http://www.rccrawler.com/forum/ How to get the traction to the ground! en Sat, 18 May 2013 21:11:51 GMT vBulletin 60 http://www.rccrawler.com/forum/images/misc/rss.jpg http://www.rccrawler.com/forum/ http://www.rccrawler.com/forum/tires-wheels/445201-best-place-buy-alloy-beadlocks-online.html Sat, 18 May 2013 07:43:42 GMT hi been in New Zealand I have to buy everything on line from the states pretty much and have seen some pretty cool alloy beadlock wheels but the likes of them aren't listed on ebay or the likes and even rc4wd doesn't seem to have much listed really so anyone able to point me to site that will ship overseas would be great. thanks ]]> Tires and Wheels skidtoy http://www.rccrawler.com/forum/tires-wheels/445201-best-place-buy-alloy-beadlocks-online.html http://www.rccrawler.com/forum/tires-wheels/445139-single-axial-1-9-beadlock.html Fri, 17 May 2013 21:27:37 GMT anyone know where i can buy a single axial 1.9 beadlock wheel?i wanting to put some on my scx10 but i need 5. one for the spare tire carrier. dont really wanna buy an extra set of 2 if i dont have to. thanks anyone know where i can buy a single axial 1.9 beadlock wheel?i wanting to put some on my scx10 but i need 5. one for the spare tire carrier. dont really wanna buy an extra set of 2 if i dont have to. thanks ]]> Tires and Wheels SCWrangler http://www.rccrawler.com/forum/tires-wheels/445139-single-axial-1-9-beadlock.html http://www.rccrawler.com/forum/tires-wheels/445056-2-8-wheels.html Fri, 17 May 2013 03:40:48 GMT Hi there, I am looking for a wheel to mount my 2.8 Badlands on a set of wheels with the largest backspacing. I know this forum usually deals with 2.2 and 1.9 wheels but..... I am trying to widen my rear wheelbase as much as I can without going to spacers. I thought I needed a 2.2 but I was wrong.... Hi there,
I am looking for a wheel to mount my 2.8 Badlands on a set of wheels with the largest backspacing. I know this forum usually deals with 2.2 and 1.9 wheels but..... I am trying to widen my rear wheelbase as much as I can without going to spacers. I thought I needed a 2.2 but I was wrong.
Thanks! ]]> Tires and Wheels Stan3535 http://www.rccrawler.com/forum/tires-wheels/445056-2-8-wheels.html http://www.rccrawler.com/forum/tires-wheels/444964-voodoo-mold-information.html Thu, 16 May 2013 15:24:48 GMT B on both sides of the...]]> The mold is being corrected. As many of you have correctly noted, the directional indicators are not correct on one side of the tire. Our original CAD file was correct but the final factory tool path for the mold was taken from one side of the file.
Right now it reads A<>B on both sides of the tire. The new set up will be A<>B one one side and B<>A on the other side.

This was our original CAD file:

]]> Tires and Wheels crawl-o-matic http://www.rccrawler.com/forum/tires-wheels/444964-voodoo-mold-information.html http://www.rccrawler.com/forum/tires-wheels/444685-tire-trimming-pullers.html Tue, 14 May 2013 18:00:48 GMT I have been searching for some time and cannot find a definitive answer or how to. anyone know what the best way is to trim the TLT tires for this result: Image: http://www.5280rcpullingclub.com/eventpics/Termyte/34.JPG im guessing a new razor blade or a dremel with a sanding drum.... just... I have been searching for some time and cannot find a definitive answer or how to.

anyone know what the best way is to trim the TLT tires for this result:


im guessing a new razor blade or a dremel with a sanding drum.... just wanted to see if anyone herre has a better idea.

]]> Tires and Wheels TwistedXT http://www.rccrawler.com/forum/tires-wheels/444685-tire-trimming-pullers.html http://www.rccrawler.com/forum/tires-wheels/444648-do-these-work.html Tue, 14 May 2013 14:27:06 GMT I'm looking around to learn about sidewall support for the 1.9 iRok Super Swamper tire. I have them mounted on Axial 8Hole bead locks and have them on a Twin Hammer. The tire stands kinda tall and has really soft sidewalls. The tire is great on rock, roots, dirt and crawls well, but when I wanna bash a little and let the hammer run, the sidewalls give while cornering.

My question is.. will these help...

Crawler Innovations closed cell tuning disc? ]]> Tires and Wheels ntruder http://www.rccrawler.com/forum/tires-wheels/444648-do-these-work.html http://www.rccrawler.com/forum/tires-wheels/444512-what-some-good-tires-run-ridgcrest.html Mon, 13 May 2013 21:45:54 GMT so i picked up a stock ridgcrest on a barter not to long ago, must say i got the better end of the barter. and i have the stock ripsaw tires on it with some of the lugs cut out as per benders writeup on axials website and im kinda dissapointed on how they hook up. i mean dont get me wrong they work... so i picked up a stock ridgcrest on a barter not to long ago, must say i got the better end of the barter. and i have the stock ripsaw tires on it with some of the lugs cut out as per benders writeup on axials website and im kinda dissapointed on how they hook up. i mean dont get me wrong they work good in sharper jagged rocks but most the stuff i have around my area is kinda smoother rock with loose gravel or dirt mixed in. im pretty new to the crawling stuff and was wondering if anyone could point me in a better tire direction. im looking for something that will handle a lil better in smoother rocks and loose rock/gravel. any input will be appreciated. ]]> Tires and Wheels jboehler04 http://www.rccrawler.com/forum/tires-wheels/444512-what-some-good-tires-run-ridgcrest.html http://www.rccrawler.com/forum/tires-wheels/444377-vaterra-race-claws.html Mon, 13 May 2013 02:08:29 GMT I've been using the Vaterra Race Claw that comes on the Twin Hammers. I use them on an Axial beadlock on my SCX10. I've been quite pleased with them so far. I thought they were gonna be a little stiff at first but they have softened with use and are awesome, especially for $16 a pair! haha.

