Go Back   RCCrawler Forums > Regional > Southeast > Florida
Loading

Notices

Thread: NewRed Hobbies January 30

Reply
 
LinkBack Thread Tools Display Modes
Old 12-31-2010, 08:08 AM   #1
Looking for new Trails
 
yoda@4x4's Avatar
 
Join Date: Dec 2008
Location: GPS locating signal.....
Posts: 558
Default NewRed Hobbies January 30

www.newredhobbies.com
For directions or any other info....
January 30
3 Trucks per-person.
$12.00 for the first truck $8.00 for the second truck. third truck 5.00.....
Gate's open at 8:00 am
First event will be show n' shine at 10:00 am Driver's MEETING.....
10:20 am first event depending on how many entry's will be running two class's at the same time....

Classes will be........( you get your class at sign up after your rig is looked over )

2.2 MOA
Usrcca rule will apply
2.2 Shafty

2.2 Scaler
Sorrca rules will apply
1.9 scaler

OPEN MOD Run What you Brung...Must look Scale/or tube chassis, half chassis Any Chassis, Motor, ESC, Rear steer, Tire Size, axles set(no moa), tranny, no weight limit........Run what you brung......

you will be judged on a comp level in all events and Classes( to make you better drivers.....
you will have to bring your ride to tech and get weight in and looked over



Events will be MUD BOGG, HILL CLIMB, SLED PULLS, AND CHALLANGE CHOURSE

All event count no section will be dropped and you will be judged accordingly.......

RULES : : All trucks must go to tech at REGISTRATION if you are competing

Challange chourse : during this event you will be judged on time and performance, All COMP rule's will apply.

Sled Pulls : Truck weight limit is what you weight in at tech.....
No snatching of the sled, solid pull, when you stop your done....

MUD BOGG : Striaght run there will be out of bound marker if hit that is where you stop.... (Speed is your friend here)

Hill climb : Markers will be up and they count........

Crawlers will run 3 course's 2 short 1 long

if you have any qustions please call me 352-572-6387 or post them or pm.. me....

Last edited by yoda@4x4; 01-24-2011 at 12:01 PM.
yoda@4x4 is offline   Reply With Quote
Sponsored Links
Old 12-31-2010, 03:55 PM   #2
Rock Crawler
 
Join Date: May 2007
Location: floriduh
Posts: 522
Default

Are you ever just going to have fun gtg's and not always a competition?
badBKO is offline   Reply With Quote
Old 01-01-2011, 01:39 PM   #3
Quarry Creeper
 
Join Date: Feb 2010
Location: melbourne
Posts: 215
Default

Is there going to be mud? I need to no so i can setup my truck for water or not thanks Charles
muddbogger is offline   Reply With Quote
Old 01-01-2011, 04:53 PM   #4
Quarry Creeper
 
Join Date: Sep 2005
Location: Geneva, FL
Posts: 334
Default

Quote:
Originally Posted by badBKO View Post
Are you ever just going to have fun gtg's and not always a competition?
x2

and i thought you were gonna split up the "comps"..... so there would be no bitching and moaning from the bitching and moaners...
RebelRacer is offline   Reply With Quote
Old 01-01-2011, 04:59 PM   #5
Official Cook of the ECC
 
Scattman's Avatar
 
Join Date: Dec 2005
Location: Hawthorne, Florida
Posts: 2,653
Default

I'll make sure to have mine on display for all to see so there will be no hear-say afterwards, even thouh it was all BS last time.
Scattman is offline   Reply With Quote
Old 01-01-2011, 05:12 PM   #6
RCC Addict
 
Join Date: Sep 2009
Location: Bradenton
Posts: 1,300
Default

scatman you running 2.2 on the jeep?
chicostaxxs007 is offline   Reply With Quote
Old 01-01-2011, 05:17 PM   #7
Official Cook of the ECC
 
Scattman's Avatar
 
Join Date: Dec 2005
Location: Hawthorne, Florida
Posts: 2,653
Default

Yeah but am trying to build a clone to it to run 1.9 with. It goes like stink with 1.9's(used to run it with 1.9's) so I know how it will perform.

Probably gonna drop running the comp rig to concentrate more on the scalers. Gonna start taking it serious.
Scattman is offline   Reply With Quote
Old 01-01-2011, 05:21 PM   #8
RCC Addict
 
Join Date: Sep 2009
Location: Bradenton
Posts: 1,300
Default

Quote:
Originally Posted by Scattman View Post
Yeah but am trying to build a clone to it to run 1.9 with. It goes like stink with 1.9's(used to run it with 1.9's) so I know how it will perform.

