Hong Nor X1-CRT a.k.a Wanderer http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010151.JPG Technical data: Car: Hong Nor X1-CRT Transmission: Original diffs ESC: Mamba Monster Max Servo: Savöx SV-1271SG BEC: Castle Creations 10A Motor: Castle Creations 1515 2200kv Tires: Panther Paddle 3.2" Wheels: Maximizer 3.2" Beadlocks Battery: Gens Ace 2200mAh 30-60C 5S LiPo Radio: Spektrum DX3R Body: Custom "Dragonlady" Competition number: #1 |
Re: Hong Nor X1-CRT a.k.a Wanderer Okey, spring is getting closer here in Finland and now it's time to build a new Unlimited class rig. I had driven five years with my old rig and allthought it was unstoppable in the hills, it was time to put it on a shelf. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0178.JPG I got the wheels and tires from my previous rig. That's the new body for the rig. If everything will go as planned, it'll get a Krawler Konceptz treat. "thumbsup""thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0179.JPG Here is what I'm starting with. I bought it used and it had broken rear diff and pinion. Gotta fix those, when I find the parts. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0180.JPG Front axle is ready to go! 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0181.JPG Some working with the rear of the car is to be done. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0183.JPG That's where I got so far. I have to buy some parts first and then I can start building it. A little over a month to the first comp. :flipoff: I will have to hurry! :shock: |
Re: Hong Nor X1-CRT a.k.a Wanderer NO welding! Wow that just blew my mind. Is that brake line? Looking forward to seeing what you do with it. |
Re: Hong Nor X1-CRT a.k.a Wanderer Quote:
|
Re: Hong Nor X1-CRT a.k.a Wanderer Stuff started to walk in. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0194.JPG I want this thing to turn! :flipoff: ProTek RC PTK-170S Chad Bradley Team Edition! http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0195.JPG Specifications: Recommended Application 1/10 to 1/8 Scale Surface Operating Voltage 4.8V – 7.4V Operating Temperature 14° to 140° F (-10 to +60° C) Operating Speed @ 6.0V 0.09/60° sec Operating Speed @ 7.4V 0.07/60° sec Dynamic Torque @ 6.0V 445 oz-in (32.0 kg-cm) Dynamic Torque @ 7.4V 549 oz-in (39.5 kg-cm) Motor Type High Efficiency Coreless Motor Output Shaft 25 Tooth Gears Metal Weight 73.8g Pulse/Frequency 1520μs / 333hz Should be plenty enough for this beast!! :twisted: |
Re: Hong Nor X1-CRT a.k.a Wanderer What I don't get about these high voltage servo specs is that they rate it to 7.4v. A high voltage servo is supposed to work on 2S LiPo (I've asked AMain/ProTek a few years ago and yes, their HV servo's are designed to run safely on 2S), which is *nominally* 7.4V but peaks at 8.4V (4.2V per cell). So to be able to run on 2S liPo it should handle 8.4V without problems. So why not rate it 8.4V ? |
Re: Hong Nor X1-CRT a.k.a Wanderer Quote:
Let's get this project on the way! I've finished my crawlers, so now it's time to put the foff rigs on the move. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0296.JPG My starting point. :lmao: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0297.JPG Fortunately I've got company! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0298.JPG Bought some wider hexes for it. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0299.JPG And new rear diff gearing. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0300.JPG All the spare parts in there. Let's see what I need. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0301.JPG Here's the old diff. To my naked eye, I don't see the gearing as big problem as the bearing on the right side. :flipoff::flipoff: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0302.JPG New diff housing as well. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0303.JPG Will change everything just to be sure. ;-) http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0304.JPG Diff reassembled. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0305.JPG Some of this magnificent Vanquish Products grease on it and it's ready to rumble again. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0306.JPG Attaching the diff housing to the rear axle. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0307.JPG Well greased! 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0308.JPG Few screws to attach still. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0309.JPG I'm beginning to see the bigger picture here! :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0310.JPG Ladies and gents - we have a roller!! 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0312.JPG Diff works. :lmao: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0313.JPG It looks awesome as a roller IMO. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0314.JPG From the rear. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0315.JPG Next job would be repainting the body. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0316.JPG And the electronics workout after that. :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0317.JPG Weight as a roller. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0318.JPG Aprrox. weight RTR. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0319.JPG Gonna run it with 5S and 2200kv motor. Same set as my previous rig. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0320.JPG Battery fits on the box perfectly. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0321.JPG Here are my both foffers. They will be comp ready after this weekend. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0322.JPG I'll continue with painting and electronics today in the garage. I want to test it today!! "thumbsup" |
