NewRed Hobbies January 30 www.newredhobbies.com For directions or any other info.... January 30 3 Trucks per-person. $12.00 for the first truck $8.00 for the second truck. third truck 5.00..... Gate's open at 8:00 am First event will be show n' shine at 10:00 am Driver's MEETING..... 10:20 am first event depending on how many entry's will be running two class's at the same time.... Classes will be........( you get your class at sign up after your rig is looked over ) 2.2 MOA Usrcca rule will apply 2.2 Shafty 2.2 Scaler Sorrca rules will apply 1.9 scaler OPEN MOD Run What you Brung...Must look Scale/or tube chassis, half chassis Any Chassis, Motor, ESC, Rear steer, Tire Size, axles set(no moa), tranny, no weight limit........Run what you brung...... you will be judged on a comp level in all events and Classes( to make you better drivers..... you will have to bring your ride to tech and get weight in and looked over Events will be MUD BOGG, HILL CLIMB, SLED PULLS, AND CHALLANGE CHOURSE All event count no section will be dropped and you will be judged accordingly....... RULES : : All trucks must go to tech at REGISTRATION if you are competing Challange chourse : during this event you will be judged on time and performance, All COMP rule's will apply. Sled Pulls : Truck weight limit is what you weight in at tech..... No snatching of the sled, solid pull, when you stop your done.... MUD BOGG : Striaght run there will be out of bound marker if hit that is where you stop.... (Speed is your friend here) Hill climb : Markers will be up and they count........ Crawlers will run 3 course's 2 short 1 long if you have any qustions please call me 352-572-6387 or post them or pm.. me.... |
Are you ever just going to have fun gtg's and not always a competition? |
Is there going to be mud? I need to no so i can setup my truck for water or not thanks Charles"thumbsup" |
Quote:
and i thought you were gonna split up the "comps"..... so there would be no bitching and moaning from the bitching and moaners...:roll: |
I'll make sure to have mine on display for all to see so there will be no hear-say afterwards, even thouh it was all BS last time. ;-) |
scatman you running 2.2 on the jeep? |
Yeah but am trying to build a clone to it to run 1.9 with. It goes like stink with 1.9's(used to run it with 1.9's) so I know how it will perform. "thumbsup" Probably gonna drop running the comp rig to concentrate more on the scalers. :twisted::twisted::twisted::twisted: Gonna start taking it serious. :ror: |
Quote:
|
Quote:
I didn't piss and moan, I called people out on BS. ;-) Fine line between winning and whining. |
I'm in. Are you still going to run the ttc format? I will have to bring a scaler so i don't miss out on the drama, gotta love the he said she said .........:mrgreen: |
I might bring my shafty back out. Hopefully I can redeem myself for the crappy run on the rocks (that second gate was pure evil) |
1 Attachment(s) I wonder if it will look like this again. lol :lmao::lmao::lmao::lmao::lmao::lmao: Im not whining Attachment 151809 I might boost my scalers performance with different color beedlock rings..... And oh yeah, the 32 turn motor I wound:shock::shock: |
I wonder how a 19 turn handwound would do on 6S lipo? :shock: 35 turns is way too many for me. |
Is it a kevlar wrapped arm, like aroung the windings around the poles? Im makin 14,000 rpm from my 32 turn at 5 volts... Im gunna run a 3 cell:shock: |
Scattman, you could run my hand wound 75 turn.. :lmao::lmao::lmao: |
You better find some more RPM's if you wanna hang with me. :flipoff::flipoff: You ........35 turns @ 12.6 volts charged(11.1 volts nominal) Me..........19 turns @ 25.2 volts charged(22.2 volts nominal) :lmao::lmao::lmao::lmao: |
WELL......... im thinking of winding a 12 turn:shock::shock: Or using a 19 or 15 turn.:lmao: |
If one of your wheel nuts get loose, im gunna be ducking from a small tire going 150mph. Everyone look out.:lmao::lmao: |
CVD's frt and rear now on the scaler. "thumbsup" Now I won't have to be so easy on it. |
2 Attachment(s) Scattman, look at this its a 6 turn:shock::shock::shock: 32,000 rpm at 5 volts...... soo 80,000 rpm :lmao: Attachment 151810 Attachment 151811 |
All times are GMT -6. The time now is 06:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com