http://www.rccrawler.com/forum/ en Tue, 21 May 2013 19:07:02 GMT vBulletin 60 http://www.rccrawler.com/forum/images/misc/rss.jpg http://www.rccrawler.com/forum/ http://www.rccrawler.com/forum/axial-scx-10/445657-new-axles.html Tue, 21 May 2013 17:18:33 GMT What are your guys thoughts on the integy aluminum type 2 axles? I've been looking at the vanquish currie axles but they are alittle more money why do you guys say?"thumbsup" ]]> Axial SCX-10 CrawlinOnAbudget http://www.rccrawler.com/forum/axial-scx-10/445657-new-axles.html http://www.rccrawler.com/forum/axial-scx-10/445578-jeep-yj-3-a.html Tue, 21 May 2013 03:36:27 GMT This will be my 3rd YJ build. I've loved this every since my uncle bought one and I was the first to go along for a ride. I'll try to keep this build up to date and a bit more informative.

Parts list:
All metal tranny minus case
GCM t-case, servo mount, tranny mount
Yota axles
Axial chassis
Interior byAirship on scale4x4






I'm waiting on some parts so I can finish the leaf springs and then I'll move on to interior and electronics. ]]> Axial SCX-10 xigtc http://www.rccrawler.com/forum/axial-scx-10/445578-jeep-yj-3-a.html http://www.rccrawler.com/forum/axial-scx-10/445496-few-questions.html Mon, 20 May 2013 18:20:45 GMT Hi everyone, I am looking into buying a SCX (Either Honcho or Dingo). I do not know which one I should get. I would like a kit but I do not like the Dingo body/short wheelbase. So I guess ill get a Honcho and remove the electronics... Will this setup work? Motor and ESC: TowerHobbies.com... Hi everyone,

I am looking into buying a SCX (Either Honcho or Dingo). I do not know which one I should get. I would like a kit but I do not like the Dingo body/short wheelbase. So I guess ill get a Honcho and remove the electronics...

Will this setup work?
Motor and ESC:
TowerHobbies.com | Castle Creations 1/10 SV3 Sidewinder WP 4600kV System
Servo:
Savox Servos, Savox SC-1256TG Standard Digital High Torque Titanium Gear Servo - A Main Hobbies - A Main Hobbies
TX:
Spektrum DX4S DSMR 4-Channel Surface Radio w/Telemetry [SPM4000] | Radios & Accessories - A Main Hobbies
And all powered by:
Traxxas 3S "Power Cell" 25C Li-Poly Battery w/Traxxas Connector (11.1V/3300mAh) [TRA2846] | RC Cars & Trucks - A Main Hobbies

I really wish the SCX Honcho kit was still around..:cry:

Thanks in advance.

Pgz ]]> Axial SCX-10 Penguinz http://www.rccrawler.com/forum/axial-scx-10/445496-few-questions.html http://www.rccrawler.com/forum/axial-scx-10/445445-scales-scx-10-a.html Mon, 20 May 2013 07:22:32 GMT Far from new but new to me, had 2.2's and the front bar cut with winch when I got it.
I put the original wheels/tires on trimmed the hole in the front bar just to tidy it up, re-attached the winch line properly, added a bec and savox servo, removed the lights, lowered the battery tray and moved the elec's around a bit by adding a tray in the rear, trimmed and flipped the rock sliders on the sides and removed a bit of the body and cage under the back for clearance of the elec's.

]]> Axial SCX-10 Scales http://www.rccrawler.com/forum/axial-scx-10/445445-scales-scx-10-a.html http://www.rccrawler.com/forum/axial-scx-10/445413-class-2-tire-question.html Mon, 20 May 2013 02:56:02 GMT Does anybody know of a 2.2 scale legal tire that is 4.75 or smaller tall? Does anybody know of a 2.2 scale legal tire that is 4.75 or smaller tall? ]]> Axial SCX-10 509hooligan http://www.rccrawler.com/forum/axial-scx-10/445413-class-2-tire-question.html http://www.rccrawler.com/forum/axial-scx-10/445386-new-red-jeep-wrangler-rubicon-%2Apic-heavy%2A.html Mon, 20 May 2013 00:28:27 GMT Hey guys it's been a while in the making.. But I am almost finished!

