A Remedy found...

[sic1to]

Originally Posted by winnerone23

Did a little crawlering and test and tune day, with another club member..

I Love this rig!!!
BmachineRC, Dlux, HH, Krazed Builds, Boss Claws!!!
No fancy shocks!



Batteries ran! Nanotech 450mah 65-130c... Powah!!!

Time to start doing that, Every day!

Yeah yeah looks like ya have alot of batteries in a pile from here...like you tell me VIDEO or it didnt happen!

I caught the lil shock comment every time I check the scx shocks they have leaked down & make a mess! I also recently pulled cap off shock body practicing not to mention last year at NENC when I snapped a shock body into....those days are over!!!

I am glad ya back on here honey😚

[winnerone23]

Originally Posted by sic1to

Yeah yeah looks like ya have alot of batteries in a pile from here...like you tell me VIDEO or it didnt happen!

I caught the lil shock comment every time I check the scx shocks they have leaked down & make a mess! I also recently pulled cap off shock body practicing not to mention last year at NENC when I snapped a shock body into....those days are over!!!

I am glad ya back on here honey

Ran that pile of batteries, again, today..

No video.. no comp. Just burning day light..
Maybe we can do work and get video at ECC, for both of our threads!

Learn to drive and those shocks wouldn't have such a hard life!


The best part about this spot.. is the hand rail, up there, and the bike path on the other side of it! Hahaha...

[winnerone23]

Time to roll out of Bama!

ECC 2017..

[winnerone23]

Local comp this past Sunday..
After course 2..

For course 3..

[Tom G]

OUCH I had a SuDu chassis that kinda looked like the behind the cab & the rear shock Ya just cant drop them of a 25 ft cliff

[nerby149]

Originally Posted by winnerone23

Local comp this past Sunday..
After course 2..

For course 3..

Well what are you gonna do to fix that, hmmm.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[winnerone23]

Originally Posted by Tom G

OUCH I had a SuDu chassis that kinda looked like the behind the cab & the rear shock Ya just cant drop them of a 25 ft cliff

Or put 1000+ hours on it! Lol..

Originally Posted by nerby149

Well what are you gonna do to fix that, hmmm.

Sent from my SAMSUNG-SM-G891A using Tapatalk

I used a panel from my good friend, Nerby, that sent me a care package!

All back together and ready for the rocks!

It's Amazing how much material a new chassis plate has!

[sic1to]

Well it finally gave up after many hrs on it! I'd say its good for another 1k hrs or so👍 You ready for NEMS?

[Robbob]

Originally Posted by sic1to

Well it finally gave up after many hrs on it! I'd say its good for another 1k hrs or so👍 You ready for NEMS?

No body bring any zip ties, zip ties are banned from NEMS!!!

[winnerone23]

Originally Posted by sic1to

Well it finally gave up after many hrs on it! I'd say its good for another 1k hrs or so You ready for NEMS?

I'm ready!!! Well, the trucks are . Not sure my driving is! Need more practice!

Originally Posted by Robbob

No body bring any zip ties, zip ties are banned from NEMS!!!

No worries.. I finished half a course and Kyle ran it, after the break, with a perfect course!
It's a Remedy, even when it's broke, it Remedies that with a perfect score!

[winnerone23]

Hmm.. soooooo,I wasn't so very ready for NEMS! No repeat 1st place, this year, at NEMS...

A month or so later and I had a whole 3 more packs on the Remedy!
"Ready for NENC!" (Not really).. lol..
This past weekend was NENC and things were feeling good!
1st course, prefect run.. -40
2nd course, perfect run, for what I did. (One bonus was way out and maybe a super could have done it) -30
3rd course.. RIcrawler and myself built.. umm.. not looking so hot! 5-6 finishers and best score was a 10.. yikes!
I just rolled with the momentum I was running with and knocked it out! Through gate 5 and all is well.. at gate 6, my teammate M_Energy steps up and spots me thru! The rest was just as clean and finished out with a -30...

Time for lunch and things to show down a touch.. kinda liked that momentum and made a dumb mistake on gate 1 of course 4 and a reverse.. -29
Course 5.. second guessed myself. Reversed out and came a different way. Cost myself a gate and reverse.. -29..
Then course 6.. 2 or 3 finishers? I didn't. I wasted too much time on gate 7.. +24..

Going into the finals course, I was sitting in 1st place by 15 points..

