|
| LinkBack | Thread Tools | Display Modes |
07-16-2019, 10:01 PM | #81 |
I wanna be Dave Join Date: Dec 2016 Location: san diego
Posts: 2,723
| Re: What I'm doing to my ENDURO!
Next time use a katana, it will fit better! But seriously thats rad and cant wait to see where this is going! Last edited by Shinchu; 07-17-2019 at 06:54 AM. |
Sponsored Links | |
07-17-2019, 12:05 AM | #82 |
I wanna be Dave Join Date: Aug 2016 Location: Orange County, CA
Posts: 3,643
| Re: What I'm doing to my ENDURO!
With that body cut like that.. you're going to be super light with a lot of body clearance!
|
07-17-2019, 12:10 AM | #83 |
Quarry Creeper Join Date: May 2019 Location: North Highlands
Posts: 483
| Re: What I'm doing to my ENDURO! |
07-18-2019, 12:12 AM | #84 |
Quarry Creeper Join Date: Nov 2016 Location: Switzerland
Posts: 236
| Re: What I'm doing to my ENDURO!
That Jimny Enduro looks promising After a lot of messuring, cutting, fitting, cutting again, thats how it looks now. I am really happy how it turned out. There is still a lot to do, but I like how the cage sits and that I could use the whole bed. Gesendet von meinem TA-1004 mit Tapatalk Last edited by GrimmTheTourist; 07-18-2019 at 12:17 AM. |
10-30-2019, 04:13 AM | #85 | |
Quarry Creeper Join Date: Oct 2017 Location: The Netherlands
Posts: 213
| Re: What I'm doing to my ENDURO! Quote:
| |
10-30-2019, 04:19 AM | #86 |
Quarry Creeper Join Date: Oct 2017 Location: The Netherlands
Posts: 213
| Re: What I'm doing to my ENDURO! |
10-30-2019, 06:05 AM | #87 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,121
| Re: What I'm doing to my ENDURO! |
03-17-2020, 04:54 PM | #88 |
Newbie Join Date: Nov 2011 Location: Imperial
Posts: 35
| Re: What I'm doing to my ENDURO!
Threw on proline xj body Got my ripsaws unmounted from the glue on wheels an onto the Sendero beadlocks. Much better cog now, also did rear shock/link mount mod and rear upper link risers. Besides 11.xx% od that's all I've done to it, and wow it goes almost anywhere!
|
03-18-2020, 09:44 AM | #89 |
RCC Addict Join Date: Mar 2011 Location: easton
Posts: 1,394
| Re: What I'm doing to my ENDURO!
I built it and it’s currently sitting as a slider with ifs, servo and motor. Will be using mock up tires tonight and cutting the body Sent from my iPhone using Tapatalk |
03-18-2020, 10:04 AM | #90 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO! |
03-25-2020, 09:40 PM | #91 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO! Well can’t leave well enough alone. Ordered some rear links from associated and shortened the wheel base to 11.8. After I measured it is actually 11.5. Install the bed on the cab and fits really good. The Tamiya hilux clone body and bed works out ok. I didn’t need to cut the bed to fit the shock towers. Lays perfectly flat I also have the front and rear lights in it. Still using the trailwalker bumper. I’m thinking I like this better than the cage. Be safe everybody Last edited by djr01974; 03-25-2020 at 10:28 PM. |
03-27-2020, 08:18 PM | #92 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO!
Painted up the interior and raised the front ride height a bit. |
03-28-2020, 09:58 AM | #93 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,121
| Re: What I'm doing to my ENDURO! |
03-28-2020, 10:27 PM | #94 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO!
Thanks. I do not have a build thread. But the body mounts are from shrink rc. I’ve attached the link and posted a picture for you. I’m using the hilux body which works out good because the bed isn’t deep like the RC4WD bed which you have to cut to accommodate the shock towers. Hope this helps. https://rover.ebay.com/rover/0/0/0?m...2F402096316071 |
03-28-2020, 10:40 PM | #95 | |
I wanna be Dave Join Date: Aug 2016 Location: Orange County, CA
Posts: 3,643
| Re: What I'm doing to my ENDURO! Quote:
| |
03-29-2020, 11:23 AM | #96 | |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,121
| Re: What I'm doing to my ENDURO! Quote:
The Shrink RC mounts look nice. I'm glad to see that you are still able to use the larger battery tray. | |
03-29-2020, 02:08 PM | #97 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO!
Yeah I have too many full size batteries and did t want to start buying shorty packs. Anything over 5200 mah won’t fit with the interior. I painted up the factory trailwalker wheels and put the little tires on for a bit. Looks ok. |
03-29-2020, 05:49 PM | #98 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO! So because we can’t really go anywhere and practicing social distancing so this virus will hopefully go away I decided to work on the element/ Yota again. So I fount a place to mount the waterproof receiver box so I can put the receiver and my light controller in just in case. I don’t normally run in water but a little piece of mind.i did have to trim the bed. I need some gas cans now. Last edited by djr01974; 03-29-2020 at 05:56 PM. |
04-10-2020, 08:37 PM | #99 |
Quarry Creeper Join Date: Aug 2009 Location: orange county
Posts: 312
| Re: What I'm doing to my ENDURO!
So I picked up an axial blazer bumper , trimmed the bed and than I needed to drill some new holes to suck the bumper in some. Than I pained up my shell from the bruiser and mounted it. Last edited by djr01974; 04-10-2020 at 10:46 PM. |
What I'm doing to my ENDURO! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
kmc enduro? | flat out | Tires and Wheels | 18 | 11-18-2012 10:59 AM |
The 1/8 Wonder Enduro Race | The Cow | Non Crawler RC's | 5 | 09-22-2010 03:47 PM |
2.2 enduro-courser | rmdesignworks | Non Crawler RC's | 6 | 12-04-2009 06:00 PM |
Enduro Cross | twisted | Chit Chat | 7 | 02-05-2008 08:22 PM |
Thread Tools | |
Display Modes | |
| |