Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Element RC 1/10 Enduro Trail Truck Sendero
Loading

Notices

Thread: Enduro - Aftermarket Bodies

Reply
 
LinkBack Thread Tools Display Modes
Old 08-22-2019, 01:56 AM   #81
Newbie
 
Join Date: Aug 2019
Location: Moultonborough
Posts: 22
Default Re: Enduro - Aftermarket Bodies

Anyone know if the Proline Toyota 1985 Hilux body fits okay? It says It's a 12.3" wheelbase but i'd like to make sure before ordering one.
https://www.prolineracing.com/bodies...dy-cab-bed.asp

I saw a proline toyota body in a previous post in this thread, but it says (honcho) after the body name and I wasn't sure if it was the same one as the hilux.
SledgehogRC is offline   Reply With Quote
Sponsored Links
Old 08-22-2019, 02:30 AM   #82
Quarry Creeper
 
Join Date: May 2019
Location: North Highlands
Posts: 374
Default Re: Enduro - Aftermarket Bodies

Quote:
Originally Posted by SledgehogRC View Post
Anyone know if the Proline Toyota 1985 Hilux body fits okay? It says It's a 12.3" wheelbase but i'd like to make sure before ordering one.
https://www.prolineracing.com/bodies...dy-cab-bed.asp

I saw a proline toyota body in a previous post in this thread, but it says (honcho) after the body name and I wasn't sure if it was the same one as the hilux.
It was mine, it's the same one

Btw, I've gone full honcho since then...

punkindrublik is online now   Reply With Quote
Old 08-22-2019, 03:27 AM   #83
Newbie
 
Join Date: Aug 2019
Location: Moultonborough
Posts: 22
Default Re: Enduro - Aftermarket Bodies

Quote:
Originally Posted by punkindrublik View Post
It was mine, it's the same one

Btw, I've gone full honcho since then...
Thanks
SledgehogRC is offline   Reply With Quote
Old 08-25-2019, 07:19 PM   #84
Rock Stacker
 
Join Date: Apr 2019
Location: Reno, NV
Posts: 53
Default Re: Enduro - Aftermarket Bodies

After playing around with the Proline Chevy K10 body on my Enduro Kit for the past month, I fitted an Axial Wraith body to gain better approach and departure angles. Also, now have an excellent front bumper from Scalerfab that further helps with the approach angle.

Considering that the Enduro Receiver Box is so ridiculously oversized, has anyone found a smaller substitute?
Still Bill is offline   Reply With Quote
Old 08-29-2019, 10:11 AM   #85
I wanna be Dave
 
Join Date: Dec 2016
Location: san diego
Posts: 2,466
Default Re: Enduro - Aftermarket Bodies

people have used axial and traxxas boxes.
any waterproof container would work.

does pelican make a business card case? lol

actually... ?
https://www.google.com/search?q=wate...w=1920&bih=957
Shinchu is offline   Reply With Quote
Old 08-29-2019, 10:29 AM   #86
I wanna be Dave
 
Join Date: Dec 2016
Location: san diego
Posts: 2,466
Default Re: Enduro - Aftermarket Bodies

Quote:
Originally Posted by new2rocks View Post
Like Shinchu, I went with the Vaterra 1968 F100 truggy and the 11.8" wheelbase, but I wanted a lower stance, which meant shorter tires (1.9 Braven Berserkers) and some trimming. I also made a rear hinge mount for the cage. Here's how it looked after painting but before detailing:
Attachment 383016

Attachment 383017

Attachment 383018

I'm happy with the stance and the overall look. Okay with but not crazy about the truck as a whole, but that's another story.
Shinchu approves of this
any pointers on that cage hinge? i still might toss the proline 79 ferd with ascender cage on there. eventually.
yours looks great!
Shinchu is offline   Reply With Quote
Old 08-29-2019, 06:25 PM   #87
Rock Crawler
 
Join Date: Mar 2013
Location: Waukesha
Posts: 595
Default Re: Enduro - Aftermarket Bodies

Iím doing the axial c10 on mine right now. Just got the k5 grill today before I left on vacation. So I know what Iím doing when I get back.




Sent from my iPhone using Tapatalk
lilws6 is offline   Reply With Quote
Old 08-29-2019, 06:53 PM   #88
XXXXXXXXXXXXX
 
durok's Avatar
 
Join Date: Jun 2016
Location: Austin
Posts: 4,253
Default Re: Enduro - Aftermarket Bodies

^^^ We are anxiously awaiting the full-color reveal of that thing, my man...
durok is offline   Reply With Quote
Old 08-30-2019, 09:15 AM   #89
XXXXXXXXXXXXX
 
durok's Avatar
 
Join Date: Jun 2016
Location: Austin
Posts: 4,253
Default Re: Enduro - Aftermarket Bodies

I keep trying to find new ideas for a new body option, here's one coming from Carisma - 313mm Subaru Brat from their new SCA-1E model - killer fender flares!:



durok is offline   Reply With Quote
Old 08-30-2019, 09:36 AM   #90
Rock Crawler
 
Join Date: Mar 2013
Location: Waukesha
Posts: 595
Default Re: Enduro - Aftermarket Bodies

Quote:
Originally Posted by durok View Post
I keep trying to find new ideas for a new body option, here's one coming from Carisma - 313mm Subaru Brat from their new SCA-1E model - killer fender flares!:









Thatís kinda cool.