Re: Hong Nor X1-CRT a.k.a Wanderer Okey, spend some more time at the garage yesterday. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0323.JPG Servo was going to change in the last minute. The Protek will go to my modified class rig and the Savöx will be for this. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0324.JPG Motor found it's place quickly. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0325.JPG I wasn't build for soldering. So I got some help. :flipoff: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0326.JPG Servo is on the spot now as well! http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0327.JPG It's easier like this. You have all the places ready for the electornics and you don't have to start building mounts for them. :lmao: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0328.JPG Quickly attached ESC and tested with a low EPA's first. Dont want it to go full throttle with 5S LiPo. :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0329.JPG Everything works. Time to start soldering. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0332.JPG Thank god, I only have to do this max. once in a year. :ror: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0334.JPG Don't need zip ties for the wiring. It's tight enough. :flipoff: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0335.JPG Hmmmmm.... http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0336.JPG It's all there! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0337.JPG All the electronics are now on their spots. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0338.JPG Tight tolerances for the wiring indeed. :roll: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0339.JPG Insert battery here. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0340.JPG Ready for first testdrive! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0341.JPG Model named now as well. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0342.JPG Nothing went wrong this time! Everything works as they should. "thumbsup" Power seemed to be left in the batteries as well. :flipoff: Can't wait to go to the hills with it. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0343.JPG That's the weight RTR for now. "thumbsup" Tomorrow we are heading for some local gravel pits to test these rigs. Hopefully everything will go as planned, cause the season opener is just one week away now! :shock: |
Re: Hong Nor X1-CRT a.k.a Wanderer Time to get up and out! :flipoff: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010002.JPG Thrilled to see this beast on the hill. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010005.JPG So far so good! 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010006.JPG This thing seems to be unstoppable. I gave it some really hard time out there to see the possible weak points. :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010007.JPG It seemed, that the batteries had also waited for the summer. :ror: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010008.JPG In the whole half an hour bashing nothing broke. That's kind of a record for me! :shock: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010012.JPG It still needs fine tuning on the suspension and steering, but all of those I can do next week. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010035.JPG Both of my rigs were awesome today. Can't wait to start the season next weekend! 8) <iframe width="640" height="360" src="https://www.youtube.com/embed/cSXX3i1C8AE?feature=player_detailpage" frameborder="0" allowfullscreen></iframe> Here is the first half of the battery on video! "thumbsup" As you can see, I gave it a little bit extra throttle here and there. :flipoff: Next thing would be painting the body. After that some tuning and then it's ready for it's first comp! |
Re: Hong Nor X1-CRT a.k.a Wanderer Quote:
|
Re: Hong Nor X1-CRT a.k.a Wanderer Time to finish this rig for it's debyt comp! http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0367.JPG First layer of paint to the body. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0369.JPG Second one. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0381.JPG I made some changes to the rig itself after the first practise session. Roll bars from front and rear are now gone. They just don't work in environment like this. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0382.JPG All that sand came off from the rig. :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0383.JPG Secured all the screws as well. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0385.JPG Almost done! http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0386.JPG Third layer of paint drying. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0387.JPG What the actual f***?! :shock: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0388.JPG Oh dear god... I ruined it. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0389.JPG Or? http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0390.JPG Did I? http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0391.JPG Probably yes. :flipoff::flipoff: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0392.JPG The artist in me. :flipoff::flipoff::lmao: http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0393.JPG I'm pretty happy about it though. It wasn't supposed to be pretty. 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0394.JPG Decals do a lot for this body. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0396.JPG It's ready for the battle! There will be over ten rigs on the line so it'll be one hell of a fight! But I'm confident. "thumbsup" http://pnc.pp.fi/RC/FOFF/Cupit/Foff%...C%231_2015.gif Let's have some fun shall we! ;-) Pics and videos will follow. "thumbsup" |
Re: Hong Nor X1-CRT a.k.a Wanderer Wanderer's debut comp is now behind. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010013.JPG That's a rispectful amount of rigs in the line. There hasn't been so many since 2010. :shock: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010023.JPG All shapes of rollcages. 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010151.JPG Course three waiting for Wanderer. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010154.JPG Off we go! http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010159.JPG Rig seemed to be relatively easy to predict, which is helping a lot in driving. :) http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010160.JPG First two courses went well and rig managed to do nearly every gate. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010161.JPG The bottom of the hill reached again. Time to go up! http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010165.JPG Clean performance so far! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010169.JPG Time to give it all for perfection. :twisted: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010170.JPG The reason why I've been driving foff ten years now. 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010294.JPG And another perfect score with a nice flight! :ror: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010301.JPG Wanderer takes off to the last course. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010302.JPG Can't really say I'm dissapointed with the rig. It does everything that my old rig would've done. "thumbsup" Some parts even better. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010303.JPG On the 200 point gate. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010304.JPG Final effort to reach the top of the last course. Wasn't able to do that, but I'm still pleased with the result. <iframe width="640" height="360" src="https://www.youtube.com/embed/odCQnkaBuYU?feature=player_detailpage" frameborder="0" allowfullscreen></iframe> Here we have course five on video. This was really the decider for my success. Only one to make it to the top. With style! 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0415.JPG Victory just ahead of my team mates. What a retard pic.... :ror: http://paron.pp.fi/TULOKSET/FOFF/201...S%e4kyl%e4.jpg And finally the results. As you can see it really was a tight comp from start to finish. Can't except nothing more from the next comp after two weeks. "thumbsup" Hopefully we'll get that many rigs on the line in there too. This was a really good way to start this rig's career and season! 8) |
