Enduro Lowered Battery tray STL file available on Thingiverse

[HumboldtEF]

UPDATE: 5/8/20 I added a second version that works with the IFS conversion.


I just posted up the STL files for the lowered battery tray I designed, free to download. Its the shorty version, I asked if folks wanted the long version too but didn't hear a peep.



https://www.thingiverse.com/thing:3859065


Copied from my build thread:

Originally Posted by HumboldtEF

The battery tray finished printing this morning. I wonder what folks might want different?

Maybe a long version too for those running larger packs.
Let me know if you guys have any input.

You can see the triangular channel for passing wires over to the other side (which has a lid that screws on) and below it a shelf for a BEC (CC 10 amp version)
I also put a few holes near the ends of the tray that you could zip tie things to.




It came out good except the lid I made for the wire channel was too thin, tried to make it light but it needs more structure to it.



15 minutes later and I had a thicker lid with 1 extra millimeter of headroom.



Its a little bit tidier now

Build thread: Enduro Kit, Jim

[JSterrett]

Nice. Was thinking of doing something similar, this will save me a lot of effort, thanks.

Sent from my SM-G970U using Tapatalk

[soze]

Nice work man!

Sent from my LG-H931 using Tapatalk

[lilws6]

Awesome work as usual man!


Sent from my iPhone using Tapatalk

[B-MOW71]

Great job on the battery tray!

Thanks for making these available.

[HumboldtEF]

My pleasure guys. I didn't see anyone else hack up the stock tray like I did originally so I figured this would make it much more accessible and acceptable.

I should also note that these wont work with the inner fenders. Though maybe it could be modified to, I think maybe if the ends had just the bottom portions removed while leaving just a bit (to keep the battery from sliding out) it may just clear. I just dont have a stock setup to test with anymore, my slider/trays are angled upwards a fair bit. I also have a feeling even if I did that the battery itself might interfere.

Oh and dont forget to flip the crossmember that the tray mounts to when you mount the new tray

[braytonia]

Nice work man!

[HumboldtEF]

I just picked up an IFS kit and found this design needed a little tweaking to make work. First I modified the old version and then I modeled the modifications. I basically had to remove the slot for the battery strap and put a notch in the tray to clear the servo.

even with the notch in the tray the battery hasn't lost any space, shown with a hardpack battery.







the link is the same just print the file called IFS compatible

https://www.thingiverse.com/thing:3859065

Oh and I added another version that removes the shelf for the BEC this is the "Battery tray 2" STL