:53 PM   #6
666
MODERHATER™
 
666's Avatar
 
Join Date: Nov 2005
Location: Colorado
Posts: 10,939
Default

Rebinding is not going to do it. Now that you say you used a high voltage pack it tells me that your BEC diminished to nothing and you triggered the Spektrum's failsafe.
666 is offline   Reply With Quote
Old 10-03-2007, 08:22 PM   #7
I wanna be Dave
 
Join Date: Dec 2006
Location: In Cali.
Posts: 4,109
Default

Quote:
Originally Posted by PROTOTYPE View Post
I would run the volt regulator. Really is a nice addition . After not having and now I do , I see that the servo's really are totally under my control.
Ditto on this comment. I love the power the servo's have now!
Racer4Life is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com