After having the problem of not being noted that the body had "Overspray Film" I lost some decals in the process..
But Axial was awesome and sent me some so I could redo it the right way! thanks AXIAL :)

Decided to go with red with the black top because I really loved the look of the Jeep on the Axial box.

Still need to add a few things

- Door hinge stickers
- Door handles
- Hood Rubicon decals
- Hard top
- Windshield
- Roof Rack
- Rear running lights
- Lighted dashboard and GPS

Let me know what you guys think or if you have any ideas :) Thanks!









]]> Axial SCX-10 AvriX http://www.rccrawler.com/forum/axial-scx-10/445386-new-red-jeep-wrangler-rubicon-%2Apic-heavy%2A.html http://www.rccrawler.com/forum/axial-scx-10/445365-honcho.html Sun, 19 May 2013 22:39:43 GMT I'm new to rc crawlers...I bought a used honcho and was want a new speed control and motor combo. What do y'all recommend? ]]> Axial SCX-10 germ http://www.rccrawler.com/forum/axial-scx-10/445365-honcho.html http://www.rccrawler.com/forum/axial-scx-10/445328-steel-slipper-hub-anyone-seen-one.html Sun, 19 May 2013 17:16:18 GMT i have a hardened steel one piece slipper hub that the spur gear bolts too on my scx10 was wondering if anyone knows where they came from or who sells them i have a hardened steel one piece slipper hub that the spur gear bolts too on my scx10 was wondering if anyone knows where they came from or who sells them ]]> Axial SCX-10 Billadelphia http://www.rccrawler.com/forum/axial-scx-10/445328-steel-slipper-hub-anyone-seen-one.html http://www.rccrawler.com/forum/axial-scx-10/445317-restless-rubi-jk.html Sun, 19 May 2013 14:33:15 GMT Time to start another build with anothe chassis another body and of course a lot of VP parts slowly rolling in. Here is the body so far since lastnight. Image: http://i1057.photobucket.com/albums/t400/86ranged/D57D825A-9D7D-4C5A-8D35-2EB692715CE5-270-000000BB480799BA.jpg Image:... Time to start another build with anothe chassis another body and of course a lot of VP parts slowly rolling in. Here is the body so far since lastnight.










]]> Axial SCX-10 bagged86 http://www.rccrawler.com/forum/axial-scx-10/445317-restless-rubi-jk.html http://www.rccrawler.com/forum/axial-scx-10/445308-please-help-steering-servo-hits-everything.html Sun, 19 May 2013 08:23:31 GMT Hello all,

I'm new to the crawler scene and can't wait to get my new SCX10 Rubicon up and running.....having serious (at least "I" think it's serious) clearance issues with the Hitec 645 servo. I have it mounted on the axle as the instructions say and the first thing I noticed was the servo arm hitting the crossmember. I've searched all the forums and looks like this is a common problem so I shaved the mounts to move the servo back. This is good now BUT I noticed that I can only get about half suspension travel when the axle is articulated on the driver side....with the left side of axle pushed up and the wheels turned left, the top steering rod hits the frame with only half travel!!!!! I didn't see anything in the forums about this problem. The front drive shaft also hits the y-brace with the front left axle pushed up.....is this normal? Everything's built the way the book says...super easy! Just don't understand why there's so much interference up front especially with the axle articulated (left up) as everything hits????

Thanks all for any help! ]]> Axial SCX-10 XFITCRAWLER http://www.rccrawler.com/forum/axial-scx-10/445308-please-help-steering-servo-hits-everything.html http://www.rccrawler.com/forum/axial-scx-10/445276-mip-driveshafts.html Sun, 19 May 2013 01:16:23 GMT As the title states which MIP driveshafts do people use on the axial jeep rubicon limited kits ? MIP say that part # 10145 is not for the rubicon editions. So what do I use ? As the title states which MIP driveshafts do people use on the axial jeep rubicon limited kits ?
MIP say that part # 10145 is not for the rubicon editions.
So what do I use ? ]]> Axial SCX-10 patrol king http://www.rccrawler.com/forum/axial-scx-10/445276-mip-driveshafts.html http://www.rccrawler.com/forum/axial-scx-10/445242-scalers-2-door-rubicon-build.html Sat, 18 May 2013 21:05:16 GMT So I have had the rig for a while now so thought I'd post a build thread:

