You killed it that day you were in the zone, and then your ballon poped lololol.

hope you mean me, if so, thanks. trying to get more comfortable with the remote.

No I mean myself lolol offcourse you :mrgreen:"thumbsup"

I'm all ready to crawl and its only wednesday. I think I have a problem.:lmao: Whose gonna win this time? I think I going for a threepete of 3rd.:roll:

If not me then Rich "thumbsup" But I am do, I have not had one in a while. Plenty of podiums, no wins since summer.

Oh boy looks like everyone is gunning for the number 1 spot.

that's what we do!!:twisted:

You guys are too funny lolol

I think its my turn"thumbsup" Gonna come with a new truck, and a win right out of the gate:flipoff:

a dogfight
 

that a boy"thumbsup"..now all you gotta do is back it up;-) .......what!!!!!!!!!!!

don't lie you know you want it
 

getting ready early is not a problem!!! not trying to win is:lmao: so if that all you want is a 3rd than:flipoff: i need solders:twisted: you fuggers. thanks for that word dickyt....

Boy there is sure alot of sh*t talking going on this week. I hope i dont get any on my tires at the comp sunday:flipoff:

Mr Garrett is the co-king of shit talk, the bad part is he can back it up most of the time :lmao:

That being said, I did spend 14 hours tuning over 2 days at NPB last weekend :twisted: It's on boys :flipoff:

[QUOTE=DickyT;2773920]Mr Garrett is the co-king of shit talk, the bad part is he can back it up most of the time :lmao:

That being said, I did spend 14 hours tuning over 2 days at NPB last weekend :twisted: It's on boys :flipoff:[/QUOTE wow that's some drive time:shock: that's what im talking about 14hrs"thumbsup" i not talk no shit!!:lmao:

Wouldn't that be considered prerunning?:flipoff: I think we need to get an official ruling on this?:lmao::lmao:

Dam Dicky thats alot of foam tuning so any out come??? you find what you wanted?

:flipoff:

Yes sir! I now have a set of "miramar foams", and a set of general high grip foams (npb and others) set aside. Now to find some low grip rock......

Very nice!! Looking foward to seeing the diffrence.

I'll be there Sunday, but my shot at a win is greatly diminished. After getting motors full of sand last weekend the comms are in desperate need of a turn. I could not order my lathe until this morning do to finances so I will be driving on very tired motors.

Oh, oh is this the start of excuses??? lololololol

What lathe did you pick-up?

I picked up this off of ebay new in box for $90: http://www.integy.com/st_prod.html?p...621&p_catid=26

Not the best but fit my budget and will get the job done.

I'm going to get some motor cleaner and comm drops today to try and make it at least drivable for Sunday. The front motor stalls out in even the mildest of binds (trying to roll up an undecut) right now. And does not kick in until about 1/2 throttle.

With no proportional to compensate it makes it difficult to drive ;-)

Do not use Comm Drops on these motors they go to slow to have any benefit & may even gum up the brushes & Comm slots.

Thanks for the tip Donnie, just some motor cleaner then "thumbsup"

If I can find a comm stick is it safe to use to aid in the cleaning?

Im surprised he waited till Fri to start with the excuses:flipoff::flipoff:

You like my dig needs to be re soldered after last nights wire breakage and rig is completely undrivable at this moment better? :flipoff:

Oh no, Mr. Bill.... has just talked himself out of tuning tips, hope ya got all you needed last night :lmao:

Come on brother, thats not cool:shock: I just sent you a PM with more questions, dont leave me hanging:cry:

10$ a motor new springs brushes magnets zapped :mrgreen:you cant go wrong here http://teambrood.com/catalog/product...roducts_id=124

If the Comm is not houred glassed )( you can use the stick to clean the Comm & use the kurnled rounded end of a hobby knife to clean the brushes glazed face & to take the sharp edges off.

Warricks has no electric motor cleaner:evil:

Time to hit up the autoparts stores and see if they have any electric motor safe cleaner.

Edit: nevermind, they had it, just not labeled as such. Directions mention endbells and comms though.

Thanks for the info Donnie, I'll dig around for my old comm stick tonight. The comm is not concave, just filthy from the motor getting filled with sand.

Now that I'm into crawling I wish I had never sold my cobra motor builders lathe I used back in the day on 19t mods.

Very nice "thumbsup"

I love my Cobra "thumbsup"

man i cant watch.....
 

mini can you help dickyt out this one time?:x would hate to see a brotha have a problem in a comp over a simple fix:ror:...+ we need rich at 100.."thumbsup"

I told I would do both motors for $25 I think thats fare. It's the same thing I charged you and your motors worked perfect after...

Anyone that needs the comms turned thats what I charge I gotta pay for my diamond cutters.

if you did em both for 10$ this would be fair:roll: but i got lucky got a cobra pro comm for 10$ the 20$ carbon bit is on the way:x or else i would let him use mine"thumbsup"

Diamond bits cost, it's cool though thats the same reason why I bought a lathe, and thats the reason you got one and now Dicky is getting one so it's worth getting one. I think it's cheap what I charge I know a guy who does motors for $35 each so $25 for both is pretty chill. But any who, tommrow is the big day hope everyone is ready.

I know I am!"thumbsup" Ready to win that is. You gonna show up Mini?

Gotta play it by ear or should i say alarm clock not looking foward to the hour drive but am packed batteries charged and ready to go.

Dont forget your RADIO:lmao:

Another great day for rock crawling!! Congrats to Mini for the win"thumbsup" The courses were stupid sick as usual"thumbsup" Nice changes to the track John.

had a hellova time to day. great driving mini, dicyt, richardgarrett, gst(graham)and billj for making the finals. here are the results on the day
mini 63
rjchardgarrett 75
gst 83
dicyt 109
billj 120
stelerzman 139
rocky666 166
tydl 168
mo 214
rick 224
thanks mini for coming up an comping with us? what did you think?
ill get some pics up soon, and will work on the vid's up asap.