I use them in this video (although them by another incorrect name. oops)

RC Trail Trucks on the Rocks, and In the River. - YouTube ]]> Tires and Wheels Timbulb http://www.rccrawler.com/forum/tires-wheels/444377-vaterra-race-claws.html http://www.rccrawler.com/forum/tires-wheels/444287-1-9-mickey-thompson-ttc-vs-pitbull-rock-beasts.html Sun, 12 May 2013 14:04:49 GMT Im currently running the 1.9 Mickey Thompson ttc's on my 12lb honcho, they're a great tire for all around. I just ordered a set of pitbull rock beasts, has anyone ran the comparison on these? ]]> Tires and Wheels SctraX10 http://www.rccrawler.com/forum/tires-wheels/444287-1-9-mickey-thompson-ttc-vs-pitbull-rock-beasts.html http://www.rccrawler.com/forum/tires-wheels/444094-tall-comp-tire-vs-shorter-comp-tire.html Sat, 11 May 2013 01:47:05 GMT Here is a place for open discussion on the effects, positive or negative, on running taller or shorter comp tires!!! Here is a place for open discussion on the effects, positive or negative, on running taller or shorter comp tires!!! ]]> Tires and Wheels Tgreer http://www.rccrawler.com/forum/tires-wheels/444094-tall-comp-tire-vs-shorter-comp-tire.html http://www.rccrawler.com/forum/tires-wheels/444063-storage-how-does-everyone-do.html Fri, 10 May 2013 22:05:56 GMT Okay,

I', flipping through boxes and boxes of parts on my new build, + my super scale build (which looks like may never happern with the Axial Wraith Wrangler and Twin Hammers out). But back on track. SO I got about 20 plastic cases with compartment dividers for ball ends, link ends differernt rods misc parts both usefull and scale all over my shop. The I got about 5 Larger lided divider boxes for servos's ESC's Motors etcs.

Then I have 1 bight no telling how many quart container for rims/wheels and rims and wheels.

I'm doing some cleaning and trashing some stuf and I start to get more and more disgusted about the state of all my tires. Now I am talking mounted ones. Short Course, Stadium and Crawler. from 1.5 to 2.2.

Where and how can I store them, When and how can I store them and be able to take spares to test on different terrians? I got nothin. I parused thrugh the local HD and Lowes looked around other places And I still see nothing.

SO what do people do? I know every builder on this bord has tires and wheels comming out the yang, Someone most have some nice way or idea to store and trasport what they want or need?

I say this as I am thinking off 5 sets of 1.9, 3 sets of 1.5's and then about 5 sets of 2.2 and then 10+ sets of 2.2-3.0 and 2.0-3.0.

Whats man to do?

Dave ]]> Tires and Wheels DaveFL http://www.rccrawler.com/forum/tires-wheels/444063-storage-how-does-everyone-do.html http://www.rccrawler.com/forum/tires-wheels/443938-biggest-2-2-scale-tire.html Fri, 10 May 2013 00:49:40 GMT Which one is the tallest? Sent from my VS840 4G using Tapatalk 2 Which one is the tallest?


Sent from my VS840 4G using Tapatalk 2 ]]> Tires and Wheels parker88 http://www.rccrawler.com/forum/tires-wheels/443938-biggest-2-2-scale-tire.html http://www.rccrawler.com/forum/tires-wheels/443833-best-all-around-1-9-tire.html Thu, 09 May 2013 15:52:03 GMT I'm looking for the best all around tire for hill climbing, trailing, and bashing. I just got the iROC Super Swamper last weekend. I like the grip they have and it's an awesome looking tread. The only thing I don't like is they stand really tall and make my hammer look cartoonish. Would a stiffer foam work better so tha tthe side walls don't just roll over and cause the truck to flip on turns. I can manage to keep all 4 wheels on the ground while cornering with throttle control.

I looked at the pitbull 1.9 rock beast and they look sweet... they are shorter than the iROC's and have a nice tread mattern... are these recomended as a "All purpose" tire? and do they mount well on the Axial 8Hole beadlocks? ]]> Tires and Wheels ntruder http://www.rccrawler.com/forum/tires-wheels/443833-best-all-around-1-9-tire.html http://www.rccrawler.com/forum/tires-wheels/443802-jeep-jk-1-9-wheels.html Thu, 09 May 2013 08:44:41 GMT I just ordered my set from RC4WD.com! They are back in-stock! Anyone else got these wheels? pics? I just ordered my set from RC4WD.com! They are back in-stock!

Anyone else got these wheels? pics? ]]> Tires and Wheels AvriX http://www.rccrawler.com/forum/tires-wheels/443802-jeep-jk-1-9-wheels.html http://www.rccrawler.com/forum/tires-wheels/443789-taking-color-off-axial-bead-lock-rings.html Thu, 09 May 2013 04:41:02 GMT I have a set if the axial beadlocks that have the green rings on them what is the best way to take the green off of them? will oven cleaner work? I have a set if the axial beadlocks that have the green rings on them what is the best way to take the green off of them? will oven cleaner work? ]]> Tires and Wheels champ198 http://www.rccrawler.com/forum/tires-wheels/443789-taking-color-off-axial-bead-lock-rings.html