spur gear options
 

i am running an ax10 tranny and was wandering were and what gear "tooth number" to experiment with and where would be a good place to buy from. i get most my stuff from ebay and need to know what to search for. like tooth numbers right now i have a axial with 87t spur, 48 pitch, 23t pinion, 35t integy motor, 3s 90c lipo, sand paws. yeh i know i have a crawler motor in it. but this is just starting this build from a crawler base. i have a 6900kv going in and that should turn it up just a little haha. but what are some spur gears i can play with and where/what to look for.

Re: spur gear options
 

an associated NTC3 spur will fit part no 2266. its 32p pitch and is tougher than the stock axial spur. you will also need a matching pinion about 14 tooth.

Re: spur gear options
 

I'm on 54t Spur / 14t Pinion 32 Pitch...

..