RCCrawler Forums

ClassiCutCustoms · 09-06-2013, 03:25 PM

Okay, with all the building going on I decided to post up my new rig that I am very excited about. I built a rig two years ago and I was beginning to think it was turning old school :-P

I took my old CVDs, rear straight axles, and electronics and threw the rest away. Out with the old..... In with the new.

Quick run down of the parts.....

Axles are Bulldog Berg cases and Bulldog delrin tubes. The chassis is the Bulldog Pitbull. Wheels are Bulldog Carbon fiber with Voodoo tires and CI foams. Titanium links hold it all together. I have spent about 4 hrs on the rocks with it and love it. It side hills and will break over better than anything else I have driven. All up weight is 1704 grams.
Before you start picking it apart...... Yes there are a few loose wires..... It still needs a tidy up :-P

Here is the vendor post for purchase information

Bulldog Pitbull 2.2Pro chassis on Sale!

EverettY · 09-06-2013, 03:29 PM

Woow that looks awesome! Do you have some close up shots of everything?

mustangboy_347 · 09-06-2013, 04:05 PM

This is a amazing build buddy. Can we get some close ups on the rims and that there sweet looking chassis

Sent from my SCH-I545 using Tapatalk 2

BullfrogRC · 09-06-2013, 04:16 PM

I like rims. Are you running weights up front?

ClassiCutCustoms · 09-06-2013, 04:23 PM

Okay.... Took some more pics in the yard..... Enjoy.

Sent from my XT912 using Tapatalk 4

ClassiCutCustoms · 09-06-2013, 04:26 PM

Quote:

Originally Posted by BullfrogRC

I like rims. Are you running weights up front?

No weight at the moment..... Chassis is setup 60/40 and balanced out 1/4" from the front of the skid as is so I am running as is for now. It is the best climber I have driven and don't see the need for weight. I still have empty holders if I change my mind :-P

ClassiCutCustoms · 09-06-2013, 04:31 PM

Quote:

Originally Posted by bigron

Looks pretty sweet.... I hope we can get most of mine together tomorrow. You need to put in the build thread about not running a BEC with sidewinder micros and a high voltage servo.

Have your front case being cut right now...... Let's get it started!

Farmer · 09-06-2013, 06:56 PM

Looking sweet man👍 I'm digging the cases so far! I have officially scratched up them up today.....Hope to do work tomorrow in 2.2pro here in Prescott

Later,
Farmer

ClassiCutCustoms · 09-06-2013, 07:02 PM

Quote:

Originally Posted by Farmer

Looking sweet man I'm digging the cases so far! I have officially scratched up them up today.....Hope to do work tomorrow in 2.2pro here in Prescott

Later,
Farmer

Hey Fella,

Glad to hear from you..... Will be waiting anxiously tomorrow for the good news. B-) Good luck in the big show!

Alamo71 · 09-06-2013, 07:23 PM

That is one sick berg looks good clean build

Calderwood · 09-06-2013, 08:20 PM

Looks good! How thick is the chassis carbon fiber?

ClassiCutCustoms · 09-06-2013, 08:40 PM

2mm

Harvo · 09-07-2013, 05:49 AM

Are those 1/8" ti uppers?

ClassiCutCustoms · 09-07-2013, 06:47 AM

They are.

Sent from my XT912 using Tapatalk 4

sddill · 09-09-2013, 07:16 AM

Sweet

It looked really good on the rocks Sat..Now get yours going Ron so we can go crawl some more....

ClassiCutCustoms · 09-09-2013, 07:31 AM

Quote:

Originally Posted by sddill

Sweet

It looked really good on the rocks Sat..Now get yours going Ron so we can go crawl some more....

Like this? Ron's new Slider..... Lol

scoutdawg · 09-09-2013, 07:47 AM

Are you selling more than just the cases right now?
Great effort into making what looks like a great product.

ClassiCutCustoms · 09-09-2013, 09:17 AM

Quote:

Originally Posted by scoutdawg

Are you selling more than just the cases right now?
Great effort into making what looks like a great product.

Yes I am..... I haven't had a chance to get some good pictures for some vendor posts but everything in that picture above is for sale.... Except the shocks of course... Lol

I have cases and matching tubes, the Pitbull chassis, carbon wheels, and I make the links to fit that chassis......

Barry

ClassiCutCustoms · 09-09-2013, 10:01 AM

FYI..... I have two more like this one being built for some OH guys..... They are so excited about this that they can't sleep at night. PA, OH, MI..... Beware..... Your new competition! :-P

Sent from my XT912 using Tapatalk 4

bigstu · 09-09-2013, 12:11 PM

That is some great work. Congrats.
I have a set of clover design tubes and some HR gears that are sitting on my shelf at home, just trying to find some axle shafts to make it all work.
Maybe we need to talk. Wonder if I could make that chassis work with a body. Hmmmmm

09-06-2013, 03:25 PM	#1
ClassiCutCustoms RCC Addict Join Date: Aug 2013 Location: South East Posts: 1,197	Bulldog Berg Build for 2014 Okay, with all the building going on I decided to post up my new rig that I am very excited about. I built a rig two years ago and I was beginning to think it was turning old school :-P I took my old CVDs, rear straight axles, and electronics and threw the rest away. Out with the old..... In with the new. Quick run down of the parts..... Axles are Bulldog Berg cases and Bulldog delrin tubes. The chassis is the Bulldog Pitbull. Wheels are Bulldog Carbon fiber with Voodoo tires and CI foams. Titanium links hold it all together. I have spent about 4 hrs on the rocks with it and love it. It side hills and will break over better than anything else I have driven. All up weight is 1704 grams. Before you start picking it apart...... Yes there are a few loose wires..... It still needs a tidy up :-P Here is the vendor post for purchase information Bulldog Pitbull 2.2Pro chassis on Sale! Last edited by ClassiCutCustoms; 09-17-2013 at 07:24 PM.

