The Transformer T1e Stealth

[ax10tn]

After taking some time off from the crawlers to focus on my 1.1 jeep i have been missing the crawlers so I'm back to build another rig.. unfortunately when i sold my other rigs i sold everything so im starting over from scratch and ive been collecting parts for a few weeks now and this is where im at....but patience will give me the rig i want to have so this build may take some time to build ...

specs as of now :

Chassis:

T1e Stealth (hand delivered) thanks Rusty
D_Lux alum cross braces

Front Axle :
Berg cases
D_Lux delrin tubes
D_Lux milled motor mount
D_Lux lightned gears
D_Lux bigger pin mod
D_Lux tie rod with TI sliders and drag link
RcBros alum locker
Super 300's
VP 8degree chubs
VP 8degree knuckles
Big Ron knuckle weight

Rear Axle :
Berg cases
D_Lux delrin tubes
D_Lux milled motor mount
D_Lux lightned gears
D_Lux bigger pin mod
RcBros alum locker
RcBros upper link mount
axlemaster rear shafts

Suspension :
D_Lux TI 3/16 lower links with TI sliders
D_Lux TI 1/8 upper links
Big Bore shocks turned down and cap mod done by D_Lux
Jeepindoug spring retainers
Mini T springs

Wheels/Tires :

T1e Porsche wheels
Boss Claws

Skins :

Bumble Bee Transformer skins thanks to Michelle for bringing the idea up for these...



yes , yes i know the cab in the picture is not the stealth will have some more pics up soon....

[whillinwillys]

Looks awesome man! This will be a nice truck!

[ax10tn]

Cases powdercoated mirror black and upper link mount is sunny yellow done by me...

[Harvo]

Looks great! Glad you are getting back into the game.

[Erik D_lux]

Looks good man.

I like the touch of yellow vs. the touch of black.

[ax10tn]

Originally Posted by Erik D_lux

Looks good man.

I like the touch of yellow vs. the touch of black.

Thanks Erik .. I like it better than the last one I done with all the yellow but I think I done it all up that way just to show off the powdercoating .....

[ax10tn]

T1e Stealth chassis with D_Lux Ti uppers , lower and the steering link along with D_Lux Ti link sliders...

T1e Porsche wheels which i will be turning into beadlocks thanks to D_Lux for his beadlock channels and aluminum spacers

[CrawlrKing]

Coming allonge nice ! Where did you get rear and front lowers ?

[ax10tn]

Originally Posted by CrawlrKing

Coming allonge nice ! Where did you get rear and front lowers ?

All links are from D_Lux ... Erik is a great guy to do business , great communication ... All his work is top notch

[M_ENERGY]

Looking good man!! Can't wait to comp/hang out again with ETRC!! Love the wheels

[ax10tn]

Originally Posted by M_ENERGY

Looking good man!! Can't wait to comp/hang out again with ETRC!! Love the wheels

Thanks man .. Yea the ETRC guys are a awesome group of guys ! Yea I love the wheels and thought I would try something different by turning them into a beadlock

[ax10tn]

Not much of an update but I received my topless RR battery mount today which i will be powdercoating . Will post pics tomorrow ..

[ax10tn]

I want to brag a little bit .. I can't vouch for any others because I've never been in this situation . But as I was coming home from work today a guy ran a red light and T-boned me and completely totaled the car I drive to and from work and I had a set of T1e carbon fiber wheels with me that rusty had give me to deliver them to Harvo needless to say the wheels went for a ride they went from the passengers side of the car to the drivers side and back into the passengers side floorboard up into the dash which was broke and busted from the impact and the wheels made it through all this without a scratch...

[Harvo]

Originally Posted by ax10tn

I want to brag a little bit .. I can't vouch for any others because I've never been in this situation . But as I was coming home from work today a guy ran a red light and T-boned me and completely totaled the car I drive to and from work and I had a set of T1e carbon fiber wheels with me that rusty had give me to deliver them to Harvo needless to say the wheels went for a ride they went from the passengers side of the car to the drivers side and back into the passengers side floorboard up into the dash which was broke and busted from the impact and the wheels made it through all this without a scratch...

Holy COW

You all right? Were you in the Jeep?

[ax10tn]

Originally Posted by Harvo

Holy COW

You all right? Were you in the Jeep?

No I was in my car I drive back and forth just to work . A big ole boat a 97 crown Victoria but surprisingly it gets like 25mpg . I'm ok I think my arm is really burnt up from the air bag but my thumb is dislocated or something.. So to the dr I go tomorrow ... But hey your wheels made it through ...

[ax10tn]

i small update ....

x2 sidewinder micros / 10amp BEC
Robi servo horn
Pinion gears
RR battery mount powdercoated matte black
BC red dots

[ax10tn]

esc's sent out today to be smashed...and got my servo from battlefield rc...everything is coming together on it....

[greencrawler]

Are you not done yet??!!??










Jk looks good man, can't wait to see it on the rocks. You going to make it in a couple of weeks?

[ax10tn]

Originally Posted by greencrawler

Are you not done yet??!!??










Jk looks good man, can't wait to see it on the rocks. You going to make it in a couple of weeks?

lol haha i wish im down to the hardware for my wheels and a new radio thats about all i got left and a few hrs of getting a good set up on it from the master....

[Erik D_lux]

Man, I am loving that full black axle!