RCCrawler Forums

House · 01-06-2019, 01:09 PM

The first one was a little excessive.
This is how I did most of them after that.

House · 01-06-2019, 09:39 PM

Such a slow process getting everything to your liking.
And a little time spent on a ghetto fab foam slicer.

WHITE-TRASH · 01-06-2019, 10:05 PM

Fancy! I butcher that shiat by comparison.

House · 01-08-2019, 12:04 AM

More late night fun.
Soooo much fun!

tapped-out · 01-08-2019, 12:11 AM

I can't believe you're going to mount those old skool tires on this rig.
Haven't you heard all the cool kids run voodoo pins.

Sent from my SM-J737V using Tapatalk

House · 01-08-2019, 12:39 AM

Welcome to 2009... errr 2019!

I do have Voodoo pins also, but sometimes you just have to ‘Rover Up’.

Do you remember Wendover in the rain?!?

House · 01-08-2019, 01:57 AM

It never ceases to amaze me at how much rubber
you can pull off of these things. I guess I should have
done a weight comparison...

Almighty Malach · 01-08-2019, 03:38 PM

Does that lump have the black snot rockets in it too?

House · 01-08-2019, 04:00 PM

No, that's why I can't use it to get a proper weight difference.
I would have to come up with a rubber from snot extraction system first...

That's like a whole ball, I kind of want to throw it at something and see what happens!

House · 01-09-2019, 11:55 PM

Alright, I have been doing a lot of research lately and I thinkI am ready
to unveil to the RC world some next level shit... I think this might actually
be something that will garner some interest from the new school hard core
crawler crews that stomp around the internets... Whatcha think? Too raw?
Way ratchet? Too Nite of Forts? Too Book of Faces? Thcale enuf?

WHITE-TRASH · 01-10-2019, 12:46 AM

Nice gayler! Gonna have to move them electronics so you have room for your doll.

Taper · 01-10-2019, 07:14 AM

Quote:

Originally Posted by House

Back to the bent shock rodends,
XR10, RC4WD, SCX10
No scale yet but I think the left two will be close.
My hands tell me the steel one is still heavier...

What brand left rod end?

M3 or M4?

PS

Crazy job!!!

WHITE-TRASH · 01-10-2019, 10:09 AM

Quote:

Originally Posted by Taper

What brand left rod end?

M3 or M4?

PS

Crazy job!!!

Axial. It is 3mm but no problem drilling it for 4mm if needed.

tapped-out · 01-10-2019, 10:59 AM

All the scale accessories look great but It won't be true scale until you have full interior and a driver.

Other then playing dress up have you driven this rig yet?

Sent from my SM-J737V using Tapatalk

Nova's Ark · 01-10-2019, 11:08 AM

Your back ground art is fire homie!

House · 01-10-2019, 11:09 AM

Look closer, there is an ice chest and a dog inside. That's all that matters! HAHA
I am trying to draw outside interest into the real crawler world with bait... Maybe it won't work?
Nobody commented on my scale banners in the "garage" yet, I am sad.
*edit - Thanks Eddie! You posted that while I was typing

No Matt, I haven't driven it. Not even around the house. No available daylight during the week
and weekends have either been too busy or too shitty weather to go outside. Sad, I know.
Most work I have ever put into a dust collector yet...

tapped-out · 01-10-2019, 11:15 AM

I was looking @ those FB sucks sticker thinking I need a few.

Sent from my SM-J737V using Tapatalk

Nova's Ark · 01-10-2019, 11:16 AM

You've got it backwards brotha... you do not come down to the lower minded... you hold your higher position and draw them up... competition rc rock crawling is on a different level... and whether they acknowledge us or not... they wouldn't have any of the current part offerings without us.

Edmundo Ayala
Crawler Innovations

House · 01-10-2019, 11:40 AM

True 'dat brutha..
But if we can't catch a fish with a beautiful hand tied dry fly,
then maybe it's time to stab a nasty old worm with a hook
and see what bites it...

Go rccrawler.com
Go crawlerinnovations.com
#compcrawlingisnotdead

WHITE-TRASH · 01-10-2019, 12:04 PM

Slowly but surely the locals are catching on. We go out most every weekend and I always take my pile of rigs and let anyone drive anything they want. Well anything but the exo and bomber, they'd destroy them.

By allowing them to drive something that doesn't suck and can actually perform they are realizing their stuff pretty much needs fully rebuilt but I'm helping them fix their setups and get the right parts together. If I'm not careful we will have a few more sportsman rigs running around here this summer.

I didn't see the dog but I did notice the bed roll in the back. My only concern isnt for the pro 0laying dress up but for the fact that you have such things in the first place...

01-06-2019, 01:09 PM	#181
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter The first one was a little excessive. This is how I did most of them after that. Attached Images

01-06-2019, 09:39 PM	#182
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter Such a slow process getting everything to your liking. And a little time spent on a ghetto fab foam slicer. Attached Images

01-06-2019, 10:05 PM	#183
WHITE-TRASH I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA Posts: 4,831	Re: House’s TiDe Fighter Fancy! I butcher that shiat by comparison.