By the 3rd driver on course, we noticed a hellashis storm rolling in! Derrick went to run and the storm is moving fast! It's getting Black, winds are kicking up, and lightning is flashing!
By this time, everybody is running!! Come on! Come on!!!!
At this point I'm rushing to plug my battery in..
Ok, I got power.. Go!!!
Gate one.. Dig... Oh shit, no steering!!!
(Rushing to plug in, I pulled my Rx wires loose)
Touch repo, right off the bat!
Ok GO!!!!!
I rushed through the course and killed the rest of it! (Minus a boundary and couple reverse)
I think I ran the course in 3 minutes, but felt like 90 seconds!
By gate 3, I stopped and had to show everybody down.. lol..
I finished and we all headed for the pavilion..
Not 3 seconds later, the drops started hitting the roof.. 30 seconds later, it was a Killer down pour and an Awesome storm!!!

If you haven't made it to NENC, you are Missing Out!!!!
The comp is nothing short of Amazing! In all aspects!!!
Thanks Jslick, for everything you do!!!

[tapped-out]

Congrats on your win Troy.
And congratulations to your son as well..

[Erik D_lux]

Nice job Troy! Way to hold it down!

[ZZR 1100 Racer]

congrats troy!! Great job with the remedy! Couldn't believe you broke the chassies at local comp??? My rig felt down 32ft and nothing brake.

[winnerone23]

Originally Posted by tapped-out

Congrats on your win Troy.
And congratulations to your son as well..

Thank you sir! I'll have to prep Aiden a little better, for next year! The long weekend got to him mid day Saturday..
A good weekend for us!!

Originally Posted by Erik D_lux

Nice job Troy! Way to hold it down!

Thanks Erik! The Superlite's and loaded dice, are holding it down! I'm just the pilot!

Originally Posted by ZZR 1100 Racer

congrats troy!! Great job with the remedy! Couldn't believe you broke the chassies at local comp??? My rig felt down 32ft and nothing brake.

Thanks Stephan! Good to see you posting!
Yeah, it had a tough 2 yrs, buried in some Ridiculous holes. Ready for a couple more years!

[tech54K]

Originally Posted by winnerone23

WHAT!? Wrong section newb... Not for this round! Lol..

Ok, so after meeting Bruce/BDN of BmachineRC at World's, watching the Remedy do work on Stephan's video's, Purp talking Highly of his, etc..
I talked to Bruce and we swapped some measurement's back and forth. Things seemed close enough to make work. The decision was made!

Attachment 316245
Attachment 316246
The shocks needed a little something..
Attachment 316249

So I grabbed for a set of scx shocks, machined pistons, pack of o-rings, mrc silver springs, mini-t front springs, green slime, Losi micro crawler shocks, and built a new set.
Attachment 316250
Attachment 316251

I'm going for something a little different with this build.. A little Bling! (It's all Purp's fault!)

My starting point at this, was picking up some aluminum spring cups and some red springs.. Now only if I could find that second pair of red.. :/
Attachment 316253
Seeing how this chassis has Ridiculous belly clearance, for the first chassis ever, I had to limit my shocks!

So in went a old trick I originally got from Hittman. Micro crawler shock springs, internally...
All 4 shocks are limited to 3.35" extended.. It really brought the chassis into a realistic height at break over..

After the roller was squared away, I started on electronics..
7980, cc bec, HH Br mini's, HH 13t skewed/team 500 puller's and a airtronics MT-4 tx/rx..

Then for some CF... Oh yeah!

Robbob/Krazed Builds, new Berg CF electronics's tray!

Custom Fiber/Me, CF motor guard's and servo guard.
Attachment 316254

Now.. Something different then CF panels.. Think, think, think.. I got it! I know it's around here somewhere.. Where is it... Ahh, there it is!
Attachment 316256

I picked this, RockThrasher painted Lightning McQueen mini bug, up some time ago and have been letting it sit. Not anymore!

After some cutting...

This is a gold mine. Thanks for sharing

[winnerone23]

Just going to drop this off, here..


Sent from my XT1650 using Tapatalk

[xkill]

Congrats!!!

[skypyt]

nice work,

congratulations.

[winnerone23]

Been a bit... 5 years into this truck and the first comp off the year is coming this weekend!!
Headed up to CT, for the Spring Fling!

Guess I better get some electronics smashed and see if my batteries charge! Lol..

Will be updating soon!

Happy crawlering season!!!