RCCrawler Forums
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Element RC 1/10 Enduro Trail Truck Sendero (http://www.rccrawler.com/forum/element-rc-1-10-enduro-trail-truck-sendero/)
-   -   New SSD Enduro Parts (http://www.rccrawler.com/forum/element-rc-1-10-enduro-trail-truck-sendero/612309-new-ssd-enduro-parts.html)

SSD 10-09-2019 02:44 PM
New SSD Enduro Parts
 
Brass Knuckles:

http://ssd-rc.com/images/enduro%20br...les%20main.jpg

Upgraded to 11mm bearings:

http://ssd-rc.com/images/enduro%20br...uckles%204.jpg

Heavy Brass Knuckles for Enduro


Brass rear axle weights:

http://ssd-rc.com/images/enduro%20re...hts%20main.jpg

http://ssd-rc.com/images/enduro%20re...eights%203.jpg

Brass Rear Axle Weights for Enduro


Brass link mounts:

http://ssd-rc.com/images/enduro%20br...nts%20main.jpg

Brass Link Mounts for Enduro


Aluminum link mounts:

http://ssd-rc.com/images/enduro%20al...nts%20main.jpg

ALUMINUM LINK MOUNTS FOR ENDURO (BLACK)


HD Diff Covers

http://ssd-rc.com/images/enduro%20al...ver%20main.jpg

HD Aluminum Diff Cover for Enduro (Silver)

http://ssd-rc.com/images/enduro%20al...0black%202.jpg

HD Aluminum Diff Cover for Enduro (Black)


Also a lot of existing bumpers fit the Enduro chassis. Our brass hubs and rotor hubs fit the Enduro wheels: PARTS FOR ENDURO

Shinchu 10-09-2019 02:58 PM
Re: New SSD Enduro Parts
 
i think im asking for everyone: WHEN/WHERE can we get these awesome parts?!!?

B-MOW71 10-09-2019 03:11 PM
Re: New SSD Enduro Parts
 
Nice pretty pieces! I need![emoji3]


Sent from my iPad using Tapatalk

Topher Builds 10-09-2019 05:08 PM
Re: New SSD Enduro Parts
 
Very excited for these. Knuckles, link mounts, and diff covers will be ordered ASAP. Rear axle weights look nice too.

Any axle housings in the works? Or I suppose a better question is if the BTA knuckles work with the diamond housings and pinion location. Hmm.

LetsBash 10-09-2019 07:55 PM
Re: New SSD Enduro Parts
 
Yesss this is perfect! When's retailers having them?

Also what is the added weight of the components? I didn't see anything on the site

hillbillyrc 10-09-2019 08:00 PM
Re: New SSD Enduro Parts
 
Those diff covers!

durok 10-09-2019 08:18 PM
Re: New SSD Enduro Parts
 
Total awesomeness!

(but)

I sure was hoping for aluminum C-hubs as well...

GrimmTheTourist 10-09-2019 11:36 PM
Re: New SSD Enduro Parts
 
@durok
Note:
SSD SCX10 II Universal joint axle shafts give more steering (SSD00325)
Matching brass rear axle weights are available (SSD00354)
Alumimum C hubs will be available soon...



Quote:
Originally Posted by LetsBash (Post 5968809)
Yesss this is perfect! When's retailers having them?
Also what is the added weight of the components? I didn't see anything on the site

137 g for a knuckles set.
Thats is pretty heavy. I won't need anything else as I only want to balance out the cage I added in the back.

Probably will also get a diff cover for the front. "thumbsup"

SSD 10-10-2019 02:30 AM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by Shinchu (Post 5968694)
i think im asking for everyone: WHEN/WHERE can we get these awesome parts?!!?
As usual Amain and RPP will have them soon. Dif covers will be a week later than the brass as we are still packing them.

Quote:
Originally Posted by hillbillyrc (Post 5968811)
Those diff covers!
Yes they make the axle look less like Lego "thumbsup"

Quote:
Originally Posted by durok (Post 5968816)
Total awesomeness!

(but)

I sure was hoping for aluminum C-hubs as well...
In progress, they take longer to make.

