Team Associated teasing a scale crawler!

[RABIDFOX]

Picked my RTR up yesterday. There were three people waiting to see if I was a no show to pick it up.
Big shout out to Paradise Hobby in Fort Myers, Florida for guarding it for me, lolz.

[mikemcE]

Paradise are good people!!
Enjoy!


Hang up and Drive

[rattmobbins]

Originally Posted by rattmobbins

Mine just showed up too!!!

Gonna try swapping the bumpers off an SCX10 Blazer. I think the tube style will look good on this truck. Pics to follow.

Nevermind. Style looks good but the bumper still sticks out WAY too far and isn't quite high enough.

Back to the bumper drawing board.

[Browneye]

Is SSD listening???
Or scaler-fab. Or Wertymade.

[rattmobbins]

Originally Posted by Browneye

Is SSD listening???
Or scaler-fab. Or Wertymade.

Scalerfab has 3 or 4 Sendero bumpers on their website.

[TrailDawg362]

I've got the Wertymade Boar bumper on the front, and a Scalerfab rear coming.

[Browneye]

Originally Posted by rattmobbins

Scalerfab has 3 or 4 Sendero bumpers on their website.

Like.
There's a rear one too...
Thanks!

[SSD]

Originally Posted by BrokeBob

Does anyone know if the axial link mounts for the ar44 fit this axle? They seem to be very similar.
Sent from my iPhone using Tapatalk

They dont fit at all.

Originally Posted by Browneye

Is SSD listening???

SSD AR44 brass knuckles can fit the stock C hubs but a little tight. And you will lose BTA.

So new Enduro brass knuckles, diff cover, link mounts are already in progress. As AR44 C hubs dont actually fit new ones need to be made also. Will start other parts soon also...

[mikemcE]

Originally Posted by SSD

They dont fit at all.




SSD AR44 brass knuckles can fit the stock C hubs but a little tight. And you will lose BTA.

So new Enduro brass knuckles, diff cover, link mounts are already in progress. As AR44 C hubs dont actually fit new ones need to be made also. Will start other parts soon also...

Yup, loud and clear !!!!!



Hang up and Drive

[rattmobbins]

Originally Posted by Browneye

Like.
There's a rear one too...
Thanks!

Yeah I really like those but don’t wanna spend $100 on bumpers if I can avoid it. Still gonna try and get this SCX10 Blazer bumper I snagged for $9 to work.

[rattmobbins]

Anyone else experience severely leaky shocks right out of the box? 3 of my 4 dumped every ounce of oil all over my table while I was working on the bumpers.

Also had one of the rear shocks installed backwards by the factory. Thinking they might be trying to rush these out the door a smidge too quickly.

[HumboldtEF]

I dont know if this warrants its own thread so I'll just put it here.

I ordered up the Stealth X gearbox kit (42034) for another project. I wasn't sure whats included as they dont even have a picture or any information up yet, I figured I'd risk it and find out.

Well it is a complete kit, looks like all of the overdrive gears are provided too, just not the 1:1 gear just like the RTR and Kit.



Instructions look good and easy to follow

[GA Dawg]

Originally Posted by HumboldtEF

Well it is a complete kit, looks like all of the overdrive gears are provided too, just not the 1:1 gear just like the RTR and Kit.

For $50 I had assumed that it was a complete kit. The overdrive gears being included makes this a real winner. The 1:1 gear not being included isn't a big deal since the whole point of this trans is the overdrive. I thought I was done messing with my SCX10ii, but it looks like a new upgrade is on the horizon.

[punkindrublik]

Got my preorder in for my kit. Was told it will ship next week. Yay!

[Old n ratty]

I know its been said that the brass knuckles will fit- albeit you loose the BTA steering, but do the brass chubs fit?
https://www.ebay.co.uk/itm/Samix-RC-...wAAOSw2etbftB9

[olydemon]

Originally Posted by rattmobbins

Anyone else experience severely leaky shocks right out of the box? 3 of my 4 dumped every ounce of oil all over my table while I was working on the bumpers.

Also had one of the rear shocks installed backwards by the factory. Thinking they might be trying to rush these out the door a smidge too quickly.

I also had 3 of 4 leak. I contacted warranty and they sent me some oil and a rebuild kit.



I just discovered last night that one of the rod ends on the servo link was on upside down. There have been some funny posts of things people found installed incorrectly or maybe even not at all.... I would say Friday shift builds, but over there I don't think they get weekends...

[dezfan]

Just got the confirmation that my Enduro Kit will be here Friday!!!

Stoked!!!🤩

[HumboldtEF]

Originally Posted by Old n ratty

I know its been said that the brass knuckles will fit- albeit you loose the BTA steering, but do the brass chubs fit?
https://www.ebay.co.uk/itm/Samix-RC-...wAAOSw2etbftB9

If I were you I'd hold tight, SSD has said they're working on it already.

Originally Posted by SSD

SNIP
SSD AR44 brass knuckles can fit the stock C hubs but a little tight. And you will lose BTA.

So new Enduro brass knuckles, diff cover, link mounts are already in progress. As AR44 C hubs dont actually fit new ones need to be made also. Will start other parts soon also...

[soze]

Yep, I'm holding tight for the SSD Goodies. Swapping out to metal beadlocks and different tires already helps it out quite a bit! The only issue is that I really like the way the stock wheels and tires look. I guess you could always replace the ring from the wheels with a ring from some metal beadlocks to see if that would help.

[mikemcE]

Originally Posted by dezfan

Just got the confirmation that my Enduro Kit will be here Friday!!!



Stoked!!!

Pictures!!!!!!!!

Some will wait a loooooooong weekend for a glorious Monday!


Hang up and Drive