Spur/Pinion options ~ Wraith?

[SwampDawg]

i read sometime ago on something about a 32pitch setup for the Wraith...what spur does this come off of?

and what should i run for a FOFF rig for Spur/Pinion?

[Hunter711]

Spur Gears: 32P - Kimbrough Racing Products - RC Spur Gears, Pinion Gears, Servo Savers
Depending on horsepower (3-4s) I run 18-22 pinion w/ 44t spur. This formula changes w/tire size (rollout).
I also like aluminum pinions such as Castle Creations http://www3.towerhobbies.com/cgi-bin...?&I=LXXWJ3&P=M .
If motor shaft size is 3mm and pinion is 5mm, I'll use reducer TowerHobbies.com | RRP1200 1200 Robinson Racing Reducer Sleeve 5mm-1/8"
MIP driveshafts are a must for this much power, as are hardened gears in diff and tranny (I like VP tranny case for strength). Again diff gears will very depending on tire size.

Good luck, and happy hunting .

[The Violator]

I a stock slash 4x4 slipper on my wraith. I had one laying around, and all the parts will fit on the axial input shaft. I figured you should almost always be able to find a stock slash 4x4 spur anywhere. If you run a funky spur that you have to mail order, then order extras, lots of them.

[SwampDawg]

Originally Posted by Hunter711

Spur Gears: 32P - Kimbrough Racing Products - RC Spur Gears, Pinion Gears, Servo Savers
Depending on horsepower (3-4s) I run 18-22 pinion w/ 44t spur. This formula changes w/tire size (rollout).
I also like aluminum pinions such as Castle Creations TowerHobbies.com | CSE010-0065-02 010-0065-02 Castle Creations CC Pinion 32P 20T .
If motor shaft size is 3mm and pinion is 5mm, I'll use reducer TowerHobbies.com | RRP1200 1200 Robinson Racing Reducer Sleeve 5mm-1/8"
MIP driveshafts are a must for this much power, as are hardened gears in diff and tranny (I like VP tranny case for strength). Again diff gears will very depending on tire size.

Good luck, and happy hunting .

wheels will be 2.2 as standard equipment using the ProLine SandPaws.

As of lastnight ive stripped my Nitro Savage down and
threw all my upgrades onto the Flux. Aint giving those away to anyone! with this trade im hoping to get a 1:10 brushless motor/esc. Not sure what my LHS has but i know they have a great selection. Never even thought of the gear ratio on the diffs. hmmmm!

looks like i have my work cut out for me here lol

Originally Posted by The Violator

I a stock slash 4x4 slipper on my wraith. I had one laying around, and all the parts will fit on the axial input shaft. I figured you should almost always be able to find a stock slash 4x4 spur anywhere. If you run a funky spur that you have to mail order, then order extras, lots of them.

thanks, ill look for the 4x4 slash spur for my rig!

[DRV KRAWLER]

Originally Posted by SwampDawg

wheels will be 2.2 as standard equipment using the ProLine SandPaws.

As of lastnight ive stripped my Nitro Savage down and
threw all my upgrades onto the Flux. Aint giving those away to anyone! with this trade im hoping to get a 1:10 brushless motor/esc. Not sure what my LHS has but i know they have a great selection. Never even thought of the gear ratio on the diffs. hmmmm!

looks like i have my work cut out for me here lol



thanks, ill look for the 4x4 slash spur for my rig!

I used :
Robinson Racing 32p / 23t pinion
Kimbrough 32p / 44t Sput gear
Traxxas Brushless / ESC
Axial over drive geared axles

The Kimbrough and Robinson gears fit inside the Spur gear cover also.

[SwampDawg]

ill give that a try then!
32p/23t pinion
32p/44t spur

as for the Axial "overdrive geared axles", what is this?
sorry i am relatively new to FOFF and never toy'd with one before

[Hunter711]

TowerHobbies.com | AXIAX30401 AX30401 Axial Heavy Duty Bevel Gear Set 36T/14T AX10
This is for 2 sets of gears, 1 front diff, 1 rear.
Got's to pay to play .

[SwampDawg]

i cant seem to find a 32p/44t spur anywhere?
ive looked at Traxxas.com & called my LHS, and they dont have a clue?
there is nothing that comes even close to this spur?

[DRV KRAWLER]

Originally Posted by SwampDawg

i cant seem to find a 32p/44t spur anywhere?
ive looked at Traxxas.com & called my LHS, and they dont have a clue?
there is nothing that comes even close to this spur?

Here you go :
Kimbrough 32 Pitch Spur Gear, 44T KIM115 | eBay

http://www.ebay.com/itm/Robinson-Rac...item2ebfe8e7e5