Probably gonna drop running the comp rig to concentrate more on the scalers. Gonna start taking it serious.
well im going to try and make this one i need to put mine to the test
chicostaxxs007 is offline   Reply With Quote
Old 01-01-2011, 05:22 PM   #9
Official Cook of the ECC
 
Scattman's Avatar
 
Join Date: Dec 2005
Location: Hawthorne, Florida
Posts: 2,653
Default

Quote:
Originally Posted by RebelRacer View Post
x2

and i thought you were gonna split up the "comps"..... so there would be no bitching and moaning from the bitching and moaners...
Running them together didn't cause what happened, the bringing stuff up afterwards instead of during the comp, or during the 2 hours I stood around after we were done by the finger-pointers is what caused that.

I didn't piss and moan, I called people out on BS. Fine line between winning and whining.
Scattman is offline   Reply With Quote
Old 01-02-2011, 02:55 PM   #10
Pebble Pounder
 
Join Date: Jun 2010
Location: ocala
Posts: 121
Default

I'm in. Are you still going to run the ttc format? I will have to bring a scaler so i don't miss out on the drama, gotta love the he said she said .........
beidave is offline   Reply With Quote
Old 01-02-2011, 08:07 PM   #11
Rock Crawler
 
Join Date: Apr 2010
Location: Central FL
Posts: 509
Default

I might bring my shafty back out. Hopefully I can redeem myself for the crappy run on the rocks (that second gate was pure evil)
version_three is offline   Reply With Quote
Old 01-02-2011, 09:08 PM   #12
Pebble Pounder
 
Join Date: Oct 2010
Location: florida
Posts: 138
Default

I wonder if it will look like this again. lol
Im not whining
Name:  scaler.jpg
Views: 187
Size:  95.1 KB
I might boost my scalers performance with different color beedlock rings..... And oh yeah, the 32 turn motor I wound
out4crawlin is offline   Reply With Quote
Old 01-02-2011, 09:12 PM   #13
Official Cook of the ECC
 
Scattman's Avatar
 
Join Date: Dec 2005
Location: Hawthorne, Florida
Posts: 2,653
Default

I wonder how a 19 turn handwound would do on 6S lipo? 35 turns is way too many for me.
Scattman is offline   Reply With Quote
Old 01-02-2011, 09:15 PM   #14
Pebble Pounder
 
Join Date: Oct 2010
Location: florida
Posts: 138
Default

Is it a kevlar wrapped arm, like aroung the windings around the poles?
Im makin 14,000 rpm from my 32 turn at 5 volts... Im gunna run a 3 cell
out4crawlin is offline   Reply With Quote
Old 01-02-2011, 09:16 PM   #15
Pebble Pounder
 
Join Date: Oct 2010
Location: florida
Posts: 138
Default

Scattman, you could run my hand wound 75 turn..
out4crawlin is offline   Reply With Quote
Old 01-02-2011, 09:17 PM   #16
Official Cook of the ECC
 
Scattman's Avatar
 
Join Date: Dec 2005
Location: Hawthorne, Florida
Posts: 2,653
Default

You better find some more RPM's if you wanna hang with me.

You ........35 turns @ 12.6 volts charged(11.1 volts nominal)

Me..........19 turns @ 25.2 volts charged(22.2 volts nominal)


Last edited by Scattman; 01-02-2011 at 09:20 PM.
Scattman is offline   Reply With Quote
Old 01-02-2011, 09:22 PM   #17
Pebble Pounder
 
Join Date: Oct 2010
Location: florida
Posts: 138
Default

WELL......... im thinking of winding a 12 turn

Or using a 19 or 15 turn.
out4crawlin is offline   Reply With Quote
Old 01-02-2011, 09:24 PM   #18
Pebble Pounder
 
Join Date: Oct 2010
Location: florida
Posts: 138
Default

If one of your wheel nuts get loose, im gunna be ducking from a small tire going 150mph.
Everyone look out.
out4crawlin is offline   Reply With Quote
Old 01-02-2011, 09:29 PM   #19
Official Cook of the ECC
 
Scattman's Avatar
 
Join Date: Dec 2005
Location: Hawthorne, Florida
Posts: 2,653
Default

CVD's frt and rear now on the scaler. Now I won't have to be so easy on it.
Scattman is offline   Reply With Quote
Old 01-02-2011, 09:36 PM   #20
Pebble Pounder
 
Join Date: Oct 2010
Location: florida
Posts: 138
Default

Scattman, look at this its a 6 turn 32,000 rpm at 5 volts...... soo 80,000 rpm
Name:  6 turn motor 2.jpg
Views: 193
Size:  76.1 KB

Name:  6 turn motor.jpg
Views: 177
Size:  69.0 KB
out4crawlin is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 11:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com