|
| LinkBack | Thread Tools | Display Modes |
08-07-2019, 10:53 PM | #1 |
Newbie Join Date: Mar 2019 Location: Seattle
Posts: 28
| Wheel hex offset for the Enduro
I bought some Chinese knock off bead lock rims off Amazon. After assembling the wheel, the inside of the front rims hit the steering horn. Can anyone recommend a wheel hex that would allow me those use these tires. It seems most aftermarket versions say they fit Axial but is this a direct fit without having to modify or drill out. This is my first crawler so l am not familiar with the axle of an Axial crawler. I think 8 mm would clear the rim. I would be grateful for any input.
|
Sponsored Links | |
08-07-2019, 11:06 PM | #2 | |
Quarry Creeper Join Date: May 2019 Location: North Highlands
Posts: 483
| Re: Wheel hex offset for the Enduro Quote:
https://www.associatedelectrics.com/..._hexes_8_5_mm/ | |
08-08-2019, 06:24 AM | #3 |
Newbie Join Date: Jun 2019 Location: Rindge
Posts: 13
| Re: Wheel hex offset for the Enduro
I've got 9mm wide on mine from Amazon, I needed 9 for the wheel rings to clear on back. I had to drill the 5mm dia a bit deeper for them to seat on the pins correctly. I've seen brass 8mm on Ebay, search Enduro Brass Hex. If you have these wheels 8mm probably won't be enough... Last edited by Teamwild; 08-08-2019 at 06:29 AM. |
08-08-2019, 10:00 AM | #4 |
Pebble Pounder Join Date: Feb 2013 Location: Fountain Hills Arizona
Posts: 106
| Re: Wheel hex offset for the Enduro
Check out LockedupRC they have axle flanges in different sizes for your situation. I have the ones that look like a disc brake rotor, very cool. Lots of hardware too.
|
08-09-2019, 08:22 PM | #5 |
Quarry Creeper Join Date: May 2019 Location: Knoxville
Posts: 466
| Re: Wheel hex offset for the Enduro
I used a set of 7mm hex's for my Amazon beadlocks. I did grind the steering arms for a little extra clearance.
|
08-10-2019, 11:06 AM | #6 |
Newbie Join Date: Mar 2019 Location: Seattle
Posts: 28
| Re: Wheel hex offset for the Enduro
Thanks for the advice. I looked at the FT link and that wheel hex was 8.5. I figure a .5 washer and That would give me 9mm but the Associated website is not taking orders because they are in the midst of moving. So, I ordered a 9mm wheel hex on Amazon and will drill out if I need to.
|
08-12-2019, 02:07 PM | #7 |
Pebble Pounder Join Date: May 2007 Location: Victorville
Posts: 176
| Re: Wheel hex offset for the Enduro
If you dont mind plastic the CR12 Hexs work and they are alot wider
|
Wheel hex offset for the Enduro - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
looking for a 3.2" wheel with a 12mm hex and wide offset | engineerjoe | Tires and Wheels | 2 | 05-22-2009 07:37 AM |
help me find wheel 2.2 17mm hex 1/2 offset | buju | Tires and Wheels | 6 | 10-09-2008 02:20 PM |
Thread Tools | |
Display Modes | |
| |