Hulksta Berg w/DeLux precision

[Curcal]

BTW this is typical for Berg Build threads!

[blandon]

Originally Posted by Curcal

BTW this is typical for Berg Build threads!

Berg guys just have more fun!!

[blandon]

Originally Posted by mammoth

See look he has Krawler Kev's in his hand at worlds cause he just couldn't help himself!!! Popeye arms for sure!!!

Hmmmm....... What's that other name for a rooster?

[winnerone23]

Originally Posted by blandon

Hmmmm....... What's that other name for a rooster?

Richard?

Purp?

Pecker?

[Postclanker]

Originally Posted by Curcal

BTW this is typical for Berg Build threads!

ya, I gathered that when reading the other threads...I'm just getting warmed up. I have a rooster in my hands every now and then

nice to put a face to a name Troy ...

[noname0383]

Hey pal, i'm a little late on the news... lol... WOW... nice set of Berg axles

I think you'll be very happy with those...

But this new thread missed pics

[Postclanker]

Oh, we got pics....before I read Curcal's and Blandon's thread last night I cut the rest of my shocks down. I have two sets of these now so I didn't feel too bad cutting one set. If you followed any of the XR thread at all you knew I was struggling with my shocks and ride height wth the Hulksta. I have a set of BIgBores at 83 mm and felt like that still wasn't low enough ....on the XR axles that is. Almost every pic I've seen so far has the shock/link mounts right at the hub or locker...wider than the XR axle. Seems that would bring it down more.

Hack sawed them, bevled the edges...internal limited about 6mm

This is how they turned out



Compared to the original



The cell phone distorts your view a bit...it doesn't appear like it's measuring correctly...but that # is pretty accurate



A little longer than I wanted but like I mentioned, I think the width of the mount will compensate for that. Wada you think?

[Postclanker]

Originally Posted by noname0383

Hey pal, i'm a little late on the news... lol... WOW... nice set of Berg axles

I think you'll be very happy with those...

But this new thread missed pics

I'm waiting on the new links....and reading a lot. Always wanted to try these and found a real nice set for sale and couldn't pass them up

Thanks Delbert

Have you figured out your electronics yet Noname?

[EverettY]

Originally Posted by Curcal

^ that has nothing to do with building rigs......

Sounds like 90% of the posts in winner's threads... Have nothing to do with crawlers...

[winnerone23]

Originally Posted by EverettY

Sounds like 90% of the posts in winner's threads... Have nothing to do with crawlers...

That's right kiddo! That's how you know, you have arrived... ;)

Look at Clanker go.. He's 2 days in the Berg section and already 98% BS in his thread and more rep power then you Eve! ;)

[Postclanker]

Lol, hope you guys are civil....
I don't mind the BS...keeps the world turning. I'll throw my feeble tech shit in there from time to time and keep us honest

I really wish vendors would list the shock spring sizes so you know what you're getting instead of "front" and "rear"....give me some numbers ....we're trying to find stuff that fits damnit

[blandon]

Sorry Clanker, one more incriminating pic!! Roksloski, you thought the last one was weird, get a load of this!!!OK, now back to the tech!!

[FLOKI-81]

hmmmmm
TITANIC??

[Postclanker]

lol...I've seen much worse than that....sometimes you question the sexual orientation of some of these guys...

[winnerone23]

I was questioning Bob's that day, when he asked for me to jump behind him for that pic..
But, what the hell! I love the guy!

[Stuck]

Originally Posted by Postclanker

Lol, hope you guys are civil....
I don't mind the BS...keeps the world turning. I'll throw my feeble tech shit in there from time to time and keep us honest

I really wish vendors would list the shock spring sizes so you know what you're getting instead of "front" and "rear"....give me some numbers ....we're trying to find stuff that fits damnit

if your looking for springs for your new short shocks , I would use some Losi Mini T front pinks. The Mini T fronts are short and the rears are long

[winnerone23]

Fronts are short. It's what ppl use on big bores.
Rears are medium length
Mrc Pro silver springs are "long"(it's what I use on my rigs)

I think you would be happy with the Rcbros spring's, for the length.
I can get measurements when I get home tonight.

[Postclanker]

Originally Posted by Stuck

if your looking for springs for your new short shocks , I would use some Losi Mini T front pinks. The Mini T fronts are short and the rears are long

my fronts don't want to go over the threads...they bind up...but the rears work nice...just don't have any soft ones

[Postclanker]

Originally Posted by winnerone23

Fronts are short. It's what ppl use on big bores.
Rears are medium length
Mrc Pro silver springs are "long"(it's what I use on my rigs)

I think you would be happy with the Rcbros spring's, for the length.
I can get measurements when I get home tonight.

aren't RCBros actually Losi Mini-t rears ? sure looked like that...
that's what I mean about sizes...nobody mentions any dimensions at all, sure wish they would...thanks Troy

[Postclanker]

Originally Posted by winnerone23

I was questioning Bob's that day, when he asked for me to jump behind him for that pic..
But, what the hell! I love the guy!

Bob's...or Boob's ?