Soze adds an Enduro Sendero RTR to the fleet.

[soze]

I don't RTR often, but the Enduro looked like one that was worth RTR'ing. I plan on getting the kit as well, but this will be my RTR progress for the Enduro.

Follow my Enduro RTR on YouTube

Kit/RTR:

Element RC Enduro Sendero RTR


Parts:

SSD RC 25T Clamping Metal Servo Horn (eBay)
Pro-Line BF Goodrich Krawler TA KX Tires
Pro-Line 1.9" Dual Stage Foam
1.9 Beadlock wheels
GMADE BOM Rear Cage Kit
GMADE BOM 324mm Rear Links
Boom Racing Shock Keys
Axial WB8 Driveshafts
Element Enduro Yellow Springs
SSD RC Enduro Brass Knuckles SSD00357
SSD RC Enduro Rear Axle Weight SSD00354


Electronics:

Hobbywing WP-1080 Brushed Crawler Esc (ebay)
FlySky FS-R6B 6ch Receiver
FlySky GT3C Transmitter
DS3218 20kg Servo (ebay)
HobbyStar 3700mAh 3S

Tools:

Versachem Brake Caliper Grease
Noleen SF3 Grease (available on eBay)
Permatex Anti Seize Lubricant (ebay)
Associated 1656 FT 1/4 in Driver Handle
Tamiya Side Cutter
DEWALT DCF610S2R 12V MAX Cordless Lithium-Ion 1/4 in. Hex Chuck Screwdriver Kit
MIP Metric Speed Tip Set MIP9512
Bob Smith Industries Blue Thread Locker
ProTek RC Shock Pliers (available on eBay)
Duratrax Shock stand
Multistar Rubber R/C Work mat

[soze]

A look at a brand new fresh RTR

https://youtu.be/Io3CWi9AYJw
































Here's the one bummer out of the box. The manual and decal sheet weren't packed well... and...

[Brake Weight]

Subbed.

[B-MOW71]

Will be following along!

Subscribed!

[Shinchu]

looking forward to this... hope to see some rear cage work soon!

[soze]

Steering angle is great out of the box






Swapped over to a Hobbywing 1080 Esc and FlySky GT3C Radio. Running a HobbyStar 3700mah 3S battery.




Here's the stock ESC with the integrated plugs for the LED lights!

[soze]

First night out with the truck to meet the Element RC team at CDM Rocks.

https://youtu.be/NQWq0LH6I-c

[soze]

This was a crawl session I had last Friday when I took my floating holiday.

https://youtu.be/G51bCdsJewk

[bikepilot]

I too will be following this!!!

[fxman]

Following - and still searching for the LIKE button.

[soze]

So after noticing some shaft play in the stock servo, I decided to swap out to the DS3218 20kg servo along with a SSD RC 25T clamping metal servo horn. I'll eventually get a stronger servo, but the 20kg will do for now.






The stock Enduro bumper is huge one the Enduro. The stock bumper on a SCX10.2 Cherokee is pretty big as well on a SCX10.2.
Stock JCR Offroad bumper from the SCX10.2 Cherokee kit is much smaller when mounted on the Enduro, than the stock Enduro bumper. I'll stick with this for a while until the bumper I want eventually shows up for sale.

[soze]

https://youtu.be/ONyEJ3YkSB8



Time for the 11.83% overdrive gears (26T/54T) to go in. Stock is 5.7% (27T/53T) overdrive.

11.83% Gear set. 26T/54T gears.




You'll first need to disconnect the driveshafts from the transmission.

Next, you'll need to remove the screws from the skidplate. Pay Attention! The skid uses 4 screws. 2 long ones, and 2 short ones. The longer ones are used towards the middle of the skid plate. The shorter ones closer to the frame rails. When you put it back, make sure you put it back properly or else you'll be gouging your gears.




Transmission is out of the truck




A look at the tiny skid




5 screws to remove to get to the gears.




The gears as they are inside. You'll be replacing the 2 gears closest to the spur gear. Leave the 3 gear row alone!




11.83% 26T small gear vs 5.7% 27T small gear




5.7% 53T big gear vs 11.83% 54T big gear




54T gear greased up and put back in




26T greased up and ready to go




All the gears put back. (In hindsight, maybe I should've wiped off the old grease and re-greased all the gears)




Transmission buttoned up and ready to go!




Make sure your driveshafts are in phase when you put them back.






11.83% Overdrive ready!

[OSRC]

Nice write up as always Soze. Very tempted to add one to my collection, seems like a very nice truck!

[Browneye]

Good content for the 'upgrade' thread. Oh well.

[B-MOW71]

Great info here Soze!

I plan to pick my RTR up tonight after work from my LHS and I plan on doing the overdrive first thing so this info will help.

Thanks Soze!

[bikepilot]

Great info!!! you'll have ta let us know if there is a noticeable difference between the two!! at least I wanta know!! All this great info around here on the truck I might just have to pick one up!!! been lookin for a 1.9 anyway.

[soze]

Originally Posted by Browneye

Good content for the 'upgrade' thread. Oh well.

I can put it in there as well? Thought you might have wanted to keep it limited to free upgrades that are "MacGyver" in nature.

[Shinchu]

if this is how its gonna be, i'll just beat soze to the cage stuff lol
come on guys lets just enjoy the truck and not worry about who posts what?

B-mow im picking mine up from my LHS after work today too! and a "build thread" or "RTR improvement program" soon after ;)

[Browneye]

Originally Posted by soze

I can put it in there as well? Thought you might have wanted to keep it limited to free upgrades that are "MacGyver" in nature.

You have good upgrade info so yeah, it would be great to compile it. I'll just link back to threads cuz peeps seem to want their own thread, I get it. I'll start a list once the threads get spread out in the section, add yours and others, whomever gets some good content going for all modifications and upgrades. Every once in awhile stuff shows up on FB too, at least pictures and comments - can capture those too.

Thanks!

PS - We're hitting CDM Friday, 9-noon or so, beat the crowds. My floating holiday.

[Topher Builds]

Good thread, good truck.

Nice work as usual Soze! I appreciate the good info on the OD install.