dx6 glitching went to a contest on sun and i had a serious glitching problem, i ran there before so i dont think it had anything to do with the area , someone to get a spectrum capacitor to plug in the receiver , does any one know if this will help ? or you have any ideas? thanx |
Are you running high power servos? Chances are your activating the failsafe that shuts it down when the receiver senses a voltage drop. If that is the case you will need to get the servo drain away from the receiver using a receiver pack or a regulator. |
thankx i'll try the receiver pack to see if that helps, the only thing is this time i used a lipo 11.4 volts 2100 and last time i used a 3600 stick pack |
I would run the volt regulator. Really is a nice addition . After not having and now I do , I see that the servo's really are totally under my control. |
i'm gonna try re binding it and see if that helps |
Rebinding is not going to do it. Now that you say you used a high voltage pack it tells me that your BEC diminished to nothing and you triggered the Spektrum's failsafe. |
Quote:
|
All times are GMT -6. The time now is 02:38 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com