09-06-2013, 03:29 PM	#2
EverettY E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR Posts: 3,591	Re: Bulldog Berg Build for 2014 Woow that looks awesome! Do you have some close up shots of everything?

09-06-2013, 04:16 PM	#4
BullfrogRC Pebble Pounder Join Date: Apr 2008 Location: bfe Posts: 189	Re: Bulldog Berg Build for 2014 I like rims. Are you running weights up front?

09-06-2013, 06:56 PM	#8
Farmer RCC Addict Join Date: Dec 2007 Location: Rochester Hills Posts: 1,773	Re: Bulldog Berg Build for 2014 Looking sweet man👍 I'm digging the cases so far! I have officially scratched up them up today.....Hope to do work tomorrow in 2.2pro here in Prescott Later, Farmer

09-06-2013, 07:23 PM	#10
Alamo71 Quarry Creeper Join Date: Apr 2013 Location: Wise Posts: 366	Re: Bulldog Berg Build for 2014 That is one sick berg looks good clean build

09-06-2013, 04:05 PM	#3
mustangboy_347 Rock Crawler Join Date: Feb 2009 Location: LaGrange Posts: 899	This is a amazing build buddy. Can we get some close ups on the rims and that there sweet looking chassis Sent from my SCH-I545 using Tapatalk 2

09-06-2013, 04:23 PM	#5
ClassiCutCustoms RCC Addict Join Date: Aug 2013 Location: South East Posts: 1,197	Okay.... Took some more pics in the yard..... Enjoy. Sent from my XT912 using Tapatalk 4

09-06-2013, 08:20 PM	#11
Calderwood I wanna be Dave Join Date: May 2007 Location: Fairfield ME Posts: 3,886	Re: Bulldog Berg Build for 2014 Looks good! How thick is the chassis carbon fiber?

09-06-2013, 08:40 PM	#12
ClassiCutCustoms RCC Addict Join Date: Aug 2013 Location: South East Posts: 1,197	2mm Last edited by ClassiCutCustoms; 09-06-2013 at 09:28 PM.

09-07-2013, 05:49 AM	#13
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	Re: Bulldog Berg Build for 2014 Are those 1/8" ti uppers?

09-07-2013, 06:47 AM	#14
ClassiCutCustoms RCC Addict Join Date: Aug 2013 Location: South East Posts: 1,197	They are. Sent from my XT912 using Tapatalk 4

09-09-2013, 07:16 AM	#15
sddill RCC Addict Join Date: Nov 2007 Location: E.T.R.C. Posts: 1,575	Re: Bulldog Berg Build for 2014 Sweet It looked really good on the rocks Sat..Now get yours going Ron so we can go crawl some more....

09-09-2013, 07:47 AM	#17
scoutdawg Pebble Pounder Join Date: Mar 2009 Location: nc Posts: 194	Re: Bulldog Berg Build for 2014 Are you selling more than just the cases right now? Great effort into making what looks like a great product.

09-09-2013, 10:01 AM	#19
ClassiCutCustoms RCC Addict Join Date: Aug 2013 Location: South East Posts: 1,197	FYI..... I have two more like this one being built for some OH guys..... They are so excited about this that they can't sleep at night. PA, OH, MI..... Beware..... Your new competition! :-P Sent from my XT912 using Tapatalk 4 Last edited by ClassiCutCustoms; 09-09-2013 at 10:04 AM.

09-09-2013, 12:11 PM	#20
bigstu RCC Addict Join Date: Mar 2010 Location: Auburn, MI Posts: 1,177	Re: Bulldog Berg Build for 2014 That is some great work. Congrats. I have a set of clover design tubes and some HR gears that are sitting on my shelf at home, just trying to find some axle shafts to make it all work. Maybe we need to talk. Wonder if I could make that chassis work with a body. Hmmmmm

Sponsored Links

Bulldog Berg Build for 2014 - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2014 chevy corvette	Cypher	Chit Chat	108	04-30-2017 02:23 PM
Bulldog Berg Gear cases	ClassiCutCustoms	Axles, Trannys, T-case	56	08-21-2014 06:24 PM
Bulldog Berg Gear cases.... Sneak peek	ClassiCutCustoms	EnRoute Berg	55	01-15-2014 09:28 AM
2013 T1E Berg by Colby Now with Bulldog Gear Cases	Colby	EnRoute Berg	151	10-17-2013 01:01 AM
Berg running HaVoc.... Jp's Berg Build	run2jeepn	EnRoute Berg	52	06-19-2009 11:32 AM

RCCrawler Forums

Thread: Bulldog Berg Build for 2014