RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Element RC 1/10 Enduro Trail Truck Sendero (http://www.rccrawler.com/forum/element-rc-1-10-enduro-trail-truck-sendero/)
-   -   New Associated Enduro Crawler - Free-Mods & Upgrades (http://www.rccrawler.com/forum/element-rc-1-10-enduro-trail-truck-sendero/609860-new-associated-enduro-crawler-free-mods-upgrades.html)

Topher Builds 10-30-2019 10:29 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
1 Attachment(s)
Samix is dropping a new battery tray and servo mount. Wishing I would have held off on the STRC mount as I really like this similar setup on my 10.2.

May need to switch it up once the servo mount is available

https://www.rcsamix.com/index.php/en...-tray-kit.html

MaX-D 10-30-2019 12:26 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Topher Builds (Post 5973840)
Samix is dropping a new battery tray and servo mount. Wishing I would have held off on the STRC mount as I really like this similar setup on my 10.2.



May need to switch it up once the servo mount is available



https://www.rcsamix.com/index.php/en...-tray-kit.html

How would this benefit the truck more than the stock battery location?

Sent from my LM-G710VM using Tapatalk

Cesco 10-30-2019 01:18 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
After Beeftubes, SSD and Treal, now Club5 Racing is working on a pumpkin cover:

https://scontent-ams4-1.xx.fbcdn.net...c2&oe=5E4E4070

https://scontent-ams4-1.xx.fbcdn.net...02&oe=5E5943E7

Source: https://www.facebook.com/club5racingUSA

Topher Builds 10-30-2019 01:41 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by MaX-D (Post 5973868)
How would this benefit the truck more than the stock battery location?

Sent from my LM-G710VM using Tapatalk

By moving the weight forward and over the front axle it will help on climbs.

Sidehill could be compromised some but TBD.

MaX-D 10-30-2019 06:08 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Topher Builds (Post 5973895)
By moving the weight forward and over the front axle it will help on climbs.



Sidehill could be compromised some but TBD.

This truck becomes more and more interesting as the aftermarket upgrades appear. I'm anxious to see what a 1500 Mah 3s battery would do for the truck in this new battery tray.

Sent from my LM-G710VM using Tapatalk

soze 10-30-2019 06:57 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
club5 racing is also coming out with front shock hoops with a double-shear panhard mount. I'm waiting for him to finalize his changes.

Cesco 10-31-2019 08:50 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by soze (Post 5973956)
club5 racing is also coming out with front shock hoops with a double-shear panhard mount. I'm waiting for him to finalize his changes.

They really adapted this chassis, they have so many upgrades for it.

soze 10-31-2019 10:17 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Cesco (Post 5974056)
They really adapted this chassis, they have so many upgrades for it.

I can't wait to see what he has coming out for the Capra. When I visited he was just getting started on the Capra kit. He's definitely developing for the Enduro though. I see more parts created for the Enduro vs the other trucks he makes parts for.

Cesco 11-01-2019 05:09 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Even further than just Club5 Racing.

The speed with which aftermarket parts for the Enduro are introduced and the amount of vendors that do this. I cannot remember that this happened so quickly with the TRX-4, for example. Very cool to see that all these vendors support Element RC.

punkindrublik 11-01-2019 01:56 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by Cesco (Post 5974234)
Even further than just Club5 Racing.

The speed with which aftermarket parts for the Enduro are introduced and the amount of vendors that do this. I cannot remember that this happened so quickly with the TRX-4, for example. Very cool to see that all these vendors support Element RC.

I think it's happening even faster with the Capra. Lots of stuff out already and tons on the way. But yeah, I'm loving all these parts coming out in spades.

punkindrublik 11-04-2019 03:38 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Can somebody confirm which AE aluminum motor mount fits the stealth tranny? I remember there was some talk about one of them being countersunk on the wrong side. TIA

lilws6 11-04-2019 05:30 AM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by punkindrublik (Post 5974876)
Can somebody confirm which AE aluminum motor mount fits the stealth tranny? I remember there was some talk about one of them being countersunk on the wrong side. TIA



The b5m plates work as well as the old rear motor car plates like the SC10, T4 and B4


Sent from my iPhone using Tapatalk

punkindrublik 11-04-2019 02:29 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by lilws6 (Post 5974886)
The b5m plates work as well as the old rear motor car plates like the SC10, T4 and B4


Sent from my iPhone using Tapatalk

So I should be safe with either of these?

https://www.associatedelectrics.com/...or_plate_blue/

https://www.associatedelectrics.com/..._black_3_gear/

Thanks!

txbart 11-04-2019 05:03 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
If attaching either of those to the enduro trans with the correct countersunk screws, The blue one is good as the orientation of the motor to input shaft has the countersinks on the correct side. The black one just won’t work as intended.
Quote:

Originally Posted by punkindrublik (Post 5975031)
So I should be safe with either of these? They are two entirely different items due to which side the countersinks are on.
https://www.associatedelectrics.com/...or_plate_blue/

https://www.associatedelectrics.com/..._black_3_gear/

Thanks!


punkindrublik 11-04-2019 05:30 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by punkindrublik (Post 5974876)
Can somebody confirm which AE aluminum motor mount fits the stealth tranny? I remember there was some talk about one of them being countersunk on the wrong side. TIA

Quote:

Originally Posted by txbart (Post 5975067)
If attaching either of those to the enduro trans with the correct countersunk screws, The blue one is good as the orientation of the motor to input shaft has the countersinks on the correct side. The black one just won’t work as intended.

EXACTLY why I was askin. Thanks so much!! "thumbsup"

soze 11-04-2019 05:45 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by punkindrublik (Post 5975031)

Quote:

Originally Posted by punkindrublik (Post 5975073)
EXACTLY why I was askin. Thanks so much!! "thumbsup"

Element's Instagram story showed the blue one, and said it was on sale.

punkindrublik 11-04-2019 09:24 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by soze (Post 5975077)
Element's Instagram story showed the blue one, and said it was on sale.

And free shipping to boot...

https://www.amazon.com/gp/product/B00L895GYM

Cesco 11-06-2019 02:03 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Now available on Shapeways by Cesco RC, roll bars for the Sendero body.

CRC1022 Element RC Enduro Sendero Twin Roll Bar v1
https://www.shapeways.com/product/7U...onId=131902733

https://images2.sw-cdn.net/product/p...1573479516.jpg


CRC1023 Element RC Enduro Sendero Twin Roll Bar v2
https://www.shapeways.com/product/LC...onId=130712374

https://images1.sw-cdn.net/product/p...1572904932.jpg

V1 is version with light pod mounting points, V2 is version without them. Thirth single roll bar design is in the making.


The roll bar has a number of functions. Scale looks, rollover protection, and better connection between the cab and bed of the body.
The V1 also offers the option of adding Axial or Injora or simulair style lights.

antigacho 11-06-2019 05:35 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
I wonder if the Treal Brass C-Hub Carrier for Element Enduro 1:10 RC
could be compatible with SSD RC Element Enduro Brass Knuckles?

https://i.postimg.cc/43rJhM8q/Sin-t-tulo.jpg

punkindrublik 11-06-2019 07:52 PM

Re: New Associated Enduro Crawler - Free-Mods & Upgrades
 
Quote:

Originally Posted by antigacho (Post 5975581)
I wonder if the Treal Brass C-Hub Carrier for Element Enduro 1:10 RC
could be compatible with SSD RC Element Enduro Brass Knuckles?

I would hope so, they're all using high quality calipers. I'm going to be ordering some to find out since nobody else seems to be bothering with Chubs.


All times are GMT -6. The time now is 05:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com