catpwreds Hallstyle 2013 build

[catpwred]

This should be interesting. ive been wanting to update my current hallstyle with the new improved hallstyle since john brought it to the compound. so now that i final got a chance to get 1 i was all over it.

heres the parts list

F/R AXLES
clover tubes frnt
axial c's
vanquish knuckles
berg/berg 300's

DLUX rear tubes
DLUX rear shafts
drilled gears cut down locker

ELECS
2x micro sidewinders
brood 45's
7950
bec

WHEELS and TIRES

DLUX Carbon faced 1in
shaved sedonas

misc stuff

DLUX ti lower links

more to come as i get goin im lookin to get in the mid 4lb range so we'll see how i do

[stubs179]

Looking good! Are you going to paint the chassis plates?

There are going to be a ton of Hallstyles and Wendover!

[CrAwLeR13]

Looks good Jason. Better get to work Tuesday will come fast.

[Erik D_lux]

Looks good!

Is that weight you have above (78G) with stainless screws and .090 side plates?

Looks like I better get a vendors thread going. You guys are too fast.

[catpwred]

Originally Posted by stubs179

Looking good! Are you going to paint the chassis plates?

There are going to be a ton of Hallstyles and Wendover!

at the moment im not goin to paint the plates stubby. this 1 might not be there i have to get clearance from the wifey to go see if she wants to do a weekend by her self with the baby

Originally Posted by CrAwLeR13

Looks good Jason. Better get to work Tuesday will come fast.

it should be ready gota do something for top links still might be callin ya to thred some up on the lathe

Originally Posted by Erik D_lux

Looks good!

Is that weight you have above (78G) with stainless screws and .090 side plates?

Looks like I better get a vendors thread going. You guys are too fast.

yes Erik its 8th" plate with stainless screws i dont have any of those fancy ti screws

[catpwred]

Axles done

[binaryterror]

This might be an odd place to post/ask this, but the lack of adjustment on this chassis is unique. Have you BYBRCC and Hallstyle guys found any issues not having enough adjustment (especially between Berg/XR10 axle geometrys)?

[CrAwLeR13]

Could loose some more weight with dlux front tubes. They r a must.

[CrAwLeR13]

Originally Posted by binaryterror

This might be an odd place to post/ask this, but the lack of adjustment on this chassis is unique. Have you BYBRCC and Hallstyle guys found any issues not having enough adjustment (especially between Berg/XR10 axle geometrys)?

I have this chassis on both my berg and xr axles. I use chaotic xr lower links on both my rigs. The lack of adjustment as u say has not been an issue. Cause what's there just works in my opinion.

[Erik D_lux]

Originally Posted by binaryterror

This might be an odd place to post/ask this, but the lack of adjustment on this chassis is unique. Have you BYBRCC and Hallstyle guys found any issues not having enough adjustment (especially between Berg/XR10 axle geometrys)?

I have always thought it was a brilliant idea. Now people cant screw up the geometry if they want to.

Its the same way I designed my chassis. There are only 2 holes to choose from. On Bergs, I mostly use my link mounts to adjust geometry anyway. Much easier and faster!

[catpwred]

Originally Posted by CrAwLeR13

Could loose some more weight with dlux front tubes. They r a must.

Been thinkin about addin them i know they have been holdin up gd on everybody's. rig

[catpwred]

Originally Posted by binaryterror

This might be an odd place to post/ask t
whis, but the lack of adjustment on this chassis is unique. Have you BYBRCC and Hallstyle guys found any issues not having enough adjustment (especially between Berg/XR10 axle geometrys).

Most of us in the club dont change are rig for any comp we'll Run it as its set so theres no reason for multi holes and the cross over between the 2 axles i can take johns chassis plate off his xr and the holes wellu match. its the same geometry and we havent had an issue with it

[catpwred]

Getting a little closer, hope the wheels we'll be here this weekend then i can get a gd weight and see how much fat ive lost

[Erik D_lux]

Originally Posted by catpwred

Been thinkin about addin them i know they have been holdin up gd on everybody's. rig

Better hurry, they go quick these days. I just got finished with a HUGE run on Wed and now only have 1 set.

Wheels should be there today

[catpwred]

Originally Posted by Erik D_lux

Better hurry, they go quick these days. I just got finished with a HUGE run on Wed and now only have 1 set.

Wheels should be there today

moving product is always a gd thing and when it goes out of stock it doesnt take weeks to get it in stock again. thats 1 of the awesome things about ur DLUX stuff

yay wheels

[CrAwLeR13]

Checked the tracking and it says lost. Sorry man no wheels today

[catpwred]

Were it sits for the nite

[catpwred]

got the wheels today thanks DLUX for some more awesomeness. tommrrow's project to get rid of the wire mess. the part i hate the most.

here's a ball park weight just need to add panels so i lost a little bit and i could still lose some more but that'll come in time, shocks will hit the lathe and some front tubes from DLUX.

[donzx12]

looking good fix them wires and you are set for tue.

[catpwred]

Well here it is ready for its trial run tommrrow nite in the compound. i lost about 3.5 oz in the rebuild and still have some to lose in the time to come. i'll see how it works at this weight and go from there.