Enduro Lowered Battery tray STL file available on Thingiverse UPDATE: 5/8/20 I added a second version that works with the IFS conversion. I just posted up the STL files for the lowered battery tray I designed, free to download. Its the shorty version, I asked if folks wanted the long version too but didn't hear a peep. https://www.thingiverse.com/thing:3859065 Copied from my build thread: Quote:
|
Re: Enduro Lowered Battery tray STL file available on Thingiverse Nice. Was thinking of doing something similar, this will save me a lot of effort, thanks. Sent from my SM-G970U using Tapatalk |
Re: Enduro Lowered Battery tray STL file available on Thingiverse Nice work man! Sent from my LG-H931 using Tapatalk |
Re: Enduro Lowered Battery tray STL file available on Thingiverse Awesome work as usual man! Sent from my iPhone using Tapatalk |
Re: Enduro Lowered Battery tray STL file available on Thingiverse Great job on the battery tray!"thumbsup" Thanks for making these available.;-) |
Re: Enduro Lowered Battery tray STL file available on Thingiverse My pleasure guys. I didn't see anyone else hack up the stock tray like I did originally so I figured this would make it much more accessible and acceptable. I should also note that these wont work with the inner fenders. Though maybe it could be modified to, I think maybe if the ends had just the bottom portions removed while leaving just a bit (to keep the battery from sliding out) it may just clear. I just dont have a stock setup to test with anymore, my slider/trays are angled upwards a fair bit. I also have a feeling even if I did that the battery itself might interfere. Oh and dont forget to flip the crossmember that the tray mounts to when you mount the new tray |
Re: Enduro Lowered Battery tray STL file available on Thingiverse Nice work man! |
Re: Enduro Lowered Battery tray STL file available on Thingiverse I just picked up an IFS kit and found this design needed a little tweaking to make work. First I modified the old version and then I modeled the modifications. I basically had to remove the slot for the battery strap and put a notch in the tray to clear the servo. even with the notch in the tray the battery hasn't lost any space, shown with a hardpack battery. https://i.imgur.com/UWby2vol.jpg https://i.imgur.com/wBw9M1Cl.jpg https://i.imgur.com/KXx72IOl.jpg the link is the same just print the file called IFS compatible https://www.thingiverse.com/thing:3859065 Oh and I added another version that removes the shelf for the BEC this is the "Battery tray 2" STL |
Re: Enduro Lowered Battery tray STL file available on Thingiverse I just spotted a user on here who's selling a few of these battery trays and I just want to remind folks that I have not given commercial rights to these designs. I've done the work to design these and I want them to get into folks hands so I've shared the design for free so folks can print their own. What I dont want is folks selling and profiting off my designs, sell it at cost if you must but dont profit. |
Re: Enduro Lowered Battery tray STL file available on Thingiverse Quote:
Sent from my SM-G970U using Tapatalk |
Re: Enduro Lowered Battery tray STL file available on Thingiverse Quote:
|
Re: Enduro Lowered Battery tray STL file available on Thingiverse Quote:
I contacted him and he said he'll remove the for sale post. |
All times are GMT -6. The time now is 01:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com