Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics


Thread: Definitive Radio, Power Wiring, BEC and Servo Threads-- RCC's Top Tech Threads!

Closed Thread
LinkBack Thread Tools Display Modes
Old 11-08-2007, 07:09 PM   #1
owner, Holmes Hobbies LLC
JohnRobHolmes's Avatar
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default Definitive Radio, Power Wiring, BEC and Servo Threads-- RCC's Top Tech Threads!

If you feel you have a techincal thread that is related to Radios, Power Wiring, or Servos and would benifit from being a sticky then ask a mod to add a link to your thread into this one.

This thread is a great compilation of wiring up your system

Definitive wiring diagrams

Below are links to threads that are very helpfull discussions about specific ECS's that work well in the RC Crawling environment.

How To: Installing an MPI voltage regulator

Lets talk servos and servo power

Hitec Servo Voltage Ratings.......the answers from Hitec

DX7 + Mamba + Castle BEC = trouble

Castle BEC in depth review and testing

Servo Reversing by hardwiring
Step by Step Servo Reversing - RCCrawler.com Bulletin Board

Converting a servo into a winch.

Wiring an external BEC into your rig
Definitive wiring diagrams for BECs Rx Servos Motors etc. - RCCrawler.com Bulletin Board

BEC to Servo connector - RCCrawler.com Bulletin Board

How to use a Castle Link on a Mac

Diagnosing a broken servo
How to diagnose servo failures and (hopefully) repair them. - RCCrawler.com Bulletin Board

Radio Programming and MODs
4pk programming and setup guide

Futaba 3PM programming for rear steer
Futaba 3PM programming for 3 position shifting.

DX3 toggle switch mod

Futaba 3PJ programming for 3 position 3rd channel.

Programming a DX6 for independent throttle control and 4ws
Jay's tech article on programming a DX6 for independent throttle control and 4ws
Programming a DX6 for 3 position dig.

John Hallman's Airtronics M11 settings for "push-button" dig control

My Modded TQ3 Update - Added EPA pots

Last edited by JohnRobHolmes; 11-04-2012 at 06:18 AM.
JohnRobHolmes is offline  
Sponsored Links
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 05:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com