01-08-2019, 12:04 AM	#184
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter More late night fun. Soooo much fun! Attached Images

01-08-2019, 12:11 AM	#185
tapped-out I wanna be Dave Join Date: Dec 2006 Location: here Posts: 3,042	Re: House’s Alumi-Fighter Bounty Hunter I can't believe you're going to mount those old skool tires on this rig. Haven't you heard all the cool kids run voodoo pins. Sent from my SM-J737V using Tapatalk

01-08-2019, 12:39 AM	#186
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter Welcome to 2009... errr 2019! I do have Voodoo pins also, but sometimes you just have to ‘Rover Up’. Do you remember Wendover in the rain?!?

01-08-2019, 01:57 AM	#187
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter It never ceases to amaze me at how much rubber you can pull off of these things. I guess I should have done a weight comparison... Attached Images

01-08-2019, 03:38 PM	#188
Almighty Malach RCC Addict Join Date: Feb 2008 Location: Crawlerado Posts: 1,411	Re: House’s TiDe Fighter Does that lump have the black snot rockets in it too?

01-08-2019, 04:00 PM	#189
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter No, that's why I can't use it to get a proper weight difference. I would have to come up with a rubber from snot extraction system first... That's like a whole ball, I kind of want to throw it at something and see what happens!

01-09-2019, 11:55 PM	#190
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter Alright, I have been doing a lot of research lately and I thinkI am ready to unveil to the RC world some next level shit... I think this might actually be something that will garner some interest from the new school hard core crawler crews that stomp around the internets... Whatcha think? Too raw? Way ratchet? Too Nite of Forts? Too Book of Faces? Thcale enuf? Attached Images

01-10-2019, 12:46 AM	#191
WHITE-TRASH I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA Posts: 4,831	Re: House’s TiDe Fighter Nice gayler! Gonna have to move them electronics so you have room for your doll.

01-10-2019, 10:59 AM	#194
tapped-out I wanna be Dave Join Date: Dec 2006 Location: here Posts: 3,042	Re: House’s Alumi-Fighter Bounty Hunter All the scale accessories look great but It won't be true scale until you have full interior and a driver. Other then playing dress up have you driven this rig yet? Sent from my SM-J737V using Tapatalk

01-10-2019, 11:08 AM	#195
Nova's Ark Tire&Foam Extraordinaire Join Date: Jun 2007 Location: C.I. Compound, Tyler, Texas Posts: 5,592	Re: House’s TiDe Fighter Your back ground art is fire homie!

01-10-2019, 11:09 AM	#196
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter Look closer, there is an ice chest and a dog inside. That's all that matters! HAHA I am trying to draw outside interest into the real crawler world with bait... Maybe it won't work? Nobody commented on my scale banners in the "garage" yet, I am sad. *edit - Thanks Eddie! You posted that while I was typing No Matt, I haven't driven it. Not even around the house. No available daylight during the week and weekends have either been too busy or too shitty weather to go outside. Sad, I know. Most work I have ever put into a dust collector yet...

01-10-2019, 11:15 AM	#197
tapped-out I wanna be Dave Join Date: Dec 2006 Location: here Posts: 3,042	Re: House’s Alumi-Fighter Bounty Hunter I was looking @ those FB sucks sticker thinking I need a few. Sent from my SM-J737V using Tapatalk

Sponsored Links

House’s TiDe Fighter - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Project Tide Me Over	nickrohde121	Axial SCX-10	5	10-09-2014 11:57 AM
roll tide	larimorej	Alabama	3	01-10-2012 08:55 PM
Crimson Tide Theme 1950's Pick Up	nascarkeith	Paint and Body	2	02-14-2010 03:32 PM
Rooooll Tide Roll	hardhead	Chit Chat	4	09-01-2008 07:35 PM
Building a AX10 at the beach when the tide is out.	lilskip	Axial AX-10 Scorpion	18	04-13-2008 09:45 AM

01-10-2019, 11:16 AM	#198
Nova's Ark Tire&Foam Extraordinaire Join Date: Jun 2007 Location: C.I. Compound, Tyler, Texas Posts: 5,592	Re: House’s TiDe Fighter You've got it backwards brotha... you do not come down to the lower minded... you hold your higher position and draw them up... competition rc rock crawling is on a different level... and whether they acknowledge us or not... they wouldn't have any of the current part offerings without us. Edmundo Ayala Crawler Innovations

01-10-2019, 11:40 AM	#199
House RCC Addict Join Date: Mar 2009 Location: The REAL Nor-Cal Posts: 1,049	Re: House’s TiDe Fighter True 'dat brutha.. But if we can't catch a fish with a beautiful hand tied dry fly, then maybe it's time to stab a nasty old worm with a hook and see what bites it... Go rccrawler.com Go crawlerinnovations.com #compcrawlingisnotdead

01-10-2019, 12:04 PM	#200
WHITE-TRASH I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA Posts: 4,831	Re: House’s TiDe Fighter Slowly but surely the locals are catching on. We go out most every weekend and I always take my pile of rigs and let anyone drive anything they want. Well anything but the exo and bomber, they'd destroy them. By allowing them to drive something that doesn't suck and can actually perform they are realizing their stuff pretty much needs fully rebuilt but I'm helping them fix their setups and get the right parts together. If I'm not careful we will have a few more sportsman rigs running around here this summer. I didn't see the dog but I did notice the bed roll in the back. My only concern isnt for the pro 0laying dress up but for the fact that you have such things in the first place...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler Forums

Thread: House’s TiDe Fighter