RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Element RC 1/10 Enduro Trail Truck Sendero (http://www.rccrawler.com/forum/element-rc-1-10-enduro-trail-truck-sendero/)
-   -   New Associated Enduro Crawler - Free-Mods & Upgrades (http://www.rccrawler.com/forum/element-rc-1-10-enduro-trail-truck-sendero/609860-new-associated-enduro-crawler-free-mods-upgrades.html)

Alvinm 08-08-2019 07:29 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by durok (Post 5952891)
Amazon is carrying a Enduro-specific product that is at once nifty, hilarious, and shudder-inducing...

Hood and side-panel graphic decals in a multitude of patterns - some of which fit each category mentioned above!

https://www.amazon.com/East-Coast-Vi...gateway&sr=8-7

https://images-na.ssl-images-amazon....L._SL1280_.jpg

I came across these decals the other day. Pretty good quality too..

https://lh3.googleusercontent.com/3Q...=w1080-h810-no

txbart 08-08-2019 07:33 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Are those Amazon decals pre-cut?

Alvinm 08-08-2019 09:02 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Yes they are.

B-MOW71 08-08-2019 09:05 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by punkindrublik (Post 5954855)
Done, thanks for the tip, I feel better about maiden #2 now.

Your welcome. Maiden voyage V2.0 should be better!"thumbsup"

JatoTheRipper 08-08-2019 11:35 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Haha! Those Amazon decals are so trashy yet I like them somehow.

GA Dawg 08-08-2019 01:27 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by JatoTheRipper (Post 5955184)
Haha! Those Amazon decals are so trashy yet I like them somehow.

If I had the Sendero body I would definitely rock the American flag decals.

Shinchu 08-08-2019 03:56 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
i still think FreakEskinz is missing out on a golden opportunity here...

B-MOW71 08-08-2019 04:08 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Shinchu (Post 5955255)
i still think FreakEskinz is missing out on a golden opportunity here...



I agree! I wonder how long it will be before we see some from them???


Sent from my iPad using Tapatalk

lilws6 08-18-2019 11:42 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Cesco (Post 5954766)
High Clearance SCX10 Rear Crossmember by Harley Designs

I can confirm that this fits and makes the chassis a lot stiffer at the rear. Recon G6 Belgium tested. Take advantage of this for those with a 3D printer.
https://www.thingiverse.com/thing:2286216

https://cdn.thingiverse.com/assets/6...115630%5B1.jpg

(The fuel tank brace is my own design)



That means my fuel cell receiver box I made will fit. That makes me happy [emoji6] [emoji106]


Sent from my iPhone using Tapatalk

Cesco 08-19-2019 02:54 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Shinchu (Post 5955255)
i still think FreakEskinz is missing out on a golden opportunity here...

I asked them of they will as the Enduro. He wants to but is short in time. He is missing out on several 2018 and 2019 releases. Shame, his quality is good.

Shinchu 08-22-2019 11:33 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
if they are half as good as the weathered proline Toyota skin... wooooWEE!

meanwhile... where are the weighted knuckles and such? i want to keep mine with BTA so it still looks like an enduro, but with some heft down low. and somebody needs to do something about (enduro specific) interior...

soze 08-22-2019 12:56 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
I think SSD said they're coming out with weighted knuckles. I'm waiting for at least 2 sets. One for the RTR and one for the kit.

lilws6 08-22-2019 01:13 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Scx10.2 chubs do fit by the way not sure if this has been mentioned.
https://uploads.tapatalk-cdn.com/201...1628fb3492.jpg


Sent from my iPhone using Tapatalk

Shinchu 08-22-2019 03:32 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
aren't the splines off a bit? i think SSD himself warned about this.

*found it
http://www.rccrawler.com/forum/eleme...ml#post5947973
Quote:

Originally Posted by SSD (Post 5947973)
I have been doing some checking:

- AR44 C hubs are too loose on the Enduro axle case. This is very disappointing!

- AR44 axle link mounts do not fit.

~ AR44 knckles fit (just about) but not BTA steering then.

+ bumpers fit

+ Front axle universal shafts fit


lilws6 08-22-2019 05:18 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Shinchu (Post 5957772)
aren't the splines off a bit? i think SSD himself warned about this.

*found it
http://www.rccrawler.com/forum/eleme...ml#post5947973



These hubs were loose on ar44 axles. So I pinched them a smidge in the vice and tightened them up. They do not wobble on my axles. After I run it I suppose Iíll double check to see if they have moved or loosened up.


Sent from my iPhone using Tapatalk

CODYBOY 08-22-2019 08:22 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by lilws6 (Post 5957799)
These hubs were loose on ar44 axles. So I pinched them a smidge in the vice and tightened them up. They do not wobble on my axles. After I run it I suppose I’ll double check to see if they have moved or loosened up.


Sent from my iPhone using Tapatalk

The Yeah racing brass chubs work fine. "thumbsup"

https://i1264.photobucket.com/albums...1-IMG_1569.jpg


I also clearance the unis for a few more degrees of steering.

https://i1264.photobucket.com/albums...2-IMG_1571.jpg

https://i1264.photobucket.com/albums...3-IMG_1572.jpg

Ernie

heavyD 08-23-2019 04:19 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Hi Cody
How do you clearance the uni's please

Thanks [emoji3]

Sent from my Moto G (4) using Tapatalk

Cesco 08-23-2019 04:56 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by CODYBOY (Post 5957833)
The Yeah racing brass chubs work fine. "thumbsup"

https://i1264.photobucket.com/albums...1-IMG_1569.jpg


I also clearance the unis for a few more degrees of steering.

https://i1264.photobucket.com/albums...2-IMG_1571.jpg

https://i1264.photobucket.com/albums...3-IMG_1572.jpg

Ernie

Good find!

CODYBOY 08-23-2019 10:06 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by heavyD (Post 5957864)
Hi Cody
How do you clearance the uni's please

Thanks [emoji3]

Sent from my Moto G (4) using Tapatalk

I use a Dremel with a small grinding wheel and remove material where the uni is binding, or get a pair of SSD universals that already have the clearance. "thumbsup"

Quote:

Originally Posted by Cesco (Post 5957867)
Good find!

Thank you young man! "thumbsup"
Ernie

heavyD 08-23-2019 10:47 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by CODYBOY (Post 5957901)
I use a Dremel with a small grinding wheel and remove material where the uni is binding, or get a pair of SSD universals that already have the clearance. "thumbsup"


Thank you young man! "thumbsup"
Ernie

Thankyou for your reply. I shall have a go at the grinding and if it goes belly up I'll go for another excellent SSD product [emoji106]

Sent from my Moto G (4) using Tapatalk


All times are GMT -6. The time now is 12:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com