Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > EnRoute Berg
Loading

Notices

Thread: Question about berg stall with my set up...

Reply
 
LinkBack Thread Tools Display Modes
Old 02-09-2014, 09:28 PM   #1
Rock Crawler
 
Join Date: May 2008
Location: The Beautiful South
Posts: 617
Default Question about berg stall with my set up...

Just got this thing put together after years of sitting built from box kit purchase. I think I bought the original berg 6 years ago (if I remember correctly). Any way I had these spare parts to build it with:

Novak Super rooster esc
twin brushed Venom 19d motors with 12t pinion wired in series

Now my question is about the clodstall or "berg stall" that happens with trying to go up an incline or when one axle isn't touching the ground. The other axle gets no power at all because of the less resistance axle getting it all and it free spins while the other one is stalled. Is there a fix for this nowadays? Or is this just a fact of life with the twin motor rigs? My super clod axled rigs don't seem to have it nearly as bad as they can go up an incline that my 2.2 1/10th scale berg can't get up.

I know the cheapo motors aren't helping anything, but I only have integy cans in my supers and they seem to do a lot better, although those are 45 or 55t motors.

thanks for reading and please educate me.

Last edited by Master Basher; 02-09-2014 at 09:53 PM.
Master Basher is offline   Reply With Quote
Sponsored Links
Old 02-10-2014, 01:02 AM   #2
TSK
Shelf queen
 
TSK's Avatar
 
Join Date: Aug 2008
Location: Internet
Posts: 5,857
Default Re: Question about berg stall with my set up...

19t motors Re way too fast and probably just don't have enough cajoles. And running them in series probably isn't helping either.

IIRC, running motors in series gives both of them half the power, whereas running them in parallel would give them each 100%

Wiring the motors in parallel will probably help a bunch.

Last edited by TSK; 02-10-2014 at 01:13 AM.
TSK is offline   Reply With Quote
Old 02-10-2014, 01:13 AM   #3
Rock Crawler
 
Join Date: May 2008
Location: The Beautiful South
Posts: 617
Default Re: Question about berg stall with my set up...

thanks. I'll switch up the wiring and see how much it changes.
Master Basher is offline   Reply With Quote
Old 02-10-2014, 10:57 AM   #4
I wanna be Dave
 
Join Date: Mar 2008
Location: In the Dark Edges of your Mind
Posts: 6,386
Default Re: Question about berg stall with my set up...

Dude. .. I remember you. We competed together years ago at little rock city. Good to see you still crawl.
Harvo is offline   Reply With Quote
Old 02-10-2014, 12:17 PM   #5
Rock Crawler
 
Join Date: May 2008
Location: The Beautiful South
Posts: 617
Default Re: Question about berg stall with my set up...

^thanks. getting back into these forums now after so long, so much has changed! The game has really changed. I prolly got a few pics of your old rig. I took a bunch of pics at those comps.
Master Basher is offline   Reply With Quote
Reply



Question about berg stall with my set up... - Similar Threads
Thread Thread Starter Forum Replies Last Post
clod stall on berg jimbiss EnRoute Berg 18 08-30-2009 11:15 PM
Berg stall? Maybe ESC? Maybe not. Help please Scottmisfits EnRoute Berg 26 01-10-2009 07:28 PM
Question about berg stall/dig. tuner EnRoute Berg 17 10-28-2008 02:50 PM
Homemade Stick with dual ESC ( Zero Stall Set Up ) mikesativa Tamiya Clod Buster 12 10-14-2008 07:54 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com