Sent from my iPhone using Tapatalk
lilws6 is offline   Reply With Quote
Old 08-30-2019, 09:45 AM   #91
XXXXXXXXXXXXX
 
durok's Avatar
 
Join Date: Jun 2016
Location: Austin
Posts: 4,253
Default Re: Enduro - Aftermarket Bodies

It'll look huge (scale-wise) compared with everything else out there, but that kinda makes it all the more entertaining - Get outta the way of the GIANT Subaru Brat!
durok is offline   Reply With Quote
Old 08-30-2019, 10:17 AM   #92
RCC Addict
 
Join Date: Aug 2017
Location: Readsboro, VT
Posts: 1,549
Default Re: Enduro - Aftermarket Bodies

I don't even have an Enduro kit yet (soon... soon.), but I've got a few of the Proline Jeep Wrangler Unlimited bodies that I grabbed from HK when they were blowing them out for a couple bucks each. Since my wife has a 2015 Wrangler Unlimited, it seems like the perfect body for the kit.
Jim85IROC is offline   Reply With Quote
Old 09-12-2019, 04:42 AM   #93
Pebble Pounder
 
Join Date: Oct 2017
Location: The Netherlands
Posts: 123
Default Re: Enduro - Aftermarket Bodies

Quote:
Originally Posted by TrailDawg362 View Post
I may be the oddball here, but I actually like the short stocky Endero Sendero lid. I did buy a new clear one to paint up, but knows when I'll get around to it.
You are not alone . I like it too.
Cesco is offline   Reply With Quote
Old 09-14-2019, 07:16 PM   #94
Ground Pounder
 
Join Date: Aug 2019
Location: Redlands, CA
Posts: 75
Default Re: Enduro - Aftermarket Bodies

I donít know/think this should happen, but hereís a freshly painted J-Concepts Bajr (for a Slash) sitting atop a Sendero. I think theyíre like $30ish and can be seriously beaten onó-perhaps if you had some under ten year olds around, like these feral nephews of mine that had no idea how bad they were abusing a pretty little Bronco here last week, lol


Sent from my iPad using Tapatalk
LincolnofDeath is offline   Reply With Quote
Old 09-25-2019, 01:22 AM   #95
Newbie
 
Join Date: Aug 2019
Location: SoCal
Posts: 44
Default Re: Enduro - Aftermarket Bodies

I went 4runner and it went better than anticipated although I cut the rear bumper to fit a bumper I didnt end up using but its all good


LetsBash is offline   Reply With Quote
Old 09-25-2019, 08:47 AM   #96
Rock Stacker
 
Join Date: Feb 2018
Location: United States
Posts: 80
Default Re: Enduro - Aftermarket Bodies




Sent from my iPhone using Tapatalk
BrokeBob is offline   Reply With Quote
Old 09-28-2019, 06:33 PM   #97
Newbie
 
Join Date: Jan 2005
Location: North Central Wa.
Posts: 34
Default Re: Enduro - Aftermarket Bodies

My now finished ratty natty stepside.

https://img.photobucket.com/albums/v...w.jpg~original
https://img.photobucket.com/albums/v...h.jpg~original

https://img.photobucket.com/albums/v...q.jpg~original

Last edited by Maxxamillion; 10-03-2019 at 09:10 AM.
Maxxamillion is offline   Reply With Quote
Old 10-04-2019, 09:45 PM   #98
Ground Pounder
 
Join Date: Aug 2019
Location: Redlands, CA
Posts: 75
Default Re: Enduro - Aftermarket Bodies

I think I picked up the one for a Stampede by mistake, but still 12.3. Iím super new to all thisó-waiting on a reamer to batten things down. The idea is to gift it to my friendís dad/adopted uncle, who used to take us three boys out in the desert around Needles when we were kids in his Ď72 F-150 Custom. Heís such a cool guy and had the truck we all wanted growing up, back when you were lucky if you even knew someone with a 4wd, lol. I got pretty close with the green. Looked at the color matches for 1972 truck and man, they had great color choices in the seventies!


Sent from my iPad using Tapatalk
LincolnofDeath is offline   Reply With Quote
Old 10-04-2019, 09:51 PM   #99
Ground Pounder
 
Join Date: Aug 2019
Location: Redlands, CA
Posts: 75
Default Re: Enduro - Aftermarket Bodies

A little better detail of the body here.


Sent from my iPad using Tapatalk[/QUOTE]






Sent from my iPad using Tapatalk
LincolnofDeath is offline   Reply With Quote
Old 10-05-2019, 12:47 AM   #100
RCC Addict
 
Join Date: Jan 2012
Location: Clackamas
Posts: 1,885
Default Re: Enduro - Aftermarket Bodies

Quote:
Originally Posted by LincolnofDeath View Post
I think I picked up the one for a Stampede by mistake, but still 12.3. Iím super new to all thisó-waiting on a reamer to batten things down. The idea is to gift it to my friendís dad/adopted uncle, who used to take us three boys out in the desert around Needles when we were kids in his Ď72 F-150 Custom. Heís such a cool guy and had the truck we all wanted growing up, back when you were lucky if you even knew someone with a 4wd, lol. I got pretty close with the green. Looked at the color matches for 1972 truck and man, they had great color choices in the seventies!


Sent from my iPad using Tapatalk
That body for a stampede has a 10.8 wheel base. The crawler ambush body is 12.3 wheel base.
hillbillyrc is online now   Reply With Quote
Reply



Enduro - Aftermarket Bodies - Similar Threads
Thread Thread Starter Forum Replies Last Post
Gen 8 aftermarket bodies? 4Aces Redcat Crawlers 16 08-05-2019 06:44 PM
Aftermarket bodies / Upgrades. Pythonmsh HPI Venture 0 11-15-2018 03:27 PM
Aftermarket Axial bodies? Canadian GP Axial AX-10 Scorpion 3 03-17-2009 07:43 PM
Best fit aftermarket bodies? Damage General Crawlers 10 04-28-2006 05:22 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com