Alex's berg take I

[AlexG]

Hi everyone,

I decided to try some berg axles for 2013, I'm really excited to try these


My axles are ready, electronic also, now I just need to get my chassis cutted then work on linking, this may take a couple of weeks tough.

AXLES

-Berg V1 cases
-Dlux tubes
-SDS 300 HD's shaft
-Dlux shaft
-Rear Dlux CF upper link mount
-Dlux delrin upper link mount
-Dlux clear gear box cover F/R
-SDS 3rd gear
-Dlux lathing job and bigger pin mod
-RCBros 4th gear locker
-Vanquish wraith Knuckle & CHub
-Dlux NO SLOP bushing
-NCD knuckle weight
-RR electronic motor mount
-RR XR10 axle battery mount
-Fast Eddy bearing


CHASSIS

-REBEL chassis
-Traxxialfest shock
-3/16'' Ti and Al link


ELECTRONIC

-4pl
-Dual Tekin FXR with ci 4s pack
-HH crawlmaster 13t custom
-Hitec 7950th
-CC bec
-NanoTech 3s 360mah






Special thanks to all the great vendor out there who makes great and innovative products, at Erik, he's the man, you can't beat his customer service and Tomy for his cutting service.


Thanks for looking, feel free to comment


Alex

[redrokin00XJ]

That's looking sweet Alex..... you're going to really driving a Berg

[roodstreepje]

Hi Alex,

That's a nice list for your crawler.

Enjoy your building.

Hope to see you soon at the comps

[TheSCorpionKing]

Solid parts list. How will you be utilizing the Rowdy XR axle mount?

[AlexG]

Originally Posted by redrokin00XJ

That's looking sweet Alex..... you're going to really driving a Berg

Thanks Jason

Originally Posted by roodstreepje

Hi Alex,

That's a nice list for your crawler.

Enjoy your building.

Hope to see you soon at the comps

Thanks Steven, winter is coming too fast

Originally Posted by TheSCorpionKing

Solid parts list. How will you be utilizing the Rowdy XR axle mount?

Inspiration is coming from Harvo's thread, if that don't work I'll make a battery mount like nicodrive01 wich is a clever solution also.

[ax10tn]

Inspiration is coming from Harvo's thread, if that don't work I'll make a battery mount like nicodrive01 wich is a clever solution also.[/QUOTE]

Harvo's idea works very well with no issues and i just place a order for one also after seeing his

[TheSCorpionKing]

Originally Posted by AlexG

Inspiration is coming from Harvo's thread, if that don't work I'll make a battery mount like nicodrive01 wich is a clever solution also.

Ah.. I had to go look at it. I really should check in on more threads

[Erik D_lux]

I had to look and see who this "AlexG" guy is

Looks great Alex. I cant wait to see what you think when you drive it.

[DickyT]

Looking forward to the build Alex

Hooray single pivot chassis!

[AlexG]

Originally Posted by TheSCorpionKing

Ah.. I had to go look at it. I really should check in on more threads

I've been spying hard this past two months in the berg section

Originally Posted by Erik D_lux

I had to look and see who this "AlexG" guy is

Looks great Alex. I cant wait to see what you think when you drive it.

LOL thanks for your great products

Originally Posted by DickyT

Looking forward to the build Alex

Hooray single pivot chassis!

Thanks can't wait to see where you'll take the UGC Stingay.

[AlexG]

Got my electronic back and a small package from rowdy racing.










Next on the list is wiring then put everything behind the motor

[TheSCorpionKing]

Looks good. After a little studying I tried to use my old XR mount on my turned down tubes. It looks like it'll fit much the same, but appears the way I have my linkage and axle clocked, my pack sit's a bit higher than i'd like.

Now hurry up and show off that cool chassis you have

[AlexG]

Originally Posted by TheSCorpionKing

Looks good. After a little studying I tried to use my old XR mount on my turned down tubes. It looks like it'll fit much the same, but appears the way I have my linkage and axle clocked, my pack sit's a bit higher than i'd like.

Now hurry up and show off that cool chassis you have

A friend of mine is running it on his CCD tubes with a 850 pack, so I believe it can be fitted pretty much on every berg, with super 300 tough. The pack is sitting higher than what would be perfect but, give or take, I need to fit everything on my front axle and that's the only way to achieve it while keeping an easy battery acces.


Everything relies on Tomy right now, I'll be safe and say that I'll have it in 2 weeks and half, knock on wood

[Hittman]

Those axles look so awsome man.. Its sweetness like these that make me want to switch to berg

[TheSCorpionKing]

Originally Posted by AlexG

A friend of mine is running it on his CCD tubes with a 850 pack, so I believe it can be fitted pretty much on every berg, with super 300 tough. The pack is sitting higher than what would be perfect but, give or take, I need to fit everything on my front axle and that's the only way to achieve it while keeping an easy battery acces.


Everything relies on Tomy right now, I'll be safe and say that I'll have it in 2 weeks and half, knock on wood

I'll probably give it a shot. I want to take my guts out of the chassis, and I'll have to move the battery to get that stuff behind the motor.

And anything from Tomi is worth the wait

[EverettY]

Originally Posted by TheSCorpionKing

And anything from Tomi is worth the wait

Agreed! Awesome quality products and even better Customer Service.

So are you running some of Tomi's wheels as well?

[lowlow]

NICE!! That red and black is FIRE bro.. gonna have to keep up with this build.... looks like ya got the parts list A1!! This build may cost me MORE $$ def has me thinkin bout different color screws for the sniper...

[AlexG]

Originally Posted by Hittman

Those axles look so awsome man.. Its sweetness like these that make me want to switch to berg

Thanks man grass is greener on the other side of the fence

Originally Posted by TheSCorpionKing

I'll probably give it a shot. I want to take my guts out of the chassis, and I'll have to move the battery to get that stuff behind the motor.

And anything from Tomi is worth the wait

Will watch your thread for updates on the Mini-mall

Originally Posted by EverettY

Agreed! Awesome quality products and even better Customer Service.

So are you running some of Tomi's wheels as well?

Agreed, Tomi is an awesome guy to deal with

Nope custom wheels cutted by Tomi, nothing fancy though.

Originally Posted by lowlow

NICE!! That red and black is FIRE bro.. gonna have to keep up with this build.... looks like ya got the parts list A1!! This build may cost me MORE $$ def has me thinkin bout different color screws for the sniper...

Thanks bro, actually the red is even a little bit faster than any other color

[lowlow]

hmmm, and i woulda def thought the black screws would be!!

[losiking1]

Looks like a great build Alex. Took the LCC as far as it would go?? Be watching this for sure!!