Quote:
Originally Posted by Topher Builds (Post 5968760)
Any axle housings in the works? Or I suppose a better question is if the BTA knuckles work with the diamond housings and pinion location. Hmm.
I have an idea for axles but will lose BTA.

punkindrublik 10-10-2019 02:33 AM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by GrimmTheTourist (Post 5968836)
Alumimum C hubs will be available soon...
rpp is teasing us...

https://www.rpphobby.com/ProductDeta...tCode=SSD00357

soze 10-10-2019 04:54 AM
Re: New SSD Enduro Parts
 
Definitely going to pick these up. Been waiting for these to show up.

Sent from my LG-H931 using Tapatalk

svt923 10-10-2019 07:09 AM
Re: New SSD Enduro Parts
 
All the kudos to SSD for being the only company making aftermarket diff covers that knows the lower edge should be smooth as possible and the entire cover doesn't need to be 2 feet thick. "thumbsup"

When you're done working the magic on the Element, can you do the diff cover thing for the TRX4? It's been 2+ years and no one else has figured out how to make a decent diff cover.

B-MOW71 10-10-2019 07:13 AM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by svt923 (Post 5968890)
All the kudos to SSD for being the only company making aftermarket diff covers that knows the lower edge should be smooth as possible and the entire cover doesn't need to be 2 feet thick. "thumbsup"



When you're done working the magic on the Element, can you do the diff cover thing for the TRX4? It's been 2+ years and no one else has figured out how to make a decent diff cover.


X2[emoji106]


Sent from my iPhone using Tapatalk

Jim85IROC 10-10-2019 09:33 AM
Re: New SSD Enduro Parts
 
Those knuckles are substantially heavier than the Beef Tubes knuckles. Maybe I should have waited...

Topher Builds 10-10-2019 10:54 AM
Re: New SSD Enduro Parts
 
Quite a bit cheaper too I believe. If you really wanted to, I’m sure you could find a buyer for the BT knuckles. Perhaps they’ll let you exchange for a BT front axle.

plf 10-10-2019 11:31 AM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by Topher Builds (Post 5968760)
Very excited for these. Knuckles, link mounts, and diff covers will be ordered ASAP. Rear axle weights look nice too.

Any axle housings in the works? Or I suppose a better question is if the BTA knuckles work with the diamond housings and pinion location. Hmm.

Topher Builds, I fitted an SSD AR44 axle on my element keeping the element c-hubs and knuckles. A perfect wedding! I Just installed in the AR44 pumpkin some 27x8 T gears, giving me 21% of overdrive.
I kept the BTA steering : just had to bend and adjust the steering link, due that the trans sit higher in the AR44.
Next step will be the SSD knuckles

Cheers

Topher Builds 10-10-2019 11:43 AM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by plf (Post 5968969)
Topher Builds, I fitted an SSD AR44 axle on my element keeping the element c-hubs and knuckles. A perfect wedding! I Just installed in the AR44 pumpkin some 27x8 T gears, giving me 21% of overdrive.
I kept the BTA steering : just had to bend and adjust the steering link, due that the trans sit higher in the AR44.
Next step will be the SSD knuckles

Cheers
This is exactly what I would like to do, ssd diamond with od gears and keeping the BTA. Happy to know you’re having success with that endeavor! "thumbsup"

Any chance you could post a pic of the steering link?

Shinchu 10-10-2019 01:09 PM
Re: New SSD Enduro Parts
 
hmm i better get my wife something good for our anniversary next month hahaha

THANK YOU SSD!!!

rattmobbins 10-10-2019 03:02 PM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by svt923 (Post 5968890)
When you're done working the magic on the Element, can you do the diff cover thing for the TRX4? It's been 2+ years and no one else has figured out how to make a decent diff cover.

Kinda shocked they don't make diff covers for the TRX4, given it's popularity and time on the market.


What's the story there SSD?

SSD 10-11-2019 02:39 AM
Re: New SSD Enduro Parts
 
Quote:
Originally Posted by rattmobbins (Post 5969050)
Kinda shocked they don't make diff covers for the TRX4, given it's popularity and time on the market.

What's the story there SSD?
The CNC machine time needed for the TRX4 diff cover is higher than others. Means we cant sell it in the same price range as our other diff covers. Then people will complain/not buy. Plus you got the cheap factory brands selling them at low prices.

Price seems to be most guys main factor these days...

I might revisit it when I have time.


All times are GMT -6. The time now is 04:57 AM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com