As of now it has:
Proline Rubicon 2 door body
Dingo interior
1.9 flatirons
1.9 axial beadlocks (black)
55t axial motor (soon to be changed if I don't like how it performs)
20t pinion
87t spur
RC4WD wireless winch
Headlights, rock lights, tail lights
Axial jk front and rear bumpers
Hitec 5955 servo
Aluminum servo horn
Wraith lower links
Dinky scale accesories
Crawler innovations accesories
Proline accesories
Custom bungee straps
Custom CB radio antenna


Future upgrades:
Tranny gears
Links (lowers, uppers, steering)
Knuckles
C hubs
Fast Eddy bearings


This may be a boring build but I'm 14 and don't have a steady income. So it'll be on budget.

Here are some pics!

Mobile Photobucket

Mobile Photobucket

Mobile Photobucket

Mobile Photobucket

Mobile Photobucket

Sorry about the photo bucket pictures, and some photos aren't up to date. But here y'all go! Thanks guys! ]]> Axial SCX-10 SCALER14 http://www.rccrawler.com/forum/axial-scx-10/445242-scalers-2-door-rubicon-build.html http://www.rccrawler.com/forum/axial-scx-10/445235-need-know-where-i-can-order-axial-parts.html Sat, 18 May 2013 20:09:55 GMT I just bought a used axial scx10 and would like to get some good electronics for it and find some decent green aluminum parts for my Cherokee crawler any help would be great. I just bought a used axial scx10 and would like to get some good electronics for it and find some decent green aluminum parts for my Cherokee crawler any help would be great. ]]> Axial SCX-10 Bane87 http://www.rccrawler.com/forum/axial-scx-10/445235-need-know-where-i-can-order-axial-parts.html http://www.rccrawler.com/forum/axial-scx-10/445190-new-guy-scratch-built-crawler.html Sat, 18 May 2013 04:35:02 GMT Hey all...fairly new to the crawler world but had rc's all my life. I have a couple honchos, I have made all high clearance links and shock brackets for more travel. I was running out of things to do so I thought why not try to build a steel chassis from scratch and try my hand at styrene for some body panels.......I am gonna change a few things but here are a couple pics just to give ya an idea. I plan to make it a complete chassis and just bolt the running gear and what not onto it...............Let me know what ya think





]]> Axial SCX-10 DonnieB http://www.rccrawler.com/forum/axial-scx-10/445190-new-guy-scratch-built-crawler.html http://www.rccrawler.com/forum/axial-scx-10/445185-vanquish-currie-axles-loss-wheel-speed.html Sat, 18 May 2013 03:43:42 GMT As the title says I finally got around to installing the Vanquish Currie axles in the scx10 today. I put them together as Vanquish said. everything is new inside. went together great, finally got it on the rocks and man I have lost wheel speed when trying to climb over something, to the point that... As the title says I finally got around to installing the Vanquish Currie axles in the scx10 today. I put them together as Vanquish said. everything is new inside. went together great, finally got it on the rocks and man I have lost wheel speed when trying to climb over something, to the point that if its steep and im flex'd I cant even get the wheels to spin. the axles seem to spin easy to me by hand before I installed them. electronics are Tekin FXR, castle BEC, Savox servo, Tekin 35 turn pro motor. Tires are lightly weighted RC4WD swampers and Vanquish OMF wheels. it had plenty of wheel speed and spin off bafore I put these in. Did I do something wrong? maybe something that I cant think that is tight? I reset the FXR and even swapped to Tekin 55 turn and Im getting the same thing. when I was free spinning them before I installed them they felt fine but I should have the same amount of power from as before.

thanks for any input:cry: ]]> Axial SCX-10 OGXXXOG http://www.rccrawler.com/forum/axial-scx-10/445185-vanquish-currie-axles-loss-wheel-speed.html