Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Element RC 1/10 Enduro Trail Truck Sendero
Loading

Notices

Thread: Ecto Drivelines

Reply
 
LinkBack Thread Tools Display Modes
Old 08-13-2022, 04:38 PM   #1
Pebble Pounder
 
Join Date: Mar 2013
Location: HOOPER
Posts: 102
Default Ecto Drivelines

Is anyone aware of any Steel replacement Drivelines that will work with the Ecto? Or are there any out there for the Knightrunner ?

Sent from my SM-G781V using Tapatalk
redneckwraith is offline   Reply With Quote
Sponsored Links
Old 08-13-2022, 09:26 PM   #2
Rock Crawler
 
Join Date: Jan 2022
Location: st louis
Posts: 574
Default Re: Ecto Drivelines

Some can be made to work but not needed by any stretch. I run an AXE 2300 kv on 3s LIHV and have for months of hard abuse, driveshafts are still stock and perfectly fine.

Also Knightrunner and ecto use all the same parts except for suspension linkage set up. So differentials, transmissions, driveshafts etc all the exact same. Only differences are ecto trailing arms for GKS and the knightrunner IFS in the front instead of solid axle.

This goes for all element enduros. Either IFS front or normal straight axle then either 4 link or GKS trailing arms in the rear (and link length changes for 12.3 vs 12.8 wheel base) EVERYTHING ELSE is the same between all element enduros. Even the solid axle knuckles are the same in the front for solid axle or ifs. So you can use the same brass knuckles on both the knightrunner or ecto (or trailrunner, senduro, Gatekeeper and so on)

Sent from my SM-S906U using Tapatalk

Last edited by tigris99; 08-13-2022 at 09:30 PM.
tigris99 is offline   Reply With Quote
Reply



Ecto Drivelines - Similar Threads
Thread Thread Starter Forum Replies Last Post
Redneck Ecto redneckwraith Element RC 1/10 Enduro Trail Truck Sendero 11 05-17-2023 03:50 PM
No ecto news ? crazee horse Element RC 1/10 Enduro Trail Truck Sendero 0 05-30-2021 03:37 PM
Ecto-1 mmatthews 1.5 Scale Rigs 133 01-02-2014 07:29 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com