Re: Hong Nor X1-CRT a.k.a Wanderer I'm ready for tomorrows Foff Cup #2! http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0452.JPG No changes after the first comp. I'll go there to learn new things about the rig. "thumbsup" http://pnc.pp.fi/RC/FOFF/Cupit/Foff%...2015C2_640.jpg "April Dust". There's fourteen rigs registered for unlimited class tomorrow. Should be a fight of a century! Doin my best and knowing this thing is a winner! ;-) |
Re: Hong Nor X1-CRT a.k.a Wanderer Comp number two is in the books! http://paron.pp.fi/ZT%20Mekkausmekka...0003%20(2).JPG It was held in southern Finland last saturday. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010107.JPG Thirteen rigs were due to start! :shock: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010108.JPG I don't remember seeing this kind of fleet in ages! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010195.JPG First course. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010196.JPG I got the advantage of driving in other rigs tire marks. It's like train rails. :ror: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010199.JPG Up! http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010200.JPG The start of this course was easy. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010201.JPG Down again! This thing really moves when you pull the throttle! :flipoff: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010203.JPG Last two gates were really tough! http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010204.JPG Got just a little bit grip from the cliff, but the nose was already heading to wrong direction... :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010205.JPG Down again we go. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010259.JPG Course three next. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010261.JPG In this course the last gate was long vertical cliff. Couple of rigs in front of me did a huuuge 360 degrees in the air and landed on their tires on the top. I just wanted a clean performance to continue in the lead. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010266.JPG I'm slowly beginning to learn this rigs basic behaviour. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010274.JPG Off we go to the last gate. FULL THROTTLE! :shock: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010275.JPG There it is! Touched the white marked, but got myself to the top! 8) http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010484.JPG Course five. A big problem was the visibility for some reason on this course. :mrgreen: http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010487.JPG And these tires don't even throw the sand like Proline Maxx Paddles. http://paron.pp.fi/ZT%20Mekkausmekka...5/P1010491.JPG I almost made it to the top. <iframe width="854" height="510" src="https://www.youtube.com/embed/0j3Er_0Tbsw" frameborder="0" allowfullscreen></iframe> Here is my best performance of the day. From course three. Jump included! 8) http://paron.pp.fi/TULOKSET/FOFF/201...0Kangasala.jpg Besides all good perfomances, I had one bad which ruined my comp entirely. I rolled over at the first gates of the timed course. That means zero poitns from there. This is something that doesn't happen to me every day. Now it did and it was all because I was reling too much in the balance of the new rig. Well, shit happens and it left me with postition five. After the comp I bashed with the car a bit and the motor got jammed. I'll have to see, what's the problem there, but I suspect it's the front bearing that has collapsed. There's good two weeks before the next comp, so I have plenty of time to order a spare. "thumbsup" |
Re: Hong Nor X1-CRT a.k.a Wanderer Have loved the pics you have posted on FB of these amazing rigs Samu. Would be great to get an F1 Off Road scene here. Great excuse to hit the beach."thumbsup" |
Re: Hong Nor X1-CRT a.k.a Wanderer Quote:
|
Re: Hong Nor X1-CRT a.k.a Wanderer Yep, just as I suspected... http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0459.JPG The front bearing of my motor is in one million and two pieces. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0461.JPG Completely ruined. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0462.JPG That is quite badly stuck there. Gotta find a way to remove it without braking the can. http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0464.JPG Inside of the bearing on the rotor. For now, I'll order a new motor, which will be Castle Creations 2200kv motor. I'll fix this one and keep it as a spare. "thumbsup" |
Re: Hong Nor X1-CRT a.k.a Wanderer Motor update before the next battle! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0501.JPG My new Castle 1515 2200kv motor arrived just in time. "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0502.JPG Slightly longer can. More torque in this beast! "thumbsup" http://paron.pp.fi/ZT%20Mekkausmekka...5/IMG_0504.JPG Tested it out with 13t pinion. It doesn't go as fast, but the speed is plenty enough I think. But the better thing would be the low end torque which this motor offers. Interesting to see it on the hills. "thumbsup" http://pnc.pp.fi/RC/FOFF/Cupit/Foff%...enjoki_640.jpg Twleve rigs on the line in search for gold and glory! "thumbsup" Comp is on sunday and I'm ready for it. Bring it on! 8) |
Re: Hong Nor X1-CRT a.k.a Wanderer Looks good! Do the tires stay on the wheels with just the beadlock or did u uae any silicone? |
Re: Hong Nor X1-CRT a.k.a Wanderer All the best for Sunday Samu, looking forward to seeing the footage."thumbsup" |
All times are GMT -6. The time now is 06:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com