07-29-2019, 01:09 AM | #1 |
Newbie Join Date: Jul 2019 Location: Renton
Posts: 4
| First kit ever.
I bought my first kit last week after having an SCX10 for a few months and have had a lot of fun building it. Thought I would share its progress and my way of doing things (most of which are probably questionable).
|
Sponsored Links | |
07-29-2019, 01:21 AM | #2 |
Newbie Join Date: Jul 2019 Location: Renton
Posts: 4
| Re: First kit ever.
Mass photo drop. I decided to give welding a go and welded up some new sliders for as much weight at the lowest point I could get it. As bumpers are limited right now I chose to pick up an aluminum bumper mount set for an SCX10 and hit them on the bench grinder, the screw hole offset is different so I will be running 2 (instead of 4) bolts for now. Power options are torque master 35t and 1080 with a power eco servo (trying it out, not too sure it is going to be very good). I blew up my front pinion by forgetting to put washers in the 15mm axle extenders so don't do that. Next to come is wiring. Sent from my SM-N960U using Tapatalk |
07-29-2019, 06:14 AM | #3 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: First kit ever.
Congrats on buying your first kit! The Enduro is a great kit and I'm sure you will enjoy it! |
07-29-2019, 08:20 AM | #4 |
Rock Stacker Join Date: Feb 2018 Location: Pan Handle
Posts: 56
| Re: First kit ever.
digin those sliders!
|
07-29-2019, 12:35 PM | #5 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: First kit ever.
Great choice and build. Do not worry about that servo, i’ve run it on my scx10ii for 8 months now, good value wp servo Hang up and Drive |
07-29-2019, 10:23 PM | #6 |
Newbie Join Date: Jul 2019 Location: Renton
Posts: 4
| Re: First kit ever.
Still waiting on the new pinion to arrive so have been busy make her pretty. Decided to nylon braid everything to make it cleaner. Progress so far. Sent from my SM-N960U using Tapatalk |
07-30-2019, 12:40 AM | #7 |
Newbie Join Date: Jul 2019 Location: Renton
Posts: 4
| Re: First kit ever.
Finished the front bumper wiring Sent from my SM-N960U using Tapatalk |
10-30-2019, 05:10 AM | #8 |
Quarry Creeper Join Date: Oct 2017 Location: The Netherlands
Posts: 213
| Re: First kit ever.
Any updates on this build?
|
| |