what servos are yall running ..... I fried my solar 722 at New Reds, Sooooo i was wondering what my other Florida peeps are running. My truck is an scx 10 with 1.9 and used moslty as a trail/bash rig, with the occasional TTC mixed in My biggest concern is toughness/reliability. Thanks in advance ... Cory |
Re: what servos are yall running ..... traxxas 2075, i have been running it on my scx10 1.9s for 2 years now and never had an issue with it, i may have got the only good one but i have had luck with mine and i had a more scale speed when i turn |
Re: what servos are yall running ..... I run savox in all my rigs. right now i got a savox 1258tg high speed in my scx on 2.2 claws and it works like a champ but i would recomend a high torque not high speed |
Re: what servos are yall running ..... Quote:
I have run Savox and HiTec for all my rigs and the only thing with savox is VOLT'S they truly need a BEC on them, At this time I am running the HiTec 645mg in my kids wraith and 7955 in my chevy 2.2 TTC rig in my Orange jeep I am running a 7955 becuase with them you can get Torque oz./in. (4.8V/6.0V):250 / 333 and not need a BEC to run them and still get the power you need.. some sevo's need 7.4 volts and with that kind of volts you need a BEC to supply the right power for the torque and speed Hitec RCD HS-7955TG V2 High Res. Ultra Torque Titanium Gear Servo Just my 2 cents |
Re: what servos are yall running ..... 7955tg hitec in all of mine. |
Re: what servos are yall running ..... All 5 of the crawl ugly rigs run the Hitech HS-645MG. Mainly because were cheap asses though :mrgreen: Seriously though we have not once had any issues out of them and on my rig and my sons rig i havent even waterproofed them and they just keep going. |
Re: what servos are yall running ..... UPDATE after years of use the servo took a dump yesterday and i had to replace it. i guess thats what i get for opening my mouth......:roll: |
Re: what servos are yall running ..... Quote:
LOL that's funny right there...........:lmao::lmao::lmao: |
Re: what servos are yall running ..... Thanks fellas, i had a 645mg laying around from my SC trucks ...... sooo it's being water proofed and repurposed as I type....... I hope this will work till i can drop coin on a better servo... |
Re: what servos are yall running ..... Well.......the 645mg didn't last long. It worked great for a short time, but now it seems really weak to one side. I'm not sure if this is connected but I recently changed over to CMS. When the truck is in the air with the axles hanging it works fine. When it is on the gound with the weight of the truck on it, no beuno :x. any suggestions? Also, I've been running a XL-5 and TRX reciever and 2.4 transmitter with 5000mAh 2s 40c lipos |
The cms is harder on servos. I run a cs-170 (333oz @ 6v) on my scx. It was a monster till I switched to cms, then it seemed to be, less then, it was. I recently gained a nip 7954 from a trade (403oz@ 7.4). So it's goin in. I run hitec an cc bec in all my rigs .. |
Re: what servos are yall running ..... Quote:
are you using a bec if so what voltage are you running it at? |
Re: what servos are yall running ..... No bec. Honestly i wouldn't even know how to install one with the XL5. I did Check the specs on it though. It's supposed to give 6v and 1 amp from the built in bec. |
It's one of the easiest, best, cheapest upgrades you can do for ur rig.... IMO Wire it to the battery side of ur ESC, solder red an black wires... For the easiest option, contact, Chris the battery man. You can get the bec set an one of his connectors from bec to servo... Then it's just two wires for the power you haves to deal with. |
Re: what servos are yall running ..... Quote:
|
Re: what servos are yall running ..... Thank you middle Ugly....:) I will probly attempt it prior to that. I am really gonna shoot for NewReds and Daytona. It all depends on work and a stupid promotional process I'm in. I kinda think RC manufacturers are similar to auto manufacturers....numbers can be stretched |
Re: what servos are yall running ..... We don't say "promotion" around here because the last guy that got one of those disappeared afterwards. |
Re: what servos are yall running ..... Quote:
That he did o where are you lil buddy |
Re: what servos are yall running ..... just click your heels joe! theres noplace like home! x3 |
Re: what servos are yall running ..... traxxas waterproof digital in my brushless rig and waterproof digital Hitechs in my jeep and hilux |
Re: what servos are yall running ..... DO NOT USE THE HS-5645MG!!! They suck for what we do! |
Re: what servos are yall running ..... Quote:
|
Re: what servos are yall running ..... best place to purchase and cost of these servos is what? L.R. |
Re: what servos are yall running ..... i get mine off rpp hobby. sometimes there on flea bay for a lil bit cheaper |
Re: what servos are yall running ..... |
Re: what servos are yall running ..... Savox SA 1230 --500 oz. $75.00"thumbsup" |
HiTec 7954 7955 7950 yoda4x4 |
Re: what servos are yall running ..... So I figured out what happened to my old Solar 772........ Watta!!!!:twisted: Yup, I didn't get it waterproof enough. So with that being said I'm gonna give them another shot, only this time I ordered a backup just incase I screw it up again...... Better to learn how to wproof on cheap servos than expensive ones....:lmao: Oh by the way, the old 772 didn't go to waste, I was able to salvage the motor and apply another board and fab up a winch.... |
Re: what servos are yall running ..... Looking through this thread and stumbled upon this CYS S8218 Digital 6V 7 2V 0 18SEC 60°A 164g Metal Gear 40kg High Torque Servo | eBay This 40kg cm converts to about 555oz in! Anyone have any experience with them? |
Re: what servos are yall running ..... Hello. I´m looking for a good servo for my scx10 and for my wrait "all condition edition" Caution! the CYS S8218 have very big dimmensions for our crawlers. 60x29x55mm Thanks. Merry Christmas |
Re: what servos are yall running ..... Since learning how to to waterproof better I have had no problems with my solar servos. The only down side is that they are a little noisey. I have not put a BEC on my rig yet. |
Re: what servos are yall running ..... Just slapped a D772 on my SCX10 along with a BEC at 7.4V. Havn't waterproofed yet, but plan on it (I've got 3 others, 1 for a winch, one for a rig that's in the mail, and a spare) I can't report how the servo does though yet as i've only taken it around the parking lot at my apt. |
Re: what servos are yall running ..... Quote:
Good servo for the price but pulls some volt's so use a BEC and that thing is a monster I had one in my comp rig.... |
Re: what servos are yall running ..... Quote:
I ended up completely covering the circuit board with die electric grease and liquid electric taping/oring the outer housing. Have had no problems with it yet. 2 comps and many trail rides. |
Re: what servos are yall running ..... Even just in the parking lot (and inside on the carpet) the D772 is a HUGE improvement over the Traxxas 2075 it's replacing. Went with a chassis mounted servo and the Traxxas wasn't up to the task of turning left anymore. I'll be removing the AS-3 servo as well as soon as the Deadbolt comes in lol |
Re: what servos are yall running ..... Anyone know which programmer is for the hitec 7955th? |
All times are GMT -6. The time now is 09:32 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com