Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > G-Made Crawlers


Thread: Gmade driveshafts

LinkBack Thread Tools Display Modes
Old 12-21-2011, 10:17 AM   #1
Quarry Creeper
Join Date: Apr 2008
Posts: 294
Default Gmade driveshafts

I just bought the hd steel replacement driveshafts for my r1, The question is the set screws that come with the driveshafts, I would rather use the stock set screw pins that came with the plastic stock shafts,but of coarse the threads are different sizes,just thinking the steel shafts might slip if Iam hard on the throttle,anybody have any thoughts on useing these steel gmade shafts? or has any one used the screw pins instead of the set screws, if so what kind?
crawlernut is offline   Reply With Quote
Sponsored Links
Old 12-21-2011, 10:48 AM   #2
Join Date: Sep 2011
Location: In the Hills
Posts: 17
Default Re: Gmade driveshafts

I have used the stock set screws in all of my junfac steel drive shafts without any issues with the threads . I have also used the axial set screw part #AXA175 in the junfac steel drive shafts. You can get them here if you LHS does not have any. Axial Wraith Screw Shaft M3x2.5x11mm (10pcs
Jeeptrick is offline   Reply With Quote
Old 12-21-2011, 11:40 AM   #3
Quarry Creeper
Join Date: Apr 2008
Posts: 294
Default Re: Gmade driveshafts

Thankyou, Ill be stopping by my lhs on the way home,just dont care for the junfac set screws that came with the steel shafts.
crawlernut is offline   Reply With Quote

Gmade driveshafts - Similar Threads
Thread Thread Starter Forum Replies Last Post
gmade r1 exmark G-Made Crawlers 6 12-13-2011 11:25 AM
gmade AngryTradesman Testing 1 2 3 0 07-08-2010 12:27 AM
Gmade ? Bino_DK Newbie General 2 01-01-2008 10